* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI/PM: Report wakeup events before resuming devices
PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
PCI: sysfs: Update ROM to include default owner write access
x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
PCI/ACPI: Request _OSC control once for each root bridge (v3)
PCI: enable pci=bfsort by default on future Dell systems
PCI/PCIe: Clear Root PME Status bits early during system resume
PCI: pci-stub: ignore zero-length id parameters
x86/PCI: irq and pci_ids patch for Intel Patsburg
PCI: Skip id checking if no id is passed
PCI: fix __pci_device_probe kernel-doc warning
PCI: make pci_restore_state return void
PCI: Disable ASPM if BIOS asks us to
PCI: Add mask bit definition for MSI-X table
PCI: MSI: Move MSI-X entry definition to pci_regs.h
Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)
* git://git.infradead.org/battery-2.6: (21 commits)
power_supply: Add MAX17042 Fuel Gauge Driver
olpc_battery: Fix up XO-1.5 properties list
olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW
olpc_battery: Add support for CHARGE_NOW
olpc_battery: Add support for CHARGE_FULL_DESIGN
olpc_battery: Ambient temperature is not available on XO-1.5
jz4740-battery: Should include linux/io.h
s3c_adc_battery: Add gpio_inverted field to pdata
power_supply: Don't use flush_scheduled_work()
power_supply: Fix use after free and memory leak
gpio-charger: Fix potential race between irq handler and probe/remove
gpio-charger: Provide default name for the power_supply
gpio-charger: Check result of kzalloc
jz4740-battery: Check if platform_data is supplied
isp1704_charger: Detect charger after probe
isp1704_charger: Set isp->dev before anything needs it
isp1704_charger: Detect HUB/Host chargers
isp1704_charger: Correct length for storing model
power_supply: Add gpio charger driver
jz4740-battery: Protect against concurrent battery readings
...
* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin:
kernel: fix hlist_bl again
cgroups: Fix a lockdep warning at cgroup removal
fs: namei fix ->put_link on wrong inode in do_filp_open
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
mfd: ab8500-core chip version cut 2.0 support
mfd: Flag WM831x /IRQ as a wake source
mfd: Convert WM831x away from legacy I2C PM operations
regulator: Support MAX8998/LP3974 DVS-GPIO
mfd: Support LP3974 RTC
i2c: Convert SCx200 driver from using raw PCI to platform device
x86: OLPC: convert olpc-xo1 driver from pci device to platform device
mfd: MAX8998/LP3974 hibernation support
mfd/ab8500: remove spi support
mfd: Remove ARCH_U8500 dependency from AB8500
misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage
mfd: Add __devexit annotation for vx855_remove
mfd: twl6030 irq_data conversion.
gpio: Fix cs5535 printk warnings
misc: Fix cs5535 printk warnings
mfd: Convert Wolfson MFD drivers to use irq_data accessor function
mfd: Convert TWL4030 to new irq_ APIs
mfd: Convert tps6586x driver to new irq_ API
mfd: Convert tc6393xb driver to new irq_ APIs
mfd: Convert t7166xb driver to new irq_ API
...
After recent changes related to wakeup events pm_wakeup_event()
automatically checks if the given device is configured to signal wakeup,
so pci_wakeup_event() may be a static inline function calling
pm_wakeup_event() directly.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Move the evaluation of acpi_pci_osc_control_set() (to request control of
PCI Express native features) into acpi_pci_root_add() to avoid calling
it many times for the same root complex with the same arguments.
Additionally, check if all of the requisite _OSC support bits are set
before calling acpi_pci_osc_control_set() for a given root complex.
References: https://bugzilla.kernel.org/show_bug.cgi?id=20232
Reported-by: Ozan Caglayan <ozan@pardus.org.tr>
Tested-by: Ozan Caglayan <ozan@pardus.org.tr>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The flags added by commit db16d5ec1f
has no user now. We believe we'll use it soon but considering
patch reviewing, the change itself should be folded into incoming
set of "dirty ratio for memcg" patches.
So, it's better to drop this change from current mainline tree.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion
betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit
registers. Besides, MAX17042 has much more features than MAX17040; e.g.,
a thermistor, current and current accumulation measurement, battery
internal resistance estimate, average values of measurement, and others.
This patch implements a driver for MAX17042.
