Acceleration in SRCU happens on enqueue time for each new callback. This
operation is expected not to fail and therefore any similar attempt
from other places shouldn't find any remaining callbacks to accelerate.
Moreover accelerations performed beyond enqueue time are error prone
because rcu_seq_snap() then may return the snapshot for a new grace
period that is not going to be started.
Remove these dangerous and needless accelerations and introduce instead
assertions reporting leaking unaccelerated callbacks beyond enqueue
time.
Co-developed-by: Yong He <alexyonghe@tencent.com>
Signed-off-by: Yong He <alexyonghe@tencent.com>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Reviewed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
SRCU callbacks acceleration might fail if the preceding callbacks
advance also fails. This can happen when the following steps are met:
1) The RCU_WAIT_TAIL segment has callbacks (say for gp_num 8) and the
RCU_NEXT_READY_TAIL also has callbacks (say for gp_num 12).
2) The grace period for RCU_WAIT_TAIL is observed as started but not yet
completed so rcu_seq_current() returns 4 + SRCU_STATE_SCAN1 = 5.
3) This value is passed to rcu_segcblist_advance() which can't move
any segment forward and fails.
4) srcu_gp_start_if_needed() still proceeds with callback acceleration.
But then the call to rcu_seq_snap() observes the grace period for the
RCU_WAIT_TAIL segment (gp_num 8) as completed and the subsequent one
for the RCU_NEXT_READY_TAIL segment as started
(ie: 8 + SRCU_STATE_SCAN1 = 9) so it returns a snapshot of the
next grace period, which is 16.
5) The value of 16 is passed to rcu_segcblist_accelerate() but the
freshly enqueued callback in RCU_NEXT_TAIL can't move to
RCU_NEXT_READY_TAIL which already has callbacks for a previous grace
period (gp_num = 12). So acceleration fails.
6) Note in all these steps, srcu_invoke_callbacks() hadn't had a chance
to run srcu_invoke_callbacks().
Then some very bad outcome may happen if the following happens:
7) Some other CPU races and starts the grace period number 16 before the
CPU handling previous steps had a chance. Therefore srcu_gp_start()
isn't called on the latter sdp to fix the acceleration leak from
previous steps with a new pair of call to advance/accelerate.
8) The grace period 16 completes and srcu_invoke_callbacks() is finally
called. All the callbacks from previous grace periods (8 and 12) are
correctly advanced and executed but callbacks in RCU_NEXT_READY_TAIL
still remain. Then rcu_segcblist_accelerate() is called with a
snaphot of 20.
9) Since nothing started the grace period number 20, callbacks stay
unhandled.
This has been reported in real load:
[3144162.608392] INFO: task kworker/136:12:252684 blocked for more
than 122 seconds.
[3144162.615986] Tainted: G O K 5.4.203-1-tlinux4-0011.1 #1
[3144162.623053] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[3144162.631162] kworker/136:12 D 0 252684 2 0x90004000
[3144162.631189] Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm]
[3144162.631192] Call Trace:
[3144162.631202] __schedule+0x2ee/0x660
[3144162.631206] schedule+0x33/0xa0
[3144162.631209] schedule_timeout+0x1c4/0x340
[3144162.631214] ? update_load_avg+0x82/0x660
[3144162.631217] ? raw_spin_rq_lock_nested+0x1f/0x30
[3144162.631218] wait_for_completion+0x119/0x180
[3144162.631220] ? wake_up_q+0x80/0x80
[3144162.631224] __synchronize_srcu.part.19+0x81/0xb0
[3144162.631226] ? __bpf_trace_rcu_utilization+0x10/0x10
[3144162.631227] synchronize_srcu+0x5f/0xc0
[3144162.631236] irqfd_shutdown+0x3c/0xb0 [kvm]
[3144162.631239] ? __schedule+0x2f6/0x660
[3144162.631243] process_one_work+0x19a/0x3a0
[3144162.631244] worker_thread+0x37/0x3a0
[3144162.631247] kthread+0x117/0x140
[3144162.631247] ? process_one_work+0x3a0/0x3a0
[3144162.631248] ? __kthread_cancel_work+0x40/0x40
[3144162.631250] ret_from_fork+0x1f/0x30
Fix this with taking the snapshot for acceleration _before_ the read
of the current grace period number.
