Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
Pull timer and timekeeping updates from Thomas Gleixner:
- Expose CLOCK_TAI to instrumentation to aid with TSN debugging.
- Ensure that the clockevent is stopped when there is no timer armed to
avoid pointless wakeups.
- Make the sched clock frequency handling and rounding consistent.
- Provide a better debugobject hint for delayed works. The timer
callback is always the same, which makes it difficult to identify the
underlying work. Use the work function as a hint instead.
- Move the timer specific sysctl code into the timer subsystem.
- The usual set of improvements and cleanups
* tag 'timers-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Provide a better debugobjects hint for delayed works
time/sched_clock: Fix formatting of frequency reporting code
time/sched_clock: Use Hz as the unit for clock rate reporting below 4kHz
time/sched_clock: Round the frequency reported to nearest rather than down
timekeeping: Consolidate fast timekeeper
timekeeping: Annotate ktime_get_boot_fast_ns() with data_race()
timers/nohz: Switch to ONESHOT_STOPPED in the low-res handler when the tick is stopped
timekeeping: Introduce fast accessor to clock tai
tracing/timer: Add missing argument documentation of trace points
clocksource: Replace cpumask_weight() with cpumask_empty()
timers: Move timer sysctl into the timer code
clockevents: Use dedicated list iterator variable
timers: Simplify calc_index()
timers: Initialize base::next_expiry_recalc in timers_prepare_cpu()
The addition of random_get_entropy_fallback() provides access to
whichever time source has the highest frequency, which is useful for
gathering entropy on platforms without available cycle counters. It's
not necessarily as good as being able to quickly access a cycle counter
that the CPU has, but it's still something, even when it falls back to
being jiffies-based.
In the event that a given arch does not define get_cycles(), falling
back to the get_cycles() default implementation that returns 0 is really
not the best we can do. Instead, at least calling
random_get_entropy_fallback() would be preferable, because that always
needs to return _something_, even falling back to jiffies eventually.
It's not as though random_get_entropy_fallback() is super high precision
or guaranteed to be entropic, but basically anything that's not zero all
the time is better than returning zero all the time.
Finally, since random_get_entropy_fallback() is used during extremely
early boot when randomizing freelists in mm_init(), it can be called
before timekeeping has been initialized. In that case there really is
nothing we can do; jiffies hasn't even started ticking yet. So just give
up and return 0.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Accessing timekeeper::offset_boot in ktime_get_boot_fast_ns() is an
intended data race as the reader side cannot synchronize with a writer and
there is no space in struct tk_read_base of the NMI safe timekeeper.
Mark it so.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220415091920.956045162@linutronix.de
Introduce fast/NMI safe accessor to clock tai for tracing. The Linux kernel
tracing infrastructure has support for using different clocks to generate
timestamps for trace events. Especially in TSN networks it's useful to have TAI
as trace clock, because the application scheduling is done in accordance to the
network time, which is based on TAI. With a tai trace_clock in place, it becomes
very convenient to correlate network activity with Linux kernel application
traces.
Use the same implementation as ktime_get_boot_fast_ns() does by reading the
monotonic time and adding the TAI offset. The same limitations as for the fast
boot implementation apply. The TAI offset may change at run time e.g., by
setting the time or using adjtimex() with an offset. However, these kind of
offset changes are rare events. Nevertheless, the user has to be aware and deal
with it in post processing.
An alternative approach would be to use the same implementation as
ktime_get_real_fast_ns() does. However, this requires to add an additional u64
member to the tk_read_base struct. This struct together with a seqcount is
designed to fit into a single cache line on 64 bit architectures. Adding a new
member would violate this constraint.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220414091805.89667-2-kurt@linutronix.de
Even after commit e1d7ba8735 ("time: Always make sure wall_to_monotonic
isn't positive") it is still possible to make wall_to_monotonic positive
by running the following code:
int main(void)
{
struct timespec time;
clock_gettime(CLOCK_MONOTONIC, &time);
time.tv_nsec = 0;
clock_settime(CLOCK_REALTIME, &time);
return 0;
}
The reason is that the second parameter of timespec64_compare(), ts_delta,
may be unnormalized because the delta is calculated with an open coded
substraction which causes the comparison of tv_sec to yield the wrong
result:
wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -9, .tv_nsec = -900000000 }
That makes timespec64_compare() claim that wall_to_monotonic < ts_delta,
but actually the result should be wall_to_monotonic > ts_delta.
After normalization, the result of timespec64_compare() is correct because
the tv_sec comparison is not longer misleading:
wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -10, .tv_nsec = 100000000 }
Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the
issue.
