linux

mirror of https://github.com/Dasharo/linux.git synced 2026-03-06 15:25:10 -08:00

Author	SHA1	Message	Date
Linus Torvalds	6b0e34a030	Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Mainly driver updates this time around. There's a single patch to the core clk framework that simplifies a runtime PM call. Otherwise the majority of the diff falls to a few SoC drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new hardware support and what comes along with that is quite a few lines of data and some clk_ops code. Beyond the new hardware support we have the usual pile of driver updates that add missing clks on already supported SoCs or fix up problems like bad clk tree descriptions. It's nice to see that more drivers are moving to clk_hw based APIs too. New Drivers: - Add STM32MP13 RCC driver (Reset Clock Controller) - MediaTek MT8186 SoC clk support - Airoha EN7523 SoC system clocks - Clock driver for exynosautov9 SoC - Renesas R-Car V4H and RZ/V2M SoCs - Renesas RZ/G2UL SoC - LPASS clk driver for Qualcomm sc7280 SoC - GCC clk driver for Qualcomm SC8280XP SoC Updates: - SDCC uses floor clk ops on Qualcomm MSM8976 - Add modem reset and fix RPM clks on Qualcomm MSM8976 - Add the two missing CLKOUT clocks for U8500/DB8500 SoC - Mark some clks critical on Ingenic X1000 - Convert ux500 to clk_hw - Move MediaTek driver to clk_hw provider APIs - Use i2c driver probe_new to avoid id scans - Convert a number of Rockchip dt bindings to YAML - Mark hclk_vo critical on Rockchip rk3568 - Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage - Various cleanups like memory allocation error checks and plugged leaks - Allwinner H6 RTC clock support - Allwinner H616 32 kHz clock support - Add the Universal Flash Storage clock on Renesas R-Car S4-8 - Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas RZ/G2UL - Add display clock support on Renesas RZ/G2L - Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3 - Add 27 MHz phy PLL ref clock on i.MX - Add mcore_booted module parameter to tell kernel M core has already booted for i.MX - Remove snvs clock on i.MX because it was for secure world only - Add dt bindings for i.MX8MN GPT - Add DISP2 pixel clock for i.MX8MP - Add clkout1/2 for i.MX8MP - Fix parent clock of ubs_root_clk for i.MX8MP - Implement better RCG parking on Qualcomm SoCs using the shared RCG clk ops - Kerneldoc fixes - Switch Tegra BPMP to determine_rate clk op - Add a pointer to dt schema for generic clock bindings" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits) Revert "clk: qcom: regmap-mux: add pipe clk implementation" Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc() clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC clk: ti: clkctrl: replace usage of found with dedicated list iterator variable clk: ti: composite: Prefer kcalloc over open coded arithmetic dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: mediatek: mt8173: Switch to clk_hw provider APIs clk: mediatek: Switch to clk_hw provider APIs ...	2022-05-27 15:33:24 -07:00
Linus Torvalds	ae86218328	Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM DT updates from Arnd Bergmann: "There are 40 branches this time, adding a lot of new hardware support, and cleanups. Krzysztof Kozlowski continues his treewide cleanups. There are a number of new SoCs, all of them as part of existing families, and typically added along with a reference board: - Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L general-purpose MPU. - Renesas RZ/V2M (R9A09G011) is a smart camera SoC - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76 cores and deep learning accerlation. - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7 and dual Wifi-6. - Corstone1000 is a generic platform from Arm that is used for designing custom SoCs, the support for now is for the Fixed Virtual Platform emulation for it. - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in upcoming Chromebooks. - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first MMU-less SoC to be added in a while New machines based on already supported SoCs this time are mainly for 32-bit platforms and include: - Two wireless routers based on Broadcom bcm4708 - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly for the industrial embedded market, and on NXP LS1021A based IOT board. - Two ethernet switches based on Microchip LAN966 - Eight Qualcomm Snapdragon based machines, including a smartwatch, a Chromebook board and some phones - Another phone based on the old ST-Ericsson Ux500 platform - Seven STM32MP1 based boards - Four single-board computers based on Rockchip