The only side effect of this solution is that callbacks advancing happen
then _after_ the full barrier in rcu_seq_snap(). This is not a problem
because that barrier only cares about:
1) Ordering accesses of the update side before call_srcu() so they don't
bleed.
2) See all the accesses prior to the grace period of the current gp_num
The only things callbacks advancing need to be ordered against are
carried by snp locking.
Reported-by: Yong He <alexyonghe@tencent.com>
Co-developed-by:: Yong He <alexyonghe@tencent.com>
Signed-off-by: Yong He <alexyonghe@tencent.com>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Link: http://lore.kernel.org/CANZk6aR+CqZaqmMWrC2eRRPY12qAZnDZLwLnHZbNi=xXMB401g@mail.gmail.com
Fixes: da915ad5cf ("srcu: Parallelize callback handling")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
The value of a bitwise expression 1 << (cpu - sdp->mynode->grplo)
is subject to overflow due to a failure to cast operands to a larger
data type before performing the bitwise operation.
The maximum result of this subtraction is defined by the RCU_FANOUT_LEAF
Kconfig option, which on 64-bit systems defaults to 16 (resulting in a
maximum shift of 15), but which can be set up as high as 64 (resulting
in a maximum shift of 63). A value of 31 can result in sign extension,
resulting in 0xffffffff80000000 instead of the desired 0x80000000.
A value of 32 or greater triggers undefined behavior per the C standard.
This bug has not been known to cause issues because almost all kernels
take the default CONFIG_RCU_FANOUT_LEAF=16. Furthermore, as long as a
given compiler gives a deterministic non-zero result for 1<<N for N>=32,
the code correctly invokes all SRCU callbacks, albeit wasting CPU time
along the way.
This commit therefore substitutes the correct 1UL for the buggy 1.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
When a structure containing an RCU callback rhp is (incorrectly) freed
and reallocated after rhp is passed to call_rcu(), it is not unusual for
rhp->func to be set to NULL. This defeats the debugging prints used by
__call_rcu_common() in kernels built with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y,
which expect to identify the offending code using the identity of this
function.
And in kernels build without CONFIG_DEBUG_OBJECTS_RCU_HEAD=y, things
are even worse, as can be seen from this splat:
Unable to handle kernel NULL pointer dereference at virtual address 0
... ...
PC is at 0x0
LR is at rcu_do_batch+0x1c0/0x3b8
... ...
(rcu_do_batch) from (rcu_core+0x1d4/0x284)
(rcu_core) from (__do_softirq+0x24c/0x344)
(__do_softirq) from (__irq_exit_rcu+0x64/0x108)
(__irq_exit_rcu) from (irq_exit+0x8/0x10)
(irq_exit) from (__handle_domain_irq+0x74/0x9c)
(__handle_domain_irq) from (gic_handle_irq+0x8c/0x98)
(gic_handle_irq) from (__irq_svc+0x5c/0x94)
(__irq_svc) from (arch_cpu_idle+0x20/0x3c)
(arch_cpu_idle) from (default_idle_call+0x4c/0x78)
(default_idle_call) from (do_idle+0xf8/0x150)
(do_idle) from (cpu_startup_entry+0x18/0x20)
(cpu_startup_entry) from (0xc01530)
This commit therefore adds calls to mem_dump_obj(rhp) to output some
information, for example:
slab kmalloc-256 start ffff410c45019900 pointer offset 0 size 256
This provides the rough size of the memory block and the offset of the
rcu_head structure, which as least provides at least a few clues to help
locate the problem. If the problem is reproducible, additional slab
debugging can be enabled, for example, CONFIG_DEBUG_SLAB=y, which can
provide significantly more information.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
The current error handling in init_srcu_struct_fields() is a bit
inconsistent. If init_srcu_struct_nodes() fails, the function either
returns -ENOMEM or 0 depending on whether ssp->sda_is_static is true or
false. This can make init_srcu_struct_fields() return 0 even if memory
allocation failed!
Simplify the error handling by always returning -ENOMEM if either
init_srcu_struct_nodes() or the per-CPU allocation fails. This makes the
control flow easier to follow and avoids the inconsistent return values.
Add goto labels to avoid duplicating the error cleanup code.
Link: https://lore.kernel.org/r/20230404003508.GA254019@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
There is an smp_mb() named "E" in srcu_flip() immediately before the
increment (flip) of the srcu_struct structure's ->srcu_idx.
