After commit 21a59991ce ("scripts/package/Makefile: rpmbuild is needed
for rpm targets"), it is no longer possible to specify RPMOPTS.
For example, we can no longer able to control _topdir using the following
make command.
make RPMOPTS="--define '_topdir /home/xyz/workspace/'" binrpm-pkg
Fixes: 21a59991ce ("scripts/package/Makefile: rpmbuild is needed for rpm targets")
Cc: <stable@vger.kernel.org> # 4.3+
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The kernel headers package (linux-headers) doesn't include
header files from other architectures required to build
out-of-tree modules.
For e.g. on ARM64, opcodes.h includes the same file from ARM
which causes the following error:
./arch/arm64/include/asm/opcodes.h:1:43: fatal error:
../../arm/include/asm/opcodes.h: No such file or directory
compilation terminated.
Signed-off-by: Azriel Samson <asamson@codeaurora.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
"objtool" is required for building external m dules if "Compile-time
stack metadata validation" is enabled. Otherwise all builds based
on the headers package fail with:
make[1]: Entering directory '/usr/src/linux-headers-4.6.0-rc6'
make[2]: *** No rule to make target 'tools/objtool/objtool', needed by 'foo.o'. Stop.
Makefile:1598: recipe for target 'foo.ko' failed
make[1]: *** [foo.ko] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.6.0-rc6'
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Michal Marek <mmarek@suse.com>
When uninstalling kernel RPM, we're unconditionally calling
"new-kernel-pkg --remove". This is useless on systems which are based on
'update-bootloader' script instead.
Support update-bootloader removal method as well in case the script is
present; contrary to new-kernel-pkg, this needs to be done in %postun,
otherwise update-bootloader will refuse to remove entry for kernel for
which the binary still exists.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Michal Marek <mmarek@suse.com>
This patch add a rpm preuninstall scriptlet to cleanup the
boot loader configuration on kernel package uninstall.
The initrd for the to-be-removed kernel is deleted, too.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
mkspec is copying built kernel to temporrary location
/boot/vmlinuz-$KERNELRELEASE-rpm
and runs installkernel on it. This however directly leads to grub2
menuentry for this suffixed binary being generated as well during the run
of installkernel script.
Later in the process the temporary -rpm suffixed files are removed, and
therefore we end up with spurious (and non-functional) grub2 menu entries
for each installed kernel RPM.
Fix that by using a different temporary name (prefixed by '.'), so that
the binary is not recognized as an actual kernel binary and no menuentry
is created for it.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: 3c9c7a14b6 ("rpm-pkg: add %post section to create initramfs and grub hooks")
Signed-off-by: Michal Marek <mmarek@suse.com>
building with $srctree != $objtree, perf-tar-* targets fail
to read the MANIFEST file and add the PERF-VERSION-FILE needed
by out-of-tree builds. The build errors and an incorrect tar is created:
$ make O=build-x86 perf-targz-src-pkg
TAR
cat: ../tools/perf/MANIFEST: No such file or directory
tar: perf-4.1.0-rc8/PERF-VERSION-FILE: Cannot stat: No such file or
dir..
tar: Exiting with failure status due to previous errors
Kbuild sets objtree to "." and srctree to ".." The command to output
MANIFEST becomes:
$(cd ..; echo $(cat ../tools/perf/MANIFEST))
Without MANIFEST, the entire kernel source tree is added to the perf
source tarball. The *correct* fix is to keep the cd and remove srctree
from cat command line since MANIFEST has wildcards that fail to expand
working directory isn't srctree.
Second, PERF-VERSION-FILE gets not added, because in-tree build path is
hardcoded to Makefile:
util/PERF-VERSION-GEN ../../$(perf-tar)/ 2>/dev/null)
The PERF-VERSION-GEN needs to be run from tools/perf directory,
and the output directory needs to be changed from relative to
to absolute. This can be achieved using the $(CURDIR) variable.
