Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Rename and export helpers that get write access to a mount. They
are used in overlayfs to get write access to the upper mount.
- Print the pretty name of the root device on boot failure. This
helps in scenarios where we would usually only print
"unknown-block(1,2)".
- Add an internal SB_I_NOUMASK flag. This is another part in the
endless POSIX ACL saga in a way.
When POSIX ACLs are enabled via SB_POSIXACL the vfs cannot strip
the umask because if the relevant inode has POSIX ACLs set it might
take the umask from there. But if the inode doesn't have any POSIX
ACLs set then we apply the umask in the filesytem itself. So we end
up with:
(1) no SB_POSIXACL -> strip umask in vfs
(2) SB_POSIXACL -> strip umask in filesystem
The umask semantics associated with SB_POSIXACL allowed filesystems
that don't even support POSIX ACLs at all to raise SB_POSIXACL
purely to avoid umask stripping. That specifically means NFS v4 and
Overlayfs. NFS v4 does it because it delegates this to the server
and Overlayfs because it needs to delegate umask stripping to the
upper filesystem, i.e., the filesystem used as the writable layer.
This went so far that SB_POSIXACL is raised eve on kernels that
don't even have POSIX ACL support at all.
Stop this blatant abuse and add SB_I_NOUMASK which is an internal
superblock flag that filesystems can raise to opt out of umask
handling. That should really only be the two mentioned above. It's
not that we want any filesystems to do this. Ideally we have all
umask handling always in the vfs.
- Make overlayfs use SB_I_NOUMASK too.
- Now that we have SB_I_NOUMASK, stop checking for SB_POSIXACL in
IS_POSIXACL() if the kernel doesn't have support for it. This is a
very old patch but it's only possible to do this now with the wider
cleanup that was done.
- Follow-up work on fake path handling from last cycle. Citing mostly
from Amir:
When overlayfs was first merged, overlayfs files of regular files
and directories, the ones that are installed in file table, had a
"fake" path, namely, f_path is the overlayfs path and f_inode is
the "real" inode on the underlying filesystem.
In v6.5, we took another small step by introducing of the
backing_file container and the file_real_path() helper. This change
allowed vfs and filesystem code to get the "real" path of an
overlayfs backing file. With this change, we were able to make
fsnotify work correctly and report events on the "real" filesystem
objects that were accessed via overlayfs.
This method works fine, but it still leaves the vfs vulnerable to
new code that is not aware of files with fake path. A recent
example is commit db1d1e8b98 ("IMA: use vfs_getattr_nosec to get
the i_version"). This commit uses direct referencing to f_path in
IMA code that otherwise uses file_inode() and file_dentry() to
reference the filesystem objects that it is measuring.
This contains work to switch things around: instead of having
filesystem code opt-in to get the "real" path, have generic code
opt-in for the "fake" path in the few places that it is needed.
Is it far more likely that new filesystems code that does not use
the file_dentry() and file_real_path() helpers will end up causing
crashes or averting LSM/audit rules if we keep the "fake" path
exposed by default.
This change already makes file_dentry() moot, but for now we did
not change this helper just added a WARN_ON() in ovl_d_real() to
catch if we have made any wrong assumptions.
After the dust settles on this change, we can make file_dentry() a
plain accessor and we can drop the inode argument to ->d_real().
- Switch struct file to SLAB_TYPESAFE_BY_RCU. This looks like a small
change but it really isn't and I would like to see everyone on
their tippie toes for any possible bugs from this work.
Essentially we've been doing most of what SLAB_TYPESAFE_BY_RCU for
files since a very long time because of the nasty interactions
between the SCM_RIGHTS file descriptor garbage collection. So
extending it makes a lot of sense but it is a subtle change. There
are almost no places that fiddle with file rcu semantics directly
and the ones that did mess around with struct file internal under
rcu have been made to stop doing that because it really was always
dodgy.
I forgot to put in the link tag for this change and the discussion
in the commit so adding it into the merge message:
https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Cleanups:
- Various smaller pipe cleanups including the removal of a spin lock
that was only used to protect against writes without pipe_lock()
from O_NOTIFICATION_PIPE aka watch queues. As that was never
implemented remove the additional locking from pipe_write().
