Pull ARM driver updates from Arnd Bergmann:
"These are the usual updates for SoC specific device drivers and
related subsystems that don't have their own top-level maintainers:
- ARM SCMI/SCPI updates to allow pluggable transport layers
- TEE subsystem cleanups
- A new driver for the Amlogic secure power domain controller
- Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
and TI OMAP2+ sysc drivers.
- Qualcomm SoC driver updates, including a new library module for
"protection domain" notifications
- Lots of smaller bugfixes and cleanups in other drivers"
* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
soc: fsl: qe: fix sparse warnings for ucc_slow.c
soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
soc: fsl: qe: fix sparse warnings for ucc_fast.c
soc: fsl: qe: fix sparse warnings for qe_ic.c
soc: fsl: qe: fix sparse warnings for ucc.c
soc: fsl: qe: fix sparse warning for qe_common.c
soc: fsl: qe: fix sparse warnings for qe.c
soc: qcom: Fix QCOM_APR dependencies
soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
firmware: imx: add COMPILE_TEST for IMX_SCU driver
soc: imx: gpc: fix power up sequencing
soc: imx: increase build coverage for imx8m soc driver
soc: qcom: apr: Add avs/audio tracking functionality
dt-bindings: soc: qcom: apr: Add protection domain bindings
soc: qcom: Introduce Protection Domain Restart helpers
devicetree: bindings: firmware: add ipq806x to qcom_scm
memory: tegra: Correct debugfs clk rate-range on Tegra124
memory: tegra: Correct debugfs clk rate-range on Tegra30
memory: tegra: Correct debugfs clk rate-range on Tegra20
...
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 6b9acd9355 ("memory: tegra: Refashion EMC debugfs interface on Tegra124")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 8cee32b400 ("memory: tegra: Implement EMC debugfs interface on Tegra30")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Correctly set clk rate-range if number of available timings is zero.
This fixes noisy "invalid range [4294967295, 0]" error messages during
boot.
Fixes: 8209eefa3d ("memory: tegra: Implement EMC debugfs interface on Tegra20")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
mvebu drivers for 5.6 (part 1)
- Various cleanup on the following drivers:
- Turris Mox rWTM firmware
- Moxtet bus
- Armada 37xx rWTM mailbox
- Marvell EBU Device Bus
* tag 'mvebu-drivers-5.6-1' of git://git.infradead.org/linux-mvebu:
mailbox: armada-37xx-rwtm: convert to devm_platform_ioremap_resource
memory: mvebu-devbus: convert to devm_platform_ioremap_resource
bus: moxtet: declare moxtet_bus_type as static
firmware: turris-mox-rwtm: small white space cleanup
Link: https://lore.kernel.org/r/877e1x3nxc.fsf@FE-laptop
Signed-off-by: Olof Johansson <olof@lixom.net>
memory: tegra: Changes for v5.6-rc1
This adds a couple of fixes for the Tegra30 EMC frequency scaling code
and adds support for EMC frequency scaling on Tegra186 and later.
* tag 'tegra-for-5.6-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
memory: tegra: Correct reset value of xusb_hostr
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
memory: tegra: Add system sleep support
memory: tegra: Extract memory client SID programming
memory: tegra: Add per-SoC data for Tegra186
memory: tegra: Rename tegra_mc to tegra186_mc on Tegra186
memory: tegra: Implement EMC debugfs interface on Tegra30
memory: tegra: Implement EMC debugfs interface on Tegra20
memory: tegra: Refashion EMC debugfs interface on Tegra124
Link: https://lore.kernel.org/r/20200111003553.2411874-3-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The code waits for auto calibration to be finished and not to be disabled.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously there was a problem where a late handshake handling caused
a memory corruption, this problem was resolved by issuing calibration
command right after changing the timing, but looks like the solution
wasn't entirely correct since calibration interval could be disabled as
well. Now programming sequence is completed immediately after receiving
handshake from CaR, without potentially long delays and in accordance to
the TRM's programming guide.
Secondly, the TRM's programming guide suggests to flush EMC writes by
reading any *MC* register before doing CaR changes. This is also addressed
now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current code doesn't prevent race conditions of suspend/resume vs CCF.
Let's take exclusive control over the EMC clock during suspend in a way
that is free from race conditions.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to Tegra X1 (Tegra210) TRM, the reset value of xusb_hostr
field (bit [7:0]) should be 0x7a. So this patch simply corrects it.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory and external memory controllers on Tegra194 are very similar
to their predecessors from Tegra186. Add the necessary SoC-specific data
to support the newer versions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The memory client tables can be fairly large and they can easily be
omitted if support for the corresponding SoC is not enabled.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a Tegra186 (and later) EMC driver that reads the EMC DVFS tables
from BPMP and uses the EMC clock to change the external memory clock.
This currently only provides a debugfs interface to show the available
frequencies and set lower and upper limits of the allowed range. This
can be used for testing the various frequencies. The goal is to
eventually integrate this with the interconnect framework so that the
EMC frequency can be scaled based on demand from memory clients.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add system suspend/resume support for the memory controller found on
Tegra186 and later. This is required so that the SID registers can be
reprogrammed after their content was lost during system sleep.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move programming of the memory client to SID mapping into a separate
function so that it can be reused from multiple call sites.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of hard-coding the memory client table, use per-SoC data in
preparation for adding support for other SoCs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
A common debugfs interface is already available on Tegra20, Tegra124,
Tegra186 and Tegra194. Implement the same interface on Tegra30 to enable
testing of the EMC frequency scaling code using a unified interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
A common debugfs interface is already available on Tegra124, Tegra186
and Tegra194. Implement the same interface on Tegra20 to enable testing
of the EMC frequency scaling code using a unified interface.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The current debugfs interface is only partially useful. While it allows
listing supported frequencies and testing individual clock rates, it is
limited in that it can't be used to restrict the range of frequencies
that the driver is allowed to set. This is something we may want to use
to test adaptive scaling once that's implemented.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
memory: tegra: Fixes for v5.5-rc1
This contains a fix for a kernel panic that can occur on suspend if EMC
timings are not available in device tree.
* tag 'tegra-for-5.5-memory-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra30-emc: Fix panic on suspend
Link: https://lore.kernel.org/r/20191204130753.3614278-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