RK3566/RK3568" * tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits) ARM: dts: kswitch-d10: enable networking ARM: dts: lan966x: add switch node ARM: dts: lan966x: add serdes node ARM: dts: lan966x: add reset switch reset node ARM: dts: lan966x: add MIIM nodes ARM: dts: lan966x: add hwmon node ARM: dts: lan966x: add basic Kontron KSwitch D10 support ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: rename pinctrl nodes ARM: dts: at91: sama7g5: remove interrupt-parent from gic node ARM: dts: at91: use generic node name for dataflash ARM: dts: turris-omnia: Add atsha204a node arm64: dts: mt8192: Follow binding order for SCP registers arm64: dts: mediatek: add mtk-snfi for mt7622 arm64: dts: mediatek: mt8195-demo: enable uart1 ...	2022-05-26 10:28:12 -07:00
Stephen Boyd	71cc785d29	Merge branch 'clk-qcom' into clk-next * clk-qcom: Revert "clk: qcom: regmap-mux: add pipe clk implementation" Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" clk: qcom: rcg2: Cache CFG register updates for parked RCGs clk: qcom: add sc8280xp GCC driver dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings clk: qcom: gcc-msm8976: Add modem reset dt-bindings: clk: qcom: gcc-msm8976: Add modem reset clk: qcom: gcc-msm8976: Set floor ops for SDCC dt-bindings: clock: qcom,gcc-apq8064: Fix typo in compatible and split apq8084 clk: qcom: smd: Update MSM8976 RPM clocks. clk: qcom: gcc-msm8998: add SSC-related clocks dt-bindings: clock: gcc-msm8998: Add definitions of SSC-related clocks dt-bindings: clock: qcom,rpmcc: add clocks property dt-bindings: clock: qcom,rpmcc: convert to dtschema clk: qcom: lpass: Add support for LPASS clock controller for SC7280 dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280 clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks clk: qcom: regmap-mux: add pipe clk implementation	2022-05-25 00:27:32 -07:00
Stephen Boyd	d75c26a926	Merge branches 'clk-rockchip', 'clk-ingenic', 'clk-bindings', 'clk-samsung' and 'clk-stm' into clk-next - Mark some clks critical on Ingenic X1000 - Add STM32MP13 RCC driver (Reset Clock Controller) * clk-rockchip: dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML dt-bindings: clock: convert rockchip,px30-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML dt-binding: clock: Add missing rk3568 cru bindings clk: rockchip: Mark hclk_vo as critical on rk3568 dt-bindings: clock: fix rk3399 cru clock issues dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml * clk-ingenic: clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs mips: ingenic: Do not manually reference the CPU clock clk: ingenic: Mark critical clocks in Ingenic SoCs clk: ingenic: Allow specifying common clock flags * clk-bindings: dt-bindings: clock: Replace common binding with link to schema * clk-samsung: dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: samsung: exynosautov9: add cmu_peric1 clock support clk: samsung: exynosautov9: add cmu_peric0 clock support clk: samsung: exynosautov9: add cmu_fsys2 clock support clk: samsung: exynosautov9: add cmu_busmc clock support clk: samsung: exynosautov9: add cmu_peris clock support clk: samsung: exynosautov9: add cmu_core clock support clk: samsung: add top clock support for Exynos Auto v9 SoC dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings dt-bindings: clock: add clock binding definitions for Exynos Auto v9 * clk-stm: clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC	2022-05-25 00:27:09 -07:00
Stephen Boyd	d3d88716a6	Merge branches 'clk-ux500', 'clk-mtk', 'clk-tegra', 'clk-allwinner' and 'clk-imx' into clk-next - Convert ux500 to clk_hw - Add the two missing CLKOUT clocks for U8500/DB8500 SoC - MediaTek MT8186 SoC clk support - Move MediaTek driver to clk_hw provider APIs * clk-ux500: clk: ux500: fix a possible off-by-one in u8500_prcc_reset_base() clk: ux500: Implement the missing CLKOUT clocks clk: ux500: Rewrite PRCMU clocks to use clk_hw_* clk: ux500: Drop .is_prepared state from PRCMU clocks clk: ux500: Drop .is_enabled state from PRCMU clocks dt-bindings: clock: u8500: Add clkout clock bindings * clk-mtk: (22 commits) clk: mediatek: mt8173: Switch to clk_hw provider APIs clk: mediatek: Switch to clk_hw provider APIs clk: mediatek: Replace 'struct clk' with 'struct clk_hw' clk: mediatek: apmixed: Drop error message from clk_register() failure clk: mediatek: Make mtk_clk_register_composite() static clk: mediatek: use en_mask as a pure div_en_mask clk: mediatek: update compatible string for MT7986 ethsys clk: mediatek: Add MT8186 ipesys clock support clk: mediatek: Add MT8186 mdpsys clock support clk: mediatek: Add MT8186 camsys