Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
While the script correctly extracts UTF-8 encoded names from the
MAINTAINERS file, the regular expressions damage my name when parsing
from .yaml files. Fix this by replacing the Latin-1-compatible regular
expressions with the unicode property matcher \p{L}, which matches on
any letter according to the Unicode General Category of letters.
The proposed solution only works if the script uses proper string
encoding from the outset, so instruct Perl to unconditionally open all
files with UTF-8 encoding. This should be safe, as the entire source
tree is either UTF-8 or ASCII encoded anyway. See [1] for a detailed
analysis.
Furthermore, to prevent the \w expression from matching non-ASCII when
checking for whether a name should be escaped with quotes, add the /a
flag to the regular expression. The escaping logic was duplicated in
two places, so it has been factored out into its own function.
The original issue was also identified on the tools mailing list [2].
This should solve the observed side effects there as well.
Link: https://lore.kernel.org/all/dzn6uco4c45oaa3ia4u37uo5mlt33obecv7gghj2l756fr4hdh@mt3cprft3tmq/ [1]
Link: https://lore.kernel.org/tools/20230726-gush-slouching-a5cd41@meerkat/ [2]
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the kernel log is acquired over a serial cable it is not uncommon for
the log to contain carriage return characters, in addition to the expected
line feeds.
When this output is feed into decode_stacktrace.sh, handle_line() fails to
strip the trailing ']' off the module name, which results in find_module()
not being able to find the referred to kernel module. This is reported to
the user as:
WARNING! Modules path isn't set, but is needed to parse this symbol
The solution is to reconfigure the serial port, or to strip the carriage
returns from the log, but this isn't obvious from the error reported by
the script.
Instead, make decode_stacktrace.sh more user friendly by stripping the
trailing carriage return.
Link: https://lkml.kernel.org/r/20231225-decode-stacktrace-cr-v1-1-9f306f38cdde@quicinc.com
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When I use older version aarch64 objdump (2.24) to disassemble aarch64
vmlinux, I get the result like below. There is no space between sp and
offset.
ffff800008010000 <dw_apb_ictl_handle_irq>:
ffff800008010000: d503233f hint #0x19
ffff800008010004: a9bc7bfd stp x29, x30, [sp,#-64]!
ffff800008010008: 90011e60 adrp x0, ffff80000a3dc000 <num_ictlrs>
ffff80000801000c: 910003fd mov x29, sp
ffff800008010010: a9025bf5 stp x21, x22, [sp,#32]
When I use newer version aarch64 objdump (2.35), I get
the result like below.
There is a space between sp and offset.
ffff800008010000 <dw_apb_ictl_handle_irq>:
ffff800008010000: d503233f paciasp
ffff800008010004: a9bc7bfd stp x29, x30, [sp, #-64]!
ffff800008010008: 90011e60 adrp x0, ffff80000a3dc000 <num_ictlrs>
ffff80000801000c: 910003fd mov x29, sp
ffff800008010010: a9025bf5 stp x21, x22, [sp, #32]
Add no space support of regular expression for old version objdump.
Link: https://lkml.kernel.org/r/20231220073629.2658-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Casper Li <casper.li@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
According to Documentation/process/submit-checklist.rst, checkstack does
not point out problems explicitly, but any one function that uses more
than 512 bytes on the stack is a candidate for change, hence it is better
to omit any stack frame sizes smaller than 512 bytes, just change
min_stack to 512 by default.
Link: https://lkml.kernel.org/r/20231219125008.23007-5-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For some unknown reason the regular expression for checkstack only matches
three digit numbers starting with the number "3", or any higher number.
Which means that it skips any stack sizes smaller than 304 bytes. This
makes the checkstack script a bit less useful than it could be.
Change the script to match any number. To be filtered out stack sizes can
be configured with the min_stack variable, which omits any stack frame
sizes smaller than 100 bytes by default.
This is similar with commit aab1f809d7 ("scripts/checkstack.pl: match
all stack sizes for s390").