- Annotate struct watch_filter with the new __counted_by attribute.
- Clarify do_unlinkat() cleanup so that it doesn't look like an extra
iput() is done that would cause issues.
- Simplify file cleanup when the file has never been opened.
- Use module helper instead of open-coding it.
- Predict error unlikely for stale retry.
- Use WRITE_ONCE() for mount expiry field instead of just commenting
that one hopes the compiler doesn't get smart.
Fixes:
- Fix readahead on block devices.
- Fix writeback when layztime is enabled and inodes whose timestamp
is the only thing that changed reside on wb->b_dirty_time. This
caused excessively large zombie memory cgroup when lazytime was
enabled as such inodes weren't handled fast enough.
- Convert BUG_ON() to WARN_ON_ONCE() in open_last_lookups()"
* tag 'vfs-6.7.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
file, i915: fix file reference for mmap_singleton()
vfs: Convert BUG_ON to WARN_ON_ONCE in open_last_lookups
writeback, cgroup: switch inodes with dirty timestamps to release dying cgwbs
chardev: Simplify usage of try_module_get()
ovl: rely on SB_I_NOUMASK
fs: fix umask on NFS with CONFIG_FS_POSIX_ACL=n
fs: store real path instead of fake path in backing file f_path
fs: create helper file_user_path() for user displayed mapped file path
fs: get mnt_writers count for an open backing file's real path
vfs: stop counting on gcc not messing with mnt_expiry_mark if not asked
vfs: predict the error in retry_estale as unlikely
backing file: free directly
vfs: fix readahead(2) on block devices
io_uring: use files_lookup_fd_locked()
file: convert to SLAB_TYPESAFE_BY_RCU
vfs: shave work on failed file open
fs: simplify misleading code to remove ambiguity regarding ihold()/iput()
watch_queue: Annotate struct watch_filter with __counted_by
fs/pipe: use spinlock in pipe_read() only if there is a watch_queue
fs/pipe: remove unnecessary spinlock from pipe_write()
...
Overlayfs uses backing files with "fake" overlayfs f_path and "real"
underlying f_inode, in order to use underlying inode aops for mapped
files and to display the overlayfs path in /proc/<pid>/maps.
In preparation for storing the overlayfs "fake" path instead of the
underlying "real" path in struct backing_file, define a noop helper
file_user_path() that returns f_path for now.
Use the new helper in procfs and kernel logs whenever a path of a
mapped file is displayed to users.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231009153712.1566422-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
All architectures should use a long aligned address passed to set_bit().
User processes can pass either a 32-bit or 64-bit sized value to be
updated when tracing is enabled when on a 64-bit kernel. Both cases are
ensured to be naturally aligned, however, that is not enough. The
address must be long aligned without affecting checks on the value
within the user process which require different adjustments for the bit
for little and big endian CPUs.
Add a compat flag to user_event_enabler that indicates when a 32-bit
value is being used on a 64-bit kernel. Long align addresses and correct
the bit to be used by set_bit() to account for this alignment. Ensure
compat flags are copied during forks and used during deletion clears.
Link: https://lore.kernel.org/linux-trace-kernel/20230925230829.341-2-beaub@linux.microsoft.com
Link: https://lore.kernel.org/linux-trace-kernel/20230914131102.179100-1-cleger@rivosinc.com/
Cc: stable@vger.kernel.org
Fixes: 7235759084 ("tracing/user_events: Use remote writes for event enablement")
Reported-by: Clément Léger <cleger@rivosinc.com>
Suggested-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When kernel is compiled without preemption, the eval_map_work_func()
(which calls trace_event_eval_update()) will not be preempted up to its
complete execution. This can actually cause a problem since if another
CPU call stop_machine(), the call will have to wait for the
eval_map_work_func() function to finish executing in the workqueue
before being able to be scheduled. This problem was observe on a SMP
system at boot time, when the CPU calling the initcalls executed
clocksource_done_booting() which in the end calls stop_machine(). We
observed a 1 second delay because one CPU was executing
eval_map_work_func() and was not preempted by the stop_machine() task.