The purpose of E is to order the preceding scan's read of lock counters
against the flipping of the ->srcu_idx, in order to prevent new readers
from continuing to use the old ->srcu_idx value, which might needlessly
extend the grace period.
However, this ordering is already enforced because of the control
dependency between the preceding scan and the ->srcu_idx flip.
This control dependency exists because atomic_long_read() is used
to scan the counts, because WRITE_ONCE() is used to flip ->srcu_idx,
and because ->srcu_idx is not flipped until the ->srcu_lock_count[] and
->srcu_unlock_count[] counts match. And such a match cannot happen when
there is an in-flight reader that started before the flip (observation
courtesy Mathieu Desnoyers).
The litmus test below (courtesy of Frederic Weisbecker, with changes
for ctrldep by Boqun and Joel) shows this:
C srcu
(*
* bad condition: P0's first scan (SCAN1) saw P1's idx=0 LOCK count inc, though P1 saw flip.
*
* So basically, the ->po ordering on both P0 and P1 is enforced via ->ppo
* (control deps) on both sides, and both P0 and P1 are interconnected by ->rf
* relations. Combining the ->ppo with ->rf, a cycle is impossible.
*)
{}
// updater
P0(int *IDX, int *LOCK0, int *UNLOCK0, int *LOCK1, int *UNLOCK1)
{
int lock1;
int unlock1;
int lock0;
int unlock0;
// SCAN1
unlock1 = READ_ONCE(*UNLOCK1);
smp_mb(); // A
lock1 = READ_ONCE(*LOCK1);
// FLIP
if (lock1 == unlock1) { // Control dep
smp_mb(); // E // Remove E and still passes.
WRITE_ONCE(*IDX, 1);
smp_mb(); // D
// SCAN2
unlock0 = READ_ONCE(*UNLOCK0);
smp_mb(); // A
lock0 = READ_ONCE(*LOCK0);
}
}
// reader
P1(int *IDX, int *LOCK0, int *UNLOCK0, int *LOCK1, int *UNLOCK1)
{
int tmp;
int idx1;
int idx2;
// 1st reader
idx1 = READ_ONCE(*IDX);
if (idx1 == 0) { // Control dep
tmp = READ_ONCE(*LOCK0);
WRITE_ONCE(*LOCK0, tmp + 1);
smp_mb(); /* B and C */
tmp = READ_ONCE(*UNLOCK0);
WRITE_ONCE(*UNLOCK0, tmp + 1);
} else {
tmp = READ_ONCE(*LOCK1);
WRITE_ONCE(*LOCK1, tmp + 1);
smp_mb(); /* B and C */
tmp = READ_ONCE(*UNLOCK1);
WRITE_ONCE(*UNLOCK1, tmp + 1);
}
}
exists (0:lock1=1 /\ 1:idx1=1)
More complicated litmus tests with multiple SRCU readers also show that
memory barrier E is not needed.
This commit therefore clarifies the comment on memory barrier E.
Why not also remove that redundant smp_mb()?
Because control dependencies are quite fragile due to their not being
recognized by most compilers and tools. Control dependencies therefore
exact an ongoing maintenance burden, and such a burden cannot be justified
in this slowpath. Therefore, that smp_mb() stays until such time as
its overhead becomes a measurable problem in a real workload running on
a real production system, or until such time as compilers start paying
attention to this sort of control dependency.
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Co-developed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
This commit creates an srcu_usage pointer named "sup" as a shorter
synonym for the "ssp->srcu_sup" that was bloating several lines of code.
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit creates an srcu_usage pointer named "sup" as a shorter
synonym for the "ssp->srcu_sup" that was bloating several lines of code.
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit creates an srcu_usage pointer named "sup" as a shorter
synonym for the "ssp->srcu_sup" that was bloating several lines of code.
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit creates an srcu_usage pointer named "sup" as a shorter
synonym for the "ssp->srcu_sup" that was bloating several lines of code.
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If a given statically allocated in-module srcu_struct structure was ever
used for updates, srcu_module_going() will invoke cleanup_srcu_struct()
at module-exit time. This will check for the error case of SRCU readers
persisting past module-exit time. On the other hand, if this srcu_struct
structure never went through a grace period, srcu_module_going() only
invokes free_percpu(), which would result in strange failures if SRCU
readers persisted past module-exit time.
