Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
Pull slab fixes from Vlastimil Babka:
- Build fix (workaround) for clang.
- Fix a /proc/kcore based slabinfo script broken by struct slab changes
in 5.17-rc1.
* tag 'slab-for-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
tools/cgroup/slabinfo: update to work with struct slab
slab: remove __alloc_size attribute from __kmalloc_track_caller
These tests check that the basic locked port feature works, so that
no 'host' can communicate (ping) through a locked port unless the
MAC address of the 'host' interface is in the forwarding database of
the bridge.
Signed-off-by: Hans Schultz <schultz.hans+netdev@gmail.com>
Acked-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add a new bonding option ns_ip6_target, which correspond
to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS
request to determine the health of the link.
For other related options like the validation, we still use
arp_validate, and will change to ns_validate later.
Note: the sysfs configuration support was removed based on
https://lore.kernel.org/netdev/8863.1645071997@famine
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull mount_setattr test/doc fixes from Christian Brauner:
"This contains a fix for one of the selftests for the mount_setattr
syscall to create idmapped mounts, an entry for idmapped mounts for
maintainers, and missing kernel documentation for the helper we split
out some time ago to get and yield write access to a mount when
changing mount properties"
* tag 'fs.mount_setattr.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: add kernel doc for mnt_{hold,unhold}_writers()
MAINTAINERS: add entry for idmapped mounts
tests: fix idmapped mount_setattr test
Since commit 2843ff6f36 ("mptcp: remote addresses fullmesh"), an
MPTCP client can attempt creating multiple MPJ subflow simultaneusly.
In such scenario the server, when syncookies are enabled, could end-up
accepting incoming MPJ syn even above the configured subflow limit, as
the such limit can be enforced in a reliable way only after the subflow
creation. In case of syncookie, only after the 3rd ack reception.
As a consequence the related self-tests case sporadically fails, as it
verify that the server always accept the expected number of MPJ syn.
Address the issues relaxing the MPJ syn number constrain. Note that the
check on the accepted number of MPJ 3rd ack still remains intact.
Fixes: 2843ff6f36 ("mptcp: remote addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.
In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.
The output looks like this:
ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ]
server got 1 data checksum error[s]
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To allow showing the 'help' menu even if these tools are not available.
While at it, also avoid launching the command then checking $?. Instead,
the check is directly done in the 'if'.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tmp files will only be created when a test will be launched.
This avoid 'dd' output when '-h' is used for example.
While at it, also avoid creating netns that will be removed when
starting the first test.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shellcheck found that these variables were set but never used.
Note that rndh is no longer prefixed with '0-' but it doesn't change
anything.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch simplified pm_nl_change_endpoint(), using id-based address
lookups only. And dropped the fragile way of parsing 'addr' and 'id'
from the output of pm_nl_show_endpoints().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the increase number of tests, one CI instance, using a debug kernel
config and not recent hardware, takes around 10 minutes to execute the
slowest MPTCP test: mptcp_join.sh.
Even if most CIs don't take that long to execute these tests --
typically max 10 minutes to run all selftests -- it will help some of
them if the timeout is increased.
The timeout could be disabled but it is always good to have an extra
safeguard, just in case.
Please note that on slow public CIs with kernel debug settings, it has
been observed it can easily take up to 45 minutes to execute all tests
in this very slow environment with other jobs running in parallel.
The slowest test, mptcp_join.sh takes ~30 minutes in this case.
In such environments, the selftests timeout set in the 'settings' file
is disabled because this environment is known as being exceptionnally
slow. It has been decided not to take such exceptional environments into
account and set the timeout to 20min.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2022-02-17
We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).
The main changes are:
1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)
2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.
3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.
4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.
5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.
6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.
7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.
8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.
9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.
10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================
Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull Kselftest