Link: https://lkml.kernel.org/r/20231219125008.23007-4-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Revive proper alignment for the ksymtab and kcrctab sections
- Fix gen_compile_commands.py tool to resolve symbolic links
- Fix symbolic links to installed debug VDSO files
- Update MAINTAINERS
* tag 'kbuild-fixes-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/export: Ensure natural alignment of kcrctab array
kbuild: fix build ID symlinks to installed debug VDSO files
gen_compile_commands.py: fix path resolve with symlinks in it
MAINTAINERS: Add scripts/clang-tools to Kbuild section
linux/export: Fix alignment for 64-bit ksymtab entries
When a path contains relative symbolic links, os.path.abspath() might
not follow the symlinks and instead return the absolute path with just
the relative paths resolved, resulting in an incorrect path.
1. Say "drivers/hdf/" has some symlinks:
# ls -l drivers/hdf/
total 364
drwxrwxr-x 2 ... 4096 ... evdev
lrwxrwxrwx 1 ... 44 ... framework -> ../../../../../../drivers/hdf_core/framework
-rw-rw-r-- 1 ... 359010 ... hdf_macro_test.h
lrwxrwxrwx 1 ... 55 ... inner_api -> ../../../../../../drivers/hdf_core/interfaces/inner_api
lrwxrwxrwx 1 ... 53 ... khdf -> ../../../../../../drivers/hdf_core/adapter/khdf/linux
-rw-r--r-- 1 ... 74 ... Makefile
drwxrwxr-x 3 ... 4096 ... wifi
2. One .cmd file records that:
# head -1 ./framework/core/manager/src/.devmgr_service.o.cmd
cmd_drivers/hdf/khdf/manager/../../../../framework/core/manager/src/devmgr_service.o := ... \
/path/to/src/drivers/hdf/khdf/manager/../../../../framework/core/manager/src/devmgr_service.c
3. os.path.abspath returns "/path/to/src/framework/core/manager/src/devmgr_service.c", not correct:
# ./scripts/clang-tools/gen_compile_commands.py
INFO: Could not add line from ./framework/core/manager/src/.devmgr_service.o.cmd: File \
/path/to/src/framework/core/manager/src/devmgr_service.c not found
Use os.path.realpath(), which resolves the symlinks and normalizes the paths correctly.
# cat compile_commands.json
...
{
"command": ...
"directory": ...
"file": "/path/to/bla/drivers/hdf_core/framework/core/manager/src/devmgr_service.c"
},
...
Also fix it in parse_arguments().
Signed-off-by: Jialu Xu <xujialu@vimux.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
cc:stable. The remainder address post-6.6 issues or aren't considered
serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
MAINTAINERS: drop Antti Palosaari
highmem: fix a memory copy problem in memcpy_from_folio
nilfs2: fix missing error check for sb_set_blocksize call
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
units: add missing header
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
scripts/gdb/tasks: fix lx-ps command error
mm/Kconfig: make userfaultfd a menuconfig
selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
mm/damon/core: copy nr_accesses when splitting region
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
checkstack: fix printed address
mm/memory_hotplug: fix error handling in add_memory_resource()
mm/memory_hotplug: add missing mem_hotplug_lock
.mailmap: add a new address mapping for Chester Lin
...
Pull devicetree fixes from Rob Herring:
- Fix dt-extract-compatibles for builds with in tree build directory
- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email
- Fix the of_reconfig_get_state_change() return value documentation
- Add missing #power-domain-cells property to QCom MPM
- Fix warnings in i.MX LCDIF and adi,adv7533
* tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: adi,adv75xx: Document #sound-dai-cells
dt-bindings: lcdif: Properly describe the i.MX23 interrupts
dt-bindings: interrupt-controller: Allow #power-domain-cells
of: dynamic: Fix of_reconfig_get_state_change() return value documentation
dt-bindings: display: mediatek: dsi: remove Xinlei's mail
dt: dt-extract-compatibles: Don't follow symlinks when walking tree
