A missing compression utility or other errors were not picked up by make
and an empty kernel image was produced. By removing the &&, errors will
no longer be ignored.
Signed-off-by: Harald Seiler <hws@denx.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.
It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.
I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In my view, most of headers can be self-contained. So, it would be
tedious to add every header to header-test-y explicitly. We usually
end up with "all headers with some exceptions".
There are two types in exceptions:
[1] headers that are never compiled as standalone units
For examples, include/linux/compiler-gcc.h is not intended for
direct inclusion. We should always exclude such ones.
[2] headers that are conditionally compiled as standalone units
Some headers can be compiled only for particular architectures.
For example, include/linux/arm-cci.h can be compiled only for
arm/arm64 because it requires <asm/arm-cci.h> to exist.
Clang can compile include/soc/nps/mtm.h only for arc because
it contains an arch-specific register in inline assembler.
So, you can write Makefile like this:
header-test- += linux/compiler-gcc.h
header-test-$(CONFIG_ARM) += linux/arm-cci.h
header-test-$(CONFIG_ARM64) += linux/arm-cci.h
header-test-$(CONFIG_ARC) += soc/nps/mtm.h
The new syntax header-test-pattern-y will be useful to specify
"the rest".
The typical usage is like this:
header-test-pattern-y += */*.h
This will add all the headers in sub-directories to the test coverage,
excluding $(header-test-). In this regards, header-test-pattern-y
behaves like a weaker variant of header-test-y.
Caveat:
The patterns in header-test-pattern-y are prefixed with $(srctree)/$(src)/
but not $(objtree)/$(obj)/. Stale generated headers are often left over
when you traverse the git history without cleaning. Wildcard patterns for
$(objtree) may match to stale headers, which could fail to compile.
One pitfall is $(srctree)/$(src)/ and $(objtree)/$(obj)/ point to the
same directory for in-tree building. So, header-test-pattern-y should
be used with care since it can potentially match to stale headers.
Caveat2:
You could use wildcard for header-test-. For example,
header-test- += asm-generic/%
... will exclude headers in asm-generic directory. Unfortunately, the
wildcard character is '%' instead of '*' here because this is evaluated
by $(filter-out ...) whereas header-test-pattern-y is evaluated by
$(wildcard ...). This is a kludge, but seems useful in some places...
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
header-test-y does not work with headers in sub-directories.
For example, you may want to write a Makefile, like this:
include/linux/Kbuild:
header-test-y += mtd/nand.h
This entry will create a wrapper include/linux/mtd/nand.hdrtest.c
with the following content:
#include "mtd/nand.h"
To make this work, we need to add $(srctree)/include/linux to the
header search path. It would be tedious to add ccflags-y.
Instead, we could change the *.hdrtest.c rule to wrap:
#include "nand.h"
This works for in-tree build since #include "..." searches in the
relative path from the header with this directive. For O=... build,
we need to add $(srctree)/include/linux/mtd to the header search path,
which will be even more tedious.
After all, I thought it would be handier to compile headers directly
without creating wrappers.
I added a new build rule to compile %.h into %.h.s
The target is %.h.s instead of %.h.o because it is slightly faster.
Also, as for GCC, an empty assembly is smaller than an empty object.
I wrote the build rule:
$(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<
instead of:
$(CC) $(c_flags) -S -o $@ -x c $<
Both work fine with GCC, but the latter is bad for Clang.
This comes down to the difference in the -Wunused-function policy.
GCC does not warn about unused 'static inline' functions at all.
Clang does not warn about the ones in included headers, but does
about the ones in the source. So, we should handle headers as
headers, not as source files.
In fact, this has been hidden since commit abb2ea7dfd ("compiler,
clang: suppress warning for unused static inline functions"), but we
should not rely on that.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Sometimes it's useful to be able to explicitly ensure certain headers
remain self-contained, i.e. that they are compilable as standalone
units, by including and/or forward declaring everything they depend on.
Add special target header-test-y where individual Makefiles can add
headers to be tested if CONFIG_HEADER_TEST is enabled. This will
generate a dummy C file per header that gets built as part of extra-y.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'addtree' and 'flags' in scripts/Kbuild.include are so compilecated
and ugly.
As I mentioned in [1], Kbuild should stop automatic prefixing of header
search path options.
I fixed up (almost) all Makefiles in the kernel. Now 'addtree' and
'flags' have been removed.
Kbuild still caters to add $(srctree)/$(src) and $(objtree)/$(obj)
to the header search path for O= building, but never touches extra
compiler options from ccflags-y etc.
[1]: https://patchwork.kernel.org/patch/9632347/
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
KBUILD_SRC was conventionally used for some different purposes:
[1] To remember the source tree path
[2] As a flag to check if sub-make is already done
[3] As a flag to check if Kbuild runs out of tree
For [1], we do not need to remember it because the top Makefile
can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
[2] has been replaced with self-commenting 'sub_make_done'.
For [3], we can distinguish in-tree/out-of-tree by comparing
$(srctree) and '.'
This commit converts [3] to prepare for the KBUILD_SRC removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
scripts/Makefile.build and arch/s390/boot/Makefile use the same
command (thin archiving with symbol table creation).
Avoid the code duplication, and move it to scripts/Makefile.lib.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The commands surrounded by ( ) are executed in a subshell, but in
most cases, we do not need to spawn an extra subshell.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In Kbuild, if_changed and friends must have FORCE as a prerequisite.
Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.
Add real-prereqs as a shorthand.
Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
All the callers of size_append pass $(filter-out FORCE,$^).
Move $(filter-out FORCE,$^) to the definition of size_append.
This makes the callers cleaner because $(call ...) is unneeded
for a macro with no argument.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building an external module, $(obj) is the absolute path to it.
The header search paths from ccflags-y etc. should not be tweaked.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
filechk_* rules often consist of multiple 'echo' lines. They must be
surrounded with { } or ( ) to work correctly. Otherwise, only the
string from the last 'echo' would be written into the target.
Let's take care of that in the 'filechk' in scripts/Kbuild.include
to clean up filechk_* rules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special
target"), the target file is automatically deleted on failure.
The boilerplate code
... || { rm -f $@; false; }
is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 3a2429e1fa ("kbuild: change if_changed_rule for multi-line
recipe") and commit 4f0e3a57d6 ("kbuild: Add support for DT binding
schema checks") came in via different sub-systems.
This is a follow-up cleanup.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The only/last user of UIMAGE_IN/OUT was removed by commit 4722a3e6b7
("microblaze: fix multiple bugs in arch/microblaze/boot/Makefile").
The input and output should always be $< and $@.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.
Check DT binding schema documents:
make dt_binding_check
Build dts files and check using DT binding schema:
make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The updated version of dtc has a bug fix for simple_bus_reg warnings
and lots of warnings are generated now. So disable this warning by
default.
Signed-off-by: Rob Herring <robh@kernel.org>
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.
Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.
Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.
For some reason, LDFLAGS was not renamed.
Using a well-known variable like LDFLAGS may result in accidental
override of the variable.
Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.
I did not touch Makefiles under tools/ since the tools build system
is a different world.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