Adding a call to cond_resched() in trace_event_eval_update() allows
other tasks to be executed and thus continue working asynchronously
like before without blocking any pending task at boot time.
Link: https://lore.kernel.org/linux-trace-kernel/20230929191637.416931-1-cleger@rivosinc.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It was discovered that the ring buffer polling was incorrectly stating
that read would not block, but that's because polling did not take into
account that reads will block if the "buffer-percent" was set. Instead,
the ring buffer polling would say reads would not block if there was any
data in the ring buffer. This was incorrect behavior from a user space
point of view. This was fixed by commit 42fb0a1e84 by having the polling
code check if the ring buffer had more data than what the user specified
"buffer percent" had.
The problem now is that the polling code did not register itself to the
writer that it wanted to wait for a specific "full" value of the ring
buffer. The result was that the writer would wake the polling waiter
whenever there was a new event. The polling waiter would then wake up, see
that there's not enough data in the ring buffer to notify user space and
then go back to sleep. The next event would wake it up again.
Before the polling fix was added, the code would wake up around 100 times
for a hackbench 30 benchmark. After the "fix", due to the constant waking
of the writer, it would wake up over 11,0000 times! It would never leave
the kernel, so the user space behavior was still "correct", but this
definitely is not the desired effect.
To fix this, have the polling code add what it's waiting for to the
"shortest_full" variable, to tell the writer not to wake it up if the
buffer is not as full as it expects to be.
Note, after this fix, it appears that the waiter is now woken up around 2x
the times it was before (~200). This is a tremendous improvement from the
11,000 times, but I will need to spend some time to see why polling is
more aggressive in its wakeups than the read blocking code.
Link: https://lore.kernel.org/linux-trace-kernel/20230929180113.01c2cae3@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 42fb0a1e84 ("tracing/ring-buffer: Have polling block on watermark")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Tested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull tracing fixes from Steven Rostedt:
- Fix the "bytes" output of the per_cpu stat file
The tracefs/per_cpu/cpu*/stats "bytes" was giving bogus values as the
accounting was not accurate. It is suppose to show how many used
bytes are still in the ring buffer, but even when the ring buffer was
empty it would still show there were bytes used.
- Fix a bug in eventfs where reading a dynamic event directory (open)
and then creating a dynamic event that goes into that diretory screws
up the accounting.
On close, the newly created event dentry will get a "dput" without
ever having a "dget" done for it. The fix is to allocate an array on
dir open to save what dentries were actually "dget" on, and what ones
to "dput" on close.
* tag 'trace-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Remember what dentries were created on dir open
ring-buffer: Fix bytes info in per_cpu buffer stats
The 'bytes' info in file 'per_cpu/cpu<X>/stats' means the number of
bytes in cpu buffer that have not been consumed. However, currently
after consuming data by reading file 'trace_pipe', the 'bytes' info
was not changed as expected.
# cat per_cpu/cpu0/stats
entries: 0
overrun: 0
commit overrun: 0
bytes: 568 <--- 'bytes' is problematical !!!
oldest event ts: 8651.371479
now ts: 8653.912224
dropped events: 0
read events: 8
The root cause is incorrect stat on cpu_buffer->read_bytes. To fix it:
1. When stat 'read_bytes', account consumed event in rb_advance_reader();
2. When stat 'entries_bytes', exclude the discarded padding event which
is smaller than minimum size because it is invisible to reader. Then
use rb_page_commit() instead of BUF_PAGE_SIZE at where accounting for
page-based read/remove/overrun.
Also correct the comments of ring_buffer_bytes_cpu() in this patch.
Link: https://lore.kernel.org/linux-trace-kernel/20230921125425.1708423-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: c64e148a3b ("trace: Add ring buffer stats to measure rate of events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull tracing fixes from Steven Rostedt:
- Add missing LOCKDOWN checks for eventfs callers
When LOCKDOWN is active for tracing, it causes inconsistent state
when some functions succeed and others fail.