Fixes: e1d7ba8735 ("time: Always make sure wall_to_monotonic isn't positive")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211213135727.1656662-1-liaoyu15@huawei.com
clock_was_set() unconditionaly invokes retrigger_next_event() on all online
CPUs. This was necessary because that mechanism was also used for resume
from suspend to idle which is not longer the case.
The bases arguments allows the callers of clock_was_set() to hand in a mask
which tells clock_was_set() which of the hrtimer clock bases are affected
by the clock setting. This mask will be used in the next step to check
whether a CPU base has timers queued on a clock base affected by the event
and avoid the SMP function call if there are none.
Add a @bases argument, provide defines for the active bases masking and
fixup all callsites.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135158.691083465@linutronix.de
do_adjtimex() might end up scheduling a delayed clock_was_set() via
timekeeping_advance() and then invoke clock_was_set() directly which is
pointless.
Make timekeeping_advance() return whether an invocation of clock_was_set()
is required and handle it at the call sites which allows do_adjtimex() to
issue a single direct call if required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135158.580966888@linutronix.de
Resuming timekeeping is a clock-was-set event and uses the clock-was-set
notification mechanism. This is in the way of making the clock-was-set
update for hrtimers selective so unnecessary IPIs are avoided when a CPU
base does not have timers queued which are affected by the clock setting.
Distangle it by invoking hrtimer_resume() on each unfreezing CPU and invoke
the new timerfd_resume() function from timekeeping_resume() which is the
only place where this is needed.
Rename hrtimer_resume() to hrtimer_resume_local() to reflect the change.
With this the clock_was_set*() functions are not longer required to IPI all
CPUs unconditionally and can get some smarts to avoid them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135158.488853478@linutronix.de
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
System time snapshots are not conveying information about the current
clocksource which was used, but callers like the PTP KVM guest
implementation have the requirement to evaluate the clocksource type to
select the appropriate mechanism.
Introduce a clocksource id field in struct clocksource which is by default
set to CSID_GENERIC (0). Clocksource implementations can set that field to
a value which allows to identify the clocksource.
Store the clocksource id of the current clocksource in the
system_time_snapshot so callers can evaluate which clocksource was used to
take the snapshot and act accordingly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-5-jianyong.wu@arm.com
The struct clocksource callbacks enable() and disable() are described as a
way to allow clock sources to enter a power save mode. See commit
4614e6adaf ("clocksource: add enable() and disable() callbacks")
But using runtime PM from these callbacks triggers a cyclic lockdep warning when
switching clock source using change_clocksource().
# echo e60f0000.timer > /sys/devices/system/clocksource/clocksource0/current_clocksource
======================================================
WARNING: possible circular locking dependency detected
------------------------------------------------------
migration/0/11 is trying to acquire lock:
ffff0000403ed220 (&dev->power.lock){-...}-{2:2}, at: __pm_runtime_resume+0x40/0x74
but task is already holding lock:
ffff8000113c8f88 (tk_core.seq.seqcount){----}-{0:0}, at: multi_cpu_stop+0xa4/0x190
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (tk_core.seq.seqcount){----}-{0:0}:
ktime_get+0x28/0xa0
hrtimer_start_range_ns+0x210/0x2dc
generic_sched_clock_init+0x70/0x88
sched_clock_init+0x40/0x64
start_kernel+0x494/0x524
-> #1 (hrtimer_bases.lock){-.-.}-{2:2}:
hrtimer_start_range_ns+0x68/0x2dc
rpm_suspend+0x308/0x5dc
rpm_idle+0xc4/0x2a4
pm_runtime_work+0x98/0xc0
process_one_work+0x294/0x6f0
worker_thread+0x70/0x45c
kthread+0x154/0x160
ret_from_fork+0x10/0x20
-> #0 (&dev->power.lock){-...}-{2:2}:
_raw_spin_lock_irqsave+0x7c/0xc4
__pm_runtime_resume+0x40/0x74
sh_cmt_start+0x1c4/0x260
sh_cmt_clocksource_enable+0x28/0x50
change_clocksource+0x9c/0x160
multi_cpu_stop+0xa4/0x190
cpu_stopper_thread+0x90/0x154
smpboot_thread_fn+0x244/0x270
kthread+0x154/0x160
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
&dev->power.lock --> hrtimer_bases.lock --> tk_core.seq.seqcount
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tk_core.seq.seqcount);
lock(hrtimer_bases.lock);
lock(tk_core.seq.seqcount);
lock(&dev->power.lock);
*** DEADLOCK ***
2 locks held by migration/0/11:
#0: ffff8000113c9278 (timekeeper_lock){-.-.}-{2:2}, at: change_clocksource+0x2c/0x160
#1: ffff8000113c8f88 (tk_core.seq.seqcount){----}-{0:0}, at: multi_cpu_stop+0xa4/0x190
Rework change_clocksource() so it enables the new clocksource and disables
the old clocksource outside of the timekeeper_lock and seqcount write held
region. There is no requirement that these callbacks are invoked from the
lock held region.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210211134318.323910-1-niklas.soderlund+renesas@ragnatech.se
Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
"This cleans up two ancient timer features that were never completed in
the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.