Also remove the error redirect to /dev/null which hid the error.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Pull misc kbuild updates from Michal Marek:
"This is the non-critical part of kbuild:
- several coccinelle updates
- make deb-pkg creates an armhf package if CONFIG_VFP=y
- make tags understands some more powerpc macros"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
coccinelle: Improve checking for missing NULL terminators
coccinelle: ifnullfree: handle various destroy functions
coccinelle: ifnullfree: various cleanups
cocinelle: iterators: semantic patch to delete unneeded of_node_put
deb-pkg: Add automatic support for armhf architecture
scripts/coccinelle: fix typos
coccinelle: misc: remove "complex return code" warnings
Coccinelle: fix incorrect -include option transformation
coccinelle: tests: improve odd_ptr_err.cocci
coccinelle: misc: move constants to the right
scripts/tags.sh: Teach tags about some powerpc macros
The Debian armhf architecture uses the ARM EABI hard-float variant,
whereas armel uses the soft-float variant. Although the kernel
doesn't use FP itself, CONFIG_VFP must be enabled to support
hard-float userland and will probably be disabled when supporting a
soft-float userland. So set the architecture to armhf by default when
CONFIG_AEABI and CONFIG_VFP are both enabled.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Fathi Boudra <fathi.boudra@linaro.org>
Reviewed-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 3716001bcb ("deb-pkg: add source package") added the ability to
create a debian changelog file. This exposed that previously the
builddeb script hasn't cleared debian/files between builds.
As debian/files keeps accumulating entries, the changes file will end up
growing indefinelty. With outdated entries in debian/files, builddeb
script will exit with failure. This regression impacts those who use
"make deb-pkg" target to build kernel into a .deb package and never use
"make mrproper" or other means to clean kernel tree from generated
directories.
To fix the regression, remove debian/files before starting build and in
the generated clean rule.
Fixes: 3716001bcb ("deb-pkg: add source package")
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Michal Marek <mmarek@suse.cz>
Cc: maximilian attems <maks@stro.at>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make deb-pkg build both source and binary package like make rpm-pkg does.
For people who only need binary kernel package, there is now bindeb-pkg
target, same target also used to build the .deb files if built from the
source package using dpkg-buildpackage.
Generated source package will build the same kernel .config than what
was available for make deb-pkg. The name of the source package can
be set with KDEB_SOURCENAME enviroment variable.
The source package is useful for GPL compliance, or for feeding to a
automated debian package builder.
Cc: Chris J Arges <chris.j.arges@canonical.com>
Reviewed-by: maximilian attems <maks@stro.at>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Split source tarball creation from rpm-pkg target
so it can be used from deb-pkg target as well. As
added bonus, we can now pretty print TAR the name of
tarball created in quiet mode
This patch prepares the groundwork for deb-pkg source
package adding bit.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
I happened to build a kernel with "make deb-pkg" on a machine with no
network connectivity, but this failed with:
[...]
INSTALL debian/headertmp/usr/include/asm/ (65 files)
hostname: Name or service not known
../scripts/package/Makefile:90: recipe for target 'deb-pkg' failed
make[2]: *** [deb-pkg] Error 1
In scripts/package/builddeb it tries to construct an email address (that
can be queried in /proc/version later on) but with no network,
the "hostname -f" fails. The following patch falls back to just use the
shortname if we cannot determine our FQDN.
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Every package needs /usr/share/doc/$package_name and
DEBIAN directory, so create them as part of create_package
function.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Before rpm release 4.1, in 2002, either the rpm command or the
rpmbuild command could be used in the rpm-pkg or binrpm-pkg targets,
and the Makefile chose the rpm command if the rpmbuild command wasn't
found.
After release 4.1, however, the rpm command could no longer be used in
place of the rpmbuild command. As the rpmbuild command is not
installed by default, this can lead to failures with the rpm-pkg and
binrpm-pkg targets:
rpm --define "_builddir ." --target \
x86_64 -bb ./binkernel.spec
rpm --target: unknown option
scripts/package/Makefile:60: recipe for target 'binrpm-pkg' failed
Change the Makefile to use rpmbuild unconditionally to avoid this.
Signed-off-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When building a package with make deb-pkg (say, for arm), the dtb files are
not added to the package. Given that things are still evolving on arm, it
make sense to have them along with the kernel and modules.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If CONFIG_MODULE_SIG_ALL is set, then user expects that all modules are
automatically signed in the result package, as it's for rpm-pkg, binrpm-pkg,
tar, tar-*. For deb-pkg this is correct only if CONFIG_DEBUG_INFO
is NOT set. In that case deb-package contains signed modules.