clock support clk: mediatek: Add MT8186 vencsys clock support clk: mediatek: Add MT8186 vdecsys clock support clk: mediatek: Add MT8186 imgsys clock support clk: mediatek: Add MT8186 wpesys clock support clk: mediatek: Add MT8186 mmsys clock support clk: mediatek: Add MT8186 mfgsys clock support clk: mediatek: Add MT8186 imp i2c wrapper clock support clk: mediatek: Add MT8186 apmixedsys clock support clk: mediatek: Add MT8186 infrastructure clock support clk: mediatek: Add MT8186 topckgen clock support ... * clk-tegra: clk: tegra: Update kerneldoc to match prototypes clk: tegra: Replace .round_rate() with .determine_rate() clk: tegra: Register clocks from root to leaf clk: tegra: Add missing reset deassertion * clk-allwinner: clk: sunxi-ng: h616: Add PLL derived 32KHz clock clk: sunxi-ng: h6-r: Add RTC gate clock * clk-imx: clk: imx8mp: fix usb_root_clk parent clk: imx8mp: add clkout1/2 support clk: imx: scu: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage clk: imx8mp: Add DISP2 pixel clock clk: imx: scu: fix a potential memory leak in __imx_clk_gpr_scu() clk: imx: Add check for kcalloc clk: imx8mn: add GPT support dt-bindings: imx: add clock bindings for i.MX8MN GPT clk: imx: Remove the snvs clock clk: imx8m: check mcore_booted before register clk clk: imx: add mcore_booted module paratemter clk: imx8mq: add 27m phy pll ref clock	2022-05-25 00:26:52 -07:00
Stephen Boyd	2c29798c5d	Merge branches 'clk-ti', 'clk-cleanup', 'clk-airoha', 'clk-i2c-simple' and 'clk-renesas' into clk-next - Airoha EN7523 SoC system clocks - Use i2c driver probe_new to avoid id scans * clk-ti: clk: ti: clkctrl: replace usage of found with dedicated list iterator variable clk: ti: composite: Prefer kcalloc over open coded arithmetic clk: keystone: syscon-clk: Add support for AM62 epwm-tbclk dt-bindings: clock: ehrpwm: Add AM62 specific compatible * clk-cleanup: clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc() clk: fixed-rate: Remove redundant if statement clk: mux: remove redundant initialization of variable width clk: using pm_runtime_resume_and_get instead of pm_runtime_get_sync clk: actions: remove redundant assignment after a mask operation * clk-airoha: clk: en7523: fix wrong pointer check in en7523_clk_probe() clk: en7523: Add clock driver for Airoha EN7523 SoC dt-bindings: Add en7523-scu device tree binding documentation * clk-i2c-simple: clk: renesas-pcie: use simple i2c probe function clk: si570: use i2c_match_id and simple i2c probe clk: si544: use i2c_match_id and simple i2c probe clk: si5351: use i2c_match_id and simple i2c probe clk: si5341: use simple i2c probe function clk: si514: use simple i2c probe function clk: max9485: use simple i2c probe function clk: cs2000-cp: use simple i2c probe function clk: cdce925: use i2c_match_id and simple i2c probe clk: cdce706: use simple i2c probe function * clk-renesas: (48 commits) clk: renesas: r9a09g011: Add eth clock and reset entries clk: renesas: Add RZ/V2M support using the rzg2l driver clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg clk: renesas: rzg2l: Make use of CLK_MON registers optional clk: renesas: rzg2l: Set HIWORD mask for all mux and dividers clk: renesas: rzg2l: Add read only versions of the clk macros clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macro dt-bindings: clock: renesas,rzg2l: Document RZ/V2M SoC clk: renesas: r9a07g044: Fix OSTM1 module clock name clk: renesas: r9a07g043: Add clock and reset entries for ADC clk: renesas: r9a07g043: Add TSU clock and reset entry clk: renesas: r9a07g043: Add RSPI clock and reset entries clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus Controller clk: renesas: r9a07g044: Add DSI clock and reset entries clk: renesas: r9a07g044: Add LCDC clock and reset entries clk: renesas: r9a07g044: Add M4 Clock support clk: renesas: r9a07g044: Add M3 Clock support clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks support clk: renesas: r9a07g044: Add M1 clock support clk: renesas: rzg2l: Add DSI divider clk support ...	2022-05-25 00:26:38 -07:00
Gabriel Fernandez	722dc8a1d5	dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC New compatible to manage clock and reset of STM32MP13 SoC. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-2-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-05-20 21:07:48 -07:00
Chanho Park	538101dd7c	dt-bindings: clock: exynosautov9: correct count of NR_CLK _NR_CLKS which can be used to register clocks via nr_clk_ids. The clock IDs are started from 1. So, _NR_CLKS should be defined to "the last clock id + 1" Fixes: `680e1c8370` ("dt-bindings: clock: add clock binding definitions for Exynos Auto v9") Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220520030625.145324-1-chanho61.park@samsung.com Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2022-05-20 20:29:13 -07:00