- Use dput() to free the top level eventfs descriptor
There was a race between accesses and freeing it.
- Fix a long standing bug that eventfs exposed due to changing timings
by dynamically creating files. That is, If a event file is opened for
an instance, there's nothing preventing the instance from being
removed which will make accessing the files cause use-after-free
bugs.
- Fix a ring buffer race that happens when iterating over the ring
buffer while writers are active. Check to make sure not to read the
event meta data if it's beyond the end of the ring buffer sub buffer.
- Fix the print trigger that disappeared because the test to create it
was looking for the event dir field being filled, but now it has the
"ef" field filled for the eventfs structure.
- Remove the unused "dir" field from the event structure.
- Fix the order of the trace_dynamic_info as it had it backwards for
the offset and len fields for which one was for which endianess.
- Fix NULL pointer dereference with eventfs_remove_rec()
If an allocation fails in one of the eventfs_add_*() functions, the
caller of it in event_subsystem_dir() or event_create_dir() assigns
the result to the structure. But it's assigning the ERR_PTR and not
NULL. This was passed to eventfs_remove_rec() which expects either a
good pointer or a NULL, not ERR_PTR. The fix is to not assign the
ERR_PTR to the structure, but to keep it NULL on error.
- Fix list_for_each_rcu() to use list_for_each_srcu() in
dcache_dir_open_wrapper(). One iteration of the code used RCU but
because it had to call sleepable code, it had to be changed to use
SRCU, but one of the iterations was missed.
- Fix synthetic event print function to use "as_u64" instead of passing
in a pointer to the union. To fix big/little endian issues, the u64
that represented several types was turned into a union to define the
types properly.
* tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Fix the NULL pointer dereference bug in eventfs_remove_rec()
tracefs/eventfs: Use list_for_each_srcu() in dcache_dir_open_wrapper()
tracing/synthetic: Print out u64 values properly
tracing/synthetic: Fix order of struct trace_dynamic_info
selftests/ftrace: Fix dependencies for some of the synthetic event tests
tracing: Remove unused trace_event_file dir field
tracing: Use the new eventfs descriptor for print trigger
ring-buffer: Do not attempt to read past "commit"
tracefs/eventfs: Free top level files on removal
ring-buffer: Avoid softlockup in ring_buffer_resize()
tracing: Have event inject files inc the trace array ref count
tracing: Have option files inc the trace array ref count
tracing: Have current_trace inc the trace array ref count
tracing: Have tracing_max_latency inc the trace array ref count
tracing: Increase trace array ref count on enable and filter files
tracefs/eventfs: Use dput to free the toplevel events directory
tracefs/eventfs: Add missing lockdown checks
tracefs: Add missing lockdown check to tracefs_create_dir()
The check to create the print event "trigger" was using the obsolete "dir"
value of the trace_event_file to determine if it should create the trigger
or not. But that value will now be NULL because it uses the event file
descriptor.
Change it to test the "ef" field of the trace_event_file structure so that
the trace_marker "trigger" file appears again.
Link: https://lkml.kernel.org/r/20230908022001.371815239@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 27152bceea ("eventfs: Move tracing/events to eventfs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When iterating over the ring buffer while the ring buffer is active, the
writer can corrupt the reader. There's barriers to help detect this and
handle it, but that code missed the case where the last event was at the
very end of the page and has only 4 bytes left.
The checks to detect the corruption by the writer to reads needs to see the
length of the event. If the length in the first 4 bytes is zero then the
length is stored in the second 4 bytes. But if the writer is in the process
of updating that code, there's a small window where the length in the first
4 bytes could be zero even though the length is only 4 bytes. That will
cause rb_event_length() to read the next 4 bytes which could happen to be off the
allocated page.
To protect against this, fail immediately if the next event pointer is
less than 8 bytes from the end of the commit (last byte of data), as all
events must be a minimum of 8 bytes anyway.
Link: https://lore.kernel.org/all/20230905141245.26470-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230907122820.0899019c@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reported-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be allocated, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer allocation.
Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