In this initial release, we have implemented the most basic features of
a fuel gauge: measure the battery capacity and voltage.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
__d_rehash is dereferencing an almost-NULL pointer on my ARM926.
CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y.
The faulting instruction is: strne r3, [r2, #4]
and as can be seen from the register dump below, r2 is 0x00000001, hence
the faulting 0x00000005 address.
__d_rehash is essentially:
spin_lock_bucket(b);
entry->d_flags &= ~DCACHE_UNHASHED;
hlist_bl_add_head_rcu(&entry->d_hash, &b->head);
spin_unlock_bucket(b);
which is:
bit_spin_lock(0, (unsigned long *)&b->head.first);
entry->d_flags &= ~DCACHE_UNHASHED;
hlist_bl_add_head_rcu(&entry->d_hash, &b->head);
__bit_spin_unlock(0, (unsigned long *)&b->head.first);
bit_spin_lock(0, ptr) sets bit 0 of *ptr, in this case b->head.first if
CONFIG_SMP or CONFIG_DEBUG_SPINLOCK is set:
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
while (test_bit(bitnum, addr)) {
preempt_enable();
cpu_relax();
preempt_disable();
}
}
#endif
So, b->head.first starts off NULL, and becomes a non-NULL (address 1).
hlist_bl_add_head_rcu() does this:
static inline void hlist_bl_add_head_rcu(struct hlist_bl_node *n,
struct hlist_bl_head *h)
{
first = hlist_bl_first(h);
n->next = first;
if (first)
first->pprev = &n->next;
It is the store to first->pprev which is faulting.
hlist_bl_first():
static inline struct hlist_bl_node *hlist_bl_first(struct hlist_bl_head *h)
{
return (struct hlist_bl_node *)
((unsigned long)h->first & ~LIST_BL_LOCKMASK);
}
but:
#if defined(CONFIG_SMP)
#define LIST_BL_LOCKMASK 1UL
#else
#define LIST_BL_LOCKMASK 0UL
#endif
So, we have one piece of code which sets bit 0 of addresses, and another
bit of code which doesn't clear it before dereferencing the pointer if
!CONFIG_SMP && CONFIG_DEBUG_SPINLOCK. With the patch below, I can again
sucessfully boot the kernel on my Versatile PB/926 platform.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The first releases of LP3974 have a large delay in RTC registers,
which requires 2 seconds of delay after writing to a rtc register
(recommended by National Semiconductor's engineers)
before reading it.
If "rtc_delay" field of the platform data is true, the rtc driver
assumes that such delays are required. Although we have not seen
LP3974s without requiring such delays, we assume that such LP3974s
will be released soon (or they have done so already) and they are
supported by "lp3974" without setting "rtc_delay" at the platform
data.
This patch adds delays with msleep when writing values to RTC registers
if the platform data has rtc_delay set.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Allow MFD cells to have pm_runtime_no_callbacks() called on them during
registration. This causes the runtime PM framework to ignore them,
allowing use of runtime PM to suspend the device as a whole even if
not all drivers for the MFD can usefully implement runtime PM. For
example, RTCs are likely to run continuously regardless of the power
state of the system.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits)
ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework
ACPI: fix resource check message
ACPI / Battery: Update information on info notification and resume
ACPI: Drop device flag wake_capable
ACPI: Always check if _PRW is present before trying to evaluate it
ACPI / PM: Check status of power resources under mutexes
ACPI / PM: Rename acpi_power_off_device()
ACPI / PM: Drop acpi_power_nocheck
ACPI / PM: Drop acpi_bus_get_power()
Platform / x86: Make fujitsu_laptop use acpi_bus_update_power()
ACPI / Fan: Rework the handling of power resources
ACPI / PM: Register power resource devices as soon as they are needed
ACPI / PM: Register acpi_power_driver early
ACPI / PM: Add function for updating device power state consistently
ACPI / PM: Add function for device power state initialization
ACPI / PM: Introduce __acpi_bus_get_power()
ACPI / PM: Introduce function for refcounting device power resources
ACPI / PM: Add functions for manipulating lists of power resources
ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
ACPICA: Update version to 20101209
...