Bjorn Andersson	a66a82f2a5	dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings Add binding for the Qualcomm SC8280XP Global Clock controller. The clock-names property is purposefully omitted, to clearly communicate to the writer (and reader) of the DeviceTree source based on this binding that the order of "clocks" is significant, in contrast to previous GCC bindings. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220505025457.1693716-2-bjorn.andersson@linaro.org	2022-05-19 16:41:32 -05:00
Arnd Bergmann	d4dcdc53c4	Merge tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.19 This adds MDIO bus description on the IPQ6018 platform. On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei Ascend G7 gains sound card definition and clarified installation instructions. MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock controller, on-chip memory, watchdog and various cleanup changes. The Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer definition, while Huawei Nexus 6P gains eMMC support. On MSM8996 the modem and sensor remtoeprocs are added and enabled in the Dragonboard 820c and the Xiaomi devices. On MSM8998 a few newly added clocks related to the sensor subsystem bus are marked as protected by default and the OnePlus devices gains NFC. The SC7180 platform and devices thereon are further polished and limozeen moves to using edp-panel for EDID-based detection, over statically defined panels. On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio clocks, resets for SDCC controllers and a new CRD revision are added. A supply glitch on the PCIe power and a current leak for Bluetooth during suspend are corrected. The Herobrine board gains eDP support and the IDP gains backlight. USB is marked wakeup capable. On SDM845 the IPA, WLED based backlight and second WiFi channel are enabled for Xiaomi Pocophone F1, the firmware name is modified to not conflict with other boards. On RB3 the CAN bus controller is added and the WiFi calibration variant is defined to allow adding the board's calibration information into linux-firmware. SM6350 gains I2C busses, UFS and WiFi support, and the numbering of uart9 is corrected. On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled. On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for the SA8155p ADP board. The PDC interrupt controller is also added and described as wakup interrupt parent for TLMM. Camera subsystem and control interface are defined for SM8250. On the Sony Xperia 1 II the audio amplifiers are enabled. On SM8350 GPI DMA engines are added and linked to the I2C and SPI serial engines. Surface Duo 2 gains battery charger support. On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP serial engine instances are added. Remoteproc instances are enabled on SM8450 HDK. Last, but not least, a number of DeviceTree validation errors across various boards are corrected. * tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (150 commits) arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling arm64: dts: qcom: sc7280: eDP for herobrine boards arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP arm64: dts: qcom: sm8150: Fix iommu sid value for SDC2 controller arm64: dts: qcom: sm8350-duo2: enable battery charger arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2 arm64: dts: qcom: pm8350c: Add pwm support arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetooth arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth arm64: dts: qcom: sc7180: Remove ipa interconnect node arm64: dts: qcom: sc7280-idp: Enable GPI DMAs arm64: dts: qcom: sc7280: Add GENI I2C/SPI DMA channels arm64: dts: qcom: sc7280: Add GPI DMAengines arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@) arm64: dts: qcom: db845c: Add support for MCP2517FD arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd arm64: dts: qcom: sm8250: camss: Add CCI definitions ... Link: https://lore.kernel.org/r/20220509204451.325675-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2022-05-09 23:26:34 +02:00
