Use the fbcon_info_from_console() wrapper which was added to kernel
v5.19 with commit 409d6c95f9 ("fbcon: Introduce wrapper for console->fb_info lookup").
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Verify that the fbdev or drm driver correctly adjusted the virtual
screen sizes. On failure report the failing driver and reject the screen
size change.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
We need to prevent that users configure a screen size which is smaller than the
currently selected font size. Otherwise rendering chars on the screen will
access memory outside the graphics memory region.
This patch adds a new function fbcon_modechange_possible() which
implements this check and which later may be extended with other checks
if necessary. The new function is called from the FBIOPUT_VSCREENINFO
ioctl handler in fbmem.c, which will return -EINVAL if userspace asked
for a too small screen size.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
Prevent that users set a font size which is bigger than the physical screen.
It's unlikely this may happen (because screens are usually much larger than the
fonts and each font char is limited to 32x32 pixels), but it may happen on
smaller screens/LCD displays.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v4.14+
Image.dx gets wrong value because of missing '()'.
If xres == logo->width and n == 1, image.dx = -16.
Signed-off-by: Guiling Deng <greens9@163.com>
Fixes: 3d8b1933eb ("fbdev: fbmem: add config option to center the bootup logo")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Helge Deller <deller@gmx.de>
The platform devices registered by sysfb match with firmware-based DRM or
fbdev drivers, that are used to have early graphics using a framebuffer
provided by the system firmware.
DRM or fbdev drivers later are probed and remove conflicting framebuffers,
leading to these platform devices for generic drivers to be unregistered.
But the current solution has a race, since the sysfb_init() function could
be called after a DRM or fbdev driver is probed and request to unregister
the devices for drivers with conflicting framebuffes.
To prevent this, disable any future sysfb platform device registration by
calling sysfb_disable(), if a driver requests to remove the conflicting
framebuffers.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-4-javierm@redhat.com
clk_put() already checks the clk ptr using !clk and IS_ERR()
so there is no need to check it again before calling it.
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
clk_disable() already checks the clk ptr using IS_ERR_OR_NULL(clk) and
clk_enable() checks the clk ptr using !clk, so there is no need to check clk
ptr again before calling them.
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Helge Deller <deller@gmx.de>
In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of
type int. Then, copy_from_user() may cause a heap overflow because it is used
as the third argument of copy_from_user().
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is
deprecated. If drivers implement power management, they should use the
generic power management framework, not the PCI-specific hooks.
Convert the sample code to use the generic power management framework.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is
deprecated. The cirrusfb driver has never implemented power management at
all, but if it ever does, it should use the generic power management
framework, not the PCI-specific hooks.
Remove the commented-out references to the PCI-specific power management
hooks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Variable stolen_size can be left uninitialized in a code path with
INTEL_855_GMCH_GMS_DISABLED. Fix this by initializing the variable to 0.
Also fix indentation of function arguments.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Aperture size for i9x5 variants is determined from PCI base address.
if (pci_resource_start(pdev, 2) & 0x08000000)
*aperture_size = MB(128);
...
This condition is incorrect as 128 MiB address can have the address
set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just
use pci_resource_len().
The true settings of the aperture size is in the MSAC register, which
could be used instead. However the value is used only as an info message,
so it doesn't matter.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull more parisc architecture updates from Helge Deller:
"A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and
add auto-detection of primary graphics card for framebuffer driver"
* tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/stifb: Keep track of hardware path of graphics card
parisc/stifb: Implement fb_is_primary_device()
parisc: fix a crash with multicore scheduler
Keep the pa_path (hardware path) of the graphics card in sti_struct and use
this info to give more useful info which card is currently being used.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
Pull fbdev fixes and updates from Helge Deller:
"A buch of small fixes and cleanups, including:
- vesafb: Fix a use-after-free due early fb_info cleanup
- clcdfb: Fix refcount leak in clcdfb_of_vram_setup
- hyperv_fb: Allow resolutions with size > 64 MB for Gen1
- pxa3xx-gcu: release the resources correctly in
pxa3xx_gcu_probe/remove()
- omapfb: Prevent compiler warning regarding
hwa742_update_window_async()"
* tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Add prototype for hwa742_update_window_async()
video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
video: fbdev: radeon: Fix spelling typo in comment
video: fbdev: xen: remove setting of 'transp' parameter
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
video: fbdev: omapfb: simplify the return expression of nec_8048_connect()
video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data()
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
The symbol hwa742_update_window_async() is exported, but there is no
prototype defined for it. That's why gcc complains:
drivers-video-fbdev-omap-hwa742.c:warning:no-previous-prototype-for-hwa742_update_window_async
Add the prototype, but I wonder if we couldn't drop exporting the symbol
instead. Since omapfb_update_window_async() is exported the same way,
are there any users outside of the tree?
Signed-off-by: Helge Deller <deller@gmx.de>
Pull hyperv updates from Wei Liu:
- Harden hv_sock driver (Andrea Parri)
- Harden Hyper-V PCI driver (Andrea Parri)
- Fix multi-MSI for Hyper-V PCI driver (Jeffrey Hugo)
- Fix Hyper-V PCI to reduce boot time (Dexuan Cui)
- Remove code for long EOL'ed Hyper-V versions (Michael Kelley, Saurabh
Sengar)
- Fix balloon driver error handling (Shradha Gupta)
- Fix a typo in vmbus driver (Julia Lawall)
- Ignore vmbus IMC device (Michael Kelley)
- Add a new error message to Hyper-V DRM driver (Saurabh Sengar)
* tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (28 commits)
hv_balloon: Fix balloon_probe() and balloon_remove() error handling
scsi: storvsc: Removing Pre Win8 related logic
Drivers: hv: vmbus: fix typo in comment
PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit()
PCI: hv: Add validation for untrusted Hyper-V values
PCI: hv: Fix interrupt mapping for multi-MSI
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7
video: hyperv_fb: Remove support for Hyper-V 2008 and 2008R2/Win7
scsi: storvsc: Remove support for Hyper-V 2008 and 2008R2/Win7
Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7
x86/hyperv: Disable hardlockup detector by default in Hyper-V guests
drm/hyperv: Add error message for fb size greater than allocated
PCI: hv: Do not set PCI_COMMAND_MEMORY to reduce VM boot time
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
Drivers: hv: vmbus: Refactor the ring-buffer iterator functions
Drivers: hv: vmbus: Accept hv_sock offers in isolated guests
hv_sock: Add validation for untrusted Hyper-V values
hv_sock: Copy packets sent by Hyper-V out of the ring buffer
hv_sock: Check hv_pkt_iter_first_raw()'s return value
...
Commit b3c9a924aa ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather
than .remove") fixed a use-after-free error due the vesafb driver freeing
the fb_info in the .remove handler instead of doing it in .fb_destroy.
This can happen if the .fb_destroy callback is executed after the .remove
callback, since the former tries to access a pointer freed by the latter.
But that change didn't take into account that another possible scenario is
that .fb_destroy is called before the .remove callback. For example, if no
process has the fbdev chardev opened by the time the driver is removed.
If that's the case, fb_info will be freed when unregister_framebuffer() is
called, making the fb_info pointer accessed in vesafb_remove() after that
to no longer be valid.
To prevent that, move the expression containing the info->par to happen
before the unregister_framebuffer() function call.
Fixes: b3c9a924aa ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove")
Reported-by: Pascal Ernster <dri-devel@hardfalcon.net>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Pascal Ernster <dri-devel@hardfalcon.net>
Signed-off-by: Helge Deller <deller@gmx.de>