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
intel_idle: open broadcast clock event
cpuidle: CPUIDLE_FLAG_CHECK_BM is omap3_idle specific
cpuidle: CPUIDLE_FLAG_TLB_FLUSHED is specific to intel_idle
cpuidle: delete unused CPUIDLE_FLAG_SHALLOW, BALANCED, DEEP definitions
SH, cpuidle: delete use of NOP CPUIDLE_FLAGS_SHALLOW
cpuidle: delete NOP CPUIDLE_FLAG_POLL
ACPI: processor_idle: delete use of NOP CPUIDLE_FLAGs
cpuidle: Rename X86 specific idle poll state[0] from C0 to POLL
ACPI, intel_idle: Cleanup idle= internal variables
cpuidle: Make cpuidle_enable_device() call poll_idle_init()
intel_idle: update Sandy Bridge core C-state residency targets
* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin:
fs: fix do_last error case when need_reval_dot
nfs: add missing rcu-walk check
fs: hlist UP debug fixup
fs: fix dropping of rcu-walk from force_reval_path
fs: force_reval_path drop rcu-walk before d_invalidate
fs: small rcu-walk documentation fixes
Fixed up trivial conflicts in Documentation/filesystems/porting
* 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/p2m: Fix module linking error.
xen p2m: clear the old pte when adding a page to m2p_override
xen gntdev: use gnttab_map_refs and gnttab_unmap_refs
xen: introduce gnttab_map_refs and gnttab_unmap_refs
xen p2m: transparently change the p2m mappings in the m2p override
xen/gntdev: Fix circular locking dependency
xen/gntdev: stop using "token" argument
xen: gntdev: move use of GNTMAP_contains_pte next to the map_op
xen: add m2p override mechanism
xen: move p2m handling to separate file
xen/gntdev: add VM_PFNMAP to vma
xen/gntdev: allow usermode to map granted pages
xen: define gnttab_set_map_op/unmap_op
Fix up trivial conflict in drivers/xen/Kconfig
Po-Yu Chuang <ratbert.chuang@gmail.com> noticed that hlist_bl_set_first could
crash on a UP system when LIST_BL_LOCKMASK is 0, because
LIST_BL_BUG_ON(!((unsigned long)h->first & LIST_BL_LOCKMASK));
always evaulates to true.
Fix the expression, and also avoid a dependency between bit spinlock
implementation and list bl code (list code shouldn't know anything
except that bit 0 is set when adding and removing elements). Eventually
if a good use case comes up, we might use this list to store 1 or more
arbitrary bits of data, so it really shouldn't be tied to locking either,
but for now they are helpful for debugging.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
In the current implementation mem_cgroup_end_migration() decides whether
the page migration has succeeded or not by checking "oldpage->mapping".
But if we are tring to migrate a shmem swapcache, the page->mapping of it
is NULL from the begining, so the check would be invalid. As a result,
mem_cgroup_end_migration() assumes the migration has succeeded even if
it's not, so "newpage" would be freed while it's not uncharged.
This patch fixes it by passing mem_cgroup_end_migration() the result of
the page migration.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce a new bit spin lock, PCG_MOVE_LOCK, to synchronize the page
accounting and migration code. This reworks the locking scheme of
_update_stat() and _move_account() by adding new lock bit PCG_MOVE_LOCK,
which is always taken under IRQ disable.
1. If pages are being migrated from a memcg, then updates to that
memcg page statistics are protected by grabbing PCG_MOVE_LOCK using
move_lock_page_cgroup(). In an upcoming commit, memcg dirty page
accounting will be updating memcg page accounting (specifically: num
writeback pages) from IRQ context (softirq). Avoid a deadlocking
nested spin lock attempt by disabling irq on the local processor when
grabbing the PCG_MOVE_LOCK.
2. lock for update_page_stat is used only for avoiding race with
move_account(). So, IRQ awareness of lock_page_cgroup() itself is not
a problem. The problem is between mem_cgroup_update_page_stat() and
mem_cgroup_move_account_page().
Trade-off:
* Changing lock_page_cgroup() to always disable IRQ (or
local_bh) has some impacts on performance and I think
it's bad to disable IRQ when it's not necessary.
* adding a new lock makes move_account() slower. Score is
here.
Performance Impact: moving a 8G anon process.
Before:
real 0m0.792s
user 0m0.000s
sys 0m0.780s
After:
real 0m0.854s
user 0m0.000s
sys 0m0.842s
This score is bad but planned patches for optimization can reduce
this impact.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrea Righi <arighi@develer.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