Arnd Bergmann	1bc44c1e79	Merge tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.19-rc1 This adds some improvements on Tegra234 (QSPI, CCPLEX), improves the SDMMC clock speed on Tegra194 and adds the ASRC audio block on various chip generations. Memory controller channels are also added on Tegra186 and later and the missing DFLL reset is added for Tegra210. * tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add missing DFLL reset on Tegra210 arm64: tegra: Add memory controller channels arm64: tegra: Enable ASRC on various platforms arm64: tegra: Add ASRC device on Tegra186 and later arm64: tegra: Update PWM fan node name arm64: tegra: Add node for Tegra234 CCPLEX cluster arm64: tegra: Add QSPI controllers on Tegra234 arm64: tegra: Update SDMMC1/3 clock source for Tegra194 Link: https://lore.kernel.org/r/20220506143005.3916655-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2022-05-06 22:39:39 +02:00
Arnd Bergmann	4a17dc417a	Merge tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.19 (take two) - I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK development board, - Initial support for the R-Car V4H SoC and the Renesas White Hawk development board stack, - DMA, RTC, and USB support for the RZ/N1D SoC, - Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit Board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (40 commits) arm64: dts: renesas: Add initial device tree for RZ/V2M EVK arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY ARM: dts: r9a06g032: Add USB PHY DT support ARM: dts: r9a06g032: Add internal PCI bridge node ARM: dts: r9a06g032: Describe the RTC arm64: dts: renesas: Add interrupt-names to CANFD nodes arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA arm64: dts: renesas: r9a07g043: Add TSU node arm64: dts: renesas: r9a07g043: Add OPP table arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes arm64: dts: renesas: r9a07g054: Fix external clk node names arm64: dts: renesas: r9a07g044: Fix external clk node names ARM: dts: r9a06g032: Fix the NAND controller node ARM: dts: r9a06g032: Fill the UART DMA properties ARM: dts: r9a06g032: Describe the DMA router ARM: dts: r9a06g032: Add the two DMA nodes arm64: dts: renesas: Remove empty rgb output endpoints ... Link: https://lore.kernel.org/r/cover.1651828603.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2022-05-06 22:30:59 +02:00
Arnd Bergmann	2367ee1ab9	Merge tag 'samsung-dt64-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.19, part two 1. Cleanups: unused and undocumented dma-channels and dma-requests. 2. Add clock controllers to ExynosAutov9. * tag 'samsung-dt64-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: switch UFS clock node in ExynosAutov9 arm64: dts: exynos: switch USI clocks in ExynosAutov9 arm64: dts: exynos: add initial CMU clock nodes in ExynosAutov9 dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings dt-bindings: clock: add clock binding definitions for Exynos Auto v9 arm64: dts: fsd: drop useless 'dma-channels/requests' properties arm64: dts: exynos: drop useless 'dma-channels/requests' properties arm64: dts: exynos: move XTCXO clock frequency to board in Exynos Auto v9 Link: https://lore.kernel.org/r/20220506081438.149192-5-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2022-05-06 22:26:29 +02:00
Andre Przywara	31ab516980	clk: sunxi-ng: h616: Add PLL derived 32KHz clock The RTC section of the H616 manual mentions in a half-sentence the existence of a clock "32K divided by PLL_PERI(2X)". This is used as one of the possible inputs for the mux that selects the clock for the 32 KHz fanout pad. On the H616 this is routed to pin PG10, and some boards use that clock output to compensate for a missing 32KHz crystal. On the OrangePi Zero2 this is for instance connected to the LPO pin of the WiFi/BT chip. The new RTC clock binding requires this clock to be named as one input clock, so we need to expose this to the DT. In contrast to the D1 SoC there does not seem to be a gate for this clock, so just use a fixed divider clock, using a newly assigned clock number. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220428230933.15262-3-andre.przywara@arm.com	2022-05-06 18:03:52 +02:00
Andre Przywara	38d321b61b	clk: sunxi-ng: h6-r: Add RTC gate clock The H6 and H616 feature an (undocumented) bus clock gate for accessing the RTC registers. This seems to be enabled at reset (or by the BootROM), so we got away without it so far, but exists regardless. Since the new RTC clock binding for the H616 requires this "bus" clock to be specified in the DT, add this to R_CCU clock driver and expose it on the DT side with a new number. We do this for both the H6 and H616, but mark it as IGNORE_UNUSED, as we cannot reference it in any H6 DTs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220428230933.15262-2-andre.przywara@arm.com	2022-05-06 18:02:40 +02:00