But if CONFIG_DEBUG_INFO is set, builddeb creates separate package with
debug information. To do that, debug information from all modules
is copied into separate files by objcopy. And loadable kernel modules are
stripped afterwards. Stripping removes previously (during modules_install)
added signatures from loadable kernel modules. Therefore final deb-package
contains unsigned modules despite of set option CONFIG_MODULE_SIG_ALL.
This patch resigns all stripped modules if CONFIG_MODULE_SIG_ALL is set
to solve this problem.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
create_package() function tries to resolve used architecture
for everry package. Split the setting the architecture to a
new function, set_debarch(), called once on startup.
This allows using debarch from other parts of script as
needed.
v2: Follow Michals suggestion on setting variables at
top scope and also setting the fallback $debarch in the
new function
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
No need for the intermediary vmlinux.orig - bzip2 can keep the original
files used for compression with --keep.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
lsb_release command is a good choice to determine the distribution
name for the changelog file in the generated Debian packages [1].
Its installation is no precondition.
In Debian it is still not essential or build-essential.
Ben gave some helpful informations and detailed explanations in [2].
There he also suggested to have an option to explicitly set the
distribution name (see $KDEB_CHANGELOG_DIST variable).
Embedded the improvement as suggested by Thorsten (see [3]):
"This is suboptimal: if KDEB_CHANGELOG_DIST is defined,
lsb_release is not necessary. The following snippet
also omits using its output if it fails but still
produces any:"
Dealing with this issue I learned about "The Colon in the Shell." and
possible pitfalls in this area (see [4,5]). Furthermore, refreshed my
knowledge about redirecting outputs with the echo command (see [5]).
Special thanks to Thorsten, I enjoyed the IRC session with you.
Cooked together the snippets of Ben and Thorsten (see [2,3]).
Tested against Linux v3.19-rc2.
Thanks goes to Alexander, Ben, maximilian and Thorsten for the very
vital help.
[1] https://lkml.org/lkml/2012/4/23/516
[2] http://marc.info/?l=linux-kbuild&m=142022188322321&w=2
[3] http://marc.info/?l=linux-kbuild&m=142023476825460&w=2
[4] http://blog.brlink.eu/index.html#i70
[5] https://www.mirbsd.org/permalinks/wlog-10_e20141209-tg.htm
[6] http://stackoverflow.com/questions/23489934/echo-2-some-text-what-does-it-mean-in-shell-scripting
CC: Alexander Wirt <formorer@debian.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Suggested-by: Thorsten Glaser <tg@mirbsd.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
[ dileks: Reviewed his suggested diff in RFC v4 ]
Reviewed-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When doing make binrpm-pkg we only want to build the binary and header
package as the documentation of binrpm-pkg target claims. Hence this
patch avoid building the source and devel package. This makes binrpm-pkg
target lot faster and way more usefull.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
[mmarek: used subject line from v3]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull misc kbuild updates from Michal Marek:
"This is the less critical kbuild stuff for v3.18-rc1:
- make deb-pkg debuginfo fix, ppc64el support and warning fix for
recent dpkg tools
- make TAGS fixes
- new coccinelle patch
- kbuild documentation improvements"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
deb-pkg: remove obsolete -isp option to dpkg-gencontrol
coccinelle: misc: semantic patch to delete overly complex return code processing
deb-pkg: Add support for powerpc little endian
builddeb: put the dbg files into the correct directory
scripts/tags.sh: fix DEFINE_HASHTABLE in emacs case
scripts/tags.sh: remove *PCGFLAGS regular expressions
scripts/tags.sh: Don't specify kind-spec for emacs' ctags/etags
Documentation: kbuild: Improve grammar
Documentation: kbuild: Remove obsolete dtc_cpp section
Documentation: kbuild: Improve if_changed documentation
Documentation: kbuild: Remove obsolete include/asm symlink step
The -isp option has been deprecated, after it became the default
behaviour back in 2006.
Since dpkg 1.17.11, dpkg-gencontrol emits a warning on -isp usage.
References: https://bugs.debian.org/215233
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Signed-off-by: Michal Marek <mmarek@suse.cz>