There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
of clocksource implementations, the ARM EBSA110 platform. Rather than
changing to use modern timekeeping, we remove the platform entirely as
Russell no longer uses his machine and nobody else seems to have one
any more.
The conditional code for using arch_gettimeoffset() is removed as a
result.
For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
platform. These all do timer ticks slighly differently, and this gets
cleaned up to the point they at least all call the same helper
function.
Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
Kconfig, the polarity is now reversed, with the few remaining ones
selecting LEGACY_TIMER_TICK instead"
* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
timekeeping: default GENERIC_CLOCKEVENTS to enabled
timekeeping: remove xtime_update
m68k: remove timer_interrupt() function
m68k: change remaining timers to legacy_timer_tick
m68k: m68328: use legacy_timer_tick()
m68k: sun3/sun3c: use legacy_timer_tick
m68k: split heartbeat out of timer function
m68k: coldfire: use legacy_timer_tick()
parisc: use legacy_timer_tick
ARM: rpc: use legacy_timer_tick
ia64: convert to legacy_timer_tick
timekeeping: add CONFIG_LEGACY_TIMER_TICK
timekeeping: remove arch_gettimeoffset
net: remove am79c961a driver
ARM: remove ebsa110 platform
The kernel-doc parser complains:
kernel/time/timekeeping.c:1543: warning: Function parameter or member
'ts' not described in 'read_persistent_clock64'
kernel/time/timekeeping.c:764: warning: Function parameter or member
'tk' not described in 'timekeeping_forward_now'
kernel/time/timekeeping.c:1331: warning: Function parameter or member
'ts' not described in 'timekeeping_inject_offset'
kernel/time/timekeeping.c:1331: warning: Excess function parameter 'tv'
description in 'timekeeping_inject_offset'
Add the missing parameter documentations and rename the 'tv' parameter of
timekeeping_inject_offset() to 'ts' so it matches the implemention.
[ tglx: Reworded a few docs and massaged changelog ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-5-git-send-email-alex.shi@linux.alibaba.com
Address the following kernel-doc markup warnings:
kernel/time/timekeeping.c:1563: warning: Function parameter or member
'wall_time' not described in 'read_persistent_wall_and_boot_offset'
kernel/time/timekeeping.c:1563: warning: Function parameter or member
'boot_offset' not described in 'read_persistent_wall_and_boot_offset'
The parameters are described but miss the leading '@' and the colon after
the parameter names.
[ tglx: Massaged changelog ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-6-git-send-email-alex.shi@linux.alibaba.com
The kernel-doc parser complains about:
kernel/time/timekeeping.c:651: warning: Function parameter or member
'nb' not described in 'pvclock_gtod_register_notifier'
kernel/time/timekeeping.c:670: warning: Function parameter or member
'nb' not described in 'pvclock_gtod_unregister_notifier'
Add the missing parameter explanations.
[ tglx: Massaged changelog ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-3-git-send-email-alex.shi@linux.alibaba.com
Alex reported the following warning:
kernel/time/timekeeping.c:464: warning: Function parameter or member
'tkf' not described in '__ktime_get_fast_ns'
which is not entirely correct because the documented function is
ktime_get_mono_fast_ns() which does not have a parameter, but the
kernel-doc parser looks at the function declaration which follows the
comment and complains about the missing parameter documentation.
Aside of that the documentation for the rest of the NMI safe accessors is
either incomplete or missing.
- Move the function documentation to the right place
- Fixup the references and inconsistencies
- Add the missing documentation for ktime_get_raw_fast_ns()
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Various static functions in the timekeeping code have function comments
which pretend to be kernel-doc, but are incomplete and trigger parser
warnings.
As these functions are local to the timekeeping core code there is no need
to expose them via kernel-doc.
Remove the double star kernel-doc marker and remove excess newlines.
[ tglx: Massaged changelog and removed excess newlines ]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1605252275-63652-4-git-send-email-alex.shi@linux.alibaba.com
There are no more users of xtime_update aside from legacy_timer_tick(),
so fold it into that function and remove the declaration.
update_process_times() is now only called inside of the kernel/time/
code, so the declaration can be moved there.
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With Arm EBSA110 gone, nothing uses it any more, so the corresponding
code and the Kconfig option can be removed.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