Geert Uytterhoeven	d7f49cb451	Merge tag 'renesas-r9a09g011-dt-binding-defs-tag' into renesas-arm-dt-for-v5.19 Renesas RZ/V2M DT Binding Definitions Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by driver and DT source files.	2022-05-06 11:09:45 +02:00
Adam Skladowski	7e555e9975	dt-bindings: clk: qcom: gcc-msm8976: Add modem reset Add modem reset for MSM8976. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220426073048.11509-3-a39.skl@gmail.com	2022-05-05 22:22:27 -05:00
Arnd Bergmann	0fd8954b9e	Merge tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT for v5.19, round 1 Highlights: ---------- -MCU: -Fix pinctrl node names to match with pinctrl yaml. - MPU: -General: - Fix pinctrl node names to match with pinctrl yaml. - Add Protonics boards support based on STM32MP151A SoC: - PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with TI and Micrel 10BaseT Phys and wifi support. - PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity and CO2 sensors. - PRTT1A - 10BaseT1L multi functional controller. - ST boards: - Add RTC support on stm32mp13. - Add button and heartbit support on stm32mp13 DK board. - Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based on OP-TEE OS and SCMI protocol. - DH boards: - Use MCO2 to generate PHY clock and ETHRX clock in order to release internal PLL for a better SD card usage. - Add 1ms PHY post-reset on Avenger96 board to match with PHY requirements. * tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits) ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1) ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15 dt-bindings: reset: stm32mp15: rename RST_SCMI define dt-bindings: clock: stm32mp15: rename CK_SCMI define dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure" dt-bindings: rcc: Add optional external ethernet RX clock properties ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131 ARM: dts: stm32: add support for Protonic PRTT1x boards ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards dt-bindings: arm: stm32: correct blank lines dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards ARM: dts: stm32: enable RTC support on stm32mp135f-dk ARM: dts: stm32: add RTC node on stm32mp131 ARM: dts: stm32: Fix PHY post-reset delay on Avenger96 ARM: dts: stm32: fix pinctrl node name warnings (MPU soc) ... Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2022-05-05 16:44:19 +02:00
Geert Uytterhoeven	049bddcb89	Merge tag 'renesas-r9a09g011-dt-binding-defs-tag' into renesas-clk-for-v5.19 Renesas RZ/V2M DT Binding Definitions Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by driver and DT source files.	2022-05-05 12:10:49 +02:00
Phil Edworthy	96055bf71a	dt-bindings: clock: Add r9a09g011 CPG Clock Definitions Define RZ/V2M (R9A09G011) Clock Pulse Generator module clock outputs (CPG_CLK_ON* registers), and reset definitions (CPG_RST_* registers) in Section 48.5 ("Register Description") of the RZ/V2M Hardware User's Manual (Rev. 1.10, Sep. 2021). Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-3-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>	2022-05-05 12:04:58 +02:00
Chanho Park	680e1c8370	dt-bindings: clock: add clock binding definitions for Exynos Auto v9 Add device tree clock binding definitions for below CMU blocks. - CMU_TOP - CMU_BUSMC - CMU_CORE - CMU_FYS2 - CMU_PERIC0 / C1 - CMU_PERIS Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-2-chanho61.park@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>	2022-05-05 08:57:45 +02:00
Alexandre Torgue	9b0df59252	dt-bindings: clock: stm32mp15: rename CK_SCMI define As we only have one SCMI instance, it's not necessary to add an index to the name. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Rob Herring <robh@kernel.org>	2022-05-04 11:00:53 +02:00
Lucas Stach	43896f56b5	clk: imx8mp: add clkout1/2 support clkout1 and clkout2 allow to supply clocks from the SoC to the board, which is used by some board designs to provide reference clocks. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220427162131.3127303-1-l.stach@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>	2022-05-02 12:38:10 +03:00
Geert Uytterhoeven	d1fcd661ba	Merge tag 'renesas-r8a779g0-dt-binding-defs-tag' into renesas-clk-for-v5.19 Renesas R-Car V4H DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car V4H (R8A779G0) SoC, shared by driver and DT source files.	2022-04-29 12:23:34 +02:00
Geert Uytterhoeven	a4744a1de6	Merge tag 'renesas-r8a779g0-dt-binding-defs-tag' into renesas-arm-dt-for-v5.19 Renesas R-Car V4H DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car V4H (R8A779G0) SoC, shared by driver and DT source files.	2022-04-29 12:22:36 +02:00

1 2 3 4 5 ...

1580 Commits