This commit therefore adds a srcu_readers_active() check to
srcu_module_going(), splatting if readers have persisted and refraining
from invoking free_percpu() in that case. Better to leak memory than
to suffer silent memory corruption!
[ paulmck: Apply Zhang, Qiang1 feedback on memory leak. ]
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->reschedule_jiffies, ->reschedule_count, and
->work fields from the srcu_struct structure to the srcu_usage structure
to reduce the size of the former in order to improve cache locality.
However, this means that the container_of() calls cannot get a pointer
to the srcu_struct because they are no longer in the srcu_struct.
This issue is addressed by adding a ->srcu_ssp field in the srcu_usage
structure that references the corresponding srcu_struct structure.
And given the presence of the sup pointer to the srcu_usage structure,
replace some ssp->srcu_usage-> instances with sup->.
[ paulmck Apply feedback from kernel test robot. ]
Link: https://lore.kernel.org/oe-kbuild-all/202303191400.iO5BOqka-lkp@intel.com/
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_barrier_seq, ->srcu_barrier_mutex,
->srcu_barrier_completion, and ->srcu_barrier_cpu_cnt fields from the
srcu_struct structure to the srcu_usage structure to reduce the size of
the former in order to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->sda_is_static field from the srcu_struct structure
to the srcu_usage structure to reduce the size of the former in order
to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_size_jiffies, ->srcu_n_lock_retries,
and ->srcu_n_exp_nodelay fields from the srcu_struct structure to the
srcu_usage structure to reduce the size of the former in order to improve
cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_gp_seq, ->srcu_gp_seq_needed,
->srcu_gp_seq_needed_exp, ->srcu_gp_start, and ->srcu_last_gp_end fields
from the srcu_struct structure to the srcu_usage structure to reduce
the size of the former in order to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_gp_mutex field from the srcu_struct structure
to the srcu_usage structure to reduce the size of the former in order
to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->lock field from the srcu_struct structure to
the srcu_usage structure to reduce the size of the former in order to
improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, both __init_srcu_struct() in CONFIG_DEBUG_LOCK_ALLOC=y kernels
and init_srcu_struct() in CONFIG_DEBUG_LOCK_ALLOC=n kernel initialize
the srcu_struct structure's ->lock before the srcu_usage structure has
been allocated. This of course prevents the ->lock from being moved
to the srcu_usage structure, so this commit moves the initialization
into the init_srcu_struct_fields() after the srcu_usage structure has
been allocated.
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_cb_mutex field from the srcu_struct structure
to the srcu_usage structure to reduce the size of the former in order
to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_size_state field from the srcu_struct
structure to the srcu_usage structure to reduce the size of the former
in order to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->level[] array from the srcu_struct structure to
the srcu_usage structure to reduce the size of the former in order to
improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current srcu_struct structure is on the order of 200 bytes in size
(depending on architecture and .config), which is much better than the
old-style 26K bytes, but still all too inconvenient when one is trying
to achieve good cache locality on a fastpath involving SRCU readers.
However, only a few fields in srcu_struct are used by SRCU readers.
The remaining fields could be offloaded to a new srcu_update
structure, thus shrinking the srcu_struct structure down to a few
tens of bytes. This commit begins this noble quest, a quest that is
complicated by open-coded initialization of the srcu_struct within the
srcu_notifier_head structure. This complication is addressed by updating
the srcu_notifier_head structure's open coding, given that there does
not appear to be a straightforward way of abstracting that initialization.
This commit moves only the ->node pointer to srcu_update. Later commits
will move additional fields.
[ paulmck: Fold in qiang1.zhang@intel.com's memory-leak fix. ]
Link: https://lore.kernel.org/all/20230320055751.4120251-1-qiang1.zhang@intel.com/
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Further shrinking the srcu_struct structure is eased by requiring
that in-module srcu_struct structures rely more heavily on static
initialization. In particular, this preserves the property that
a module-load-time srcu_struct initialization can fail only due
to memory-allocation failure of the per-CPU srcu_data structures.
It might also slightly improve robustness by keeping the number of memory
allocations that must succeed down percpu_alloc() call.
This is in preparation for splitting an srcu_usage structure out
of the srcu_struct structure.
[ paulmck: Fold in qiang1.zhang@intel.com feedback. ]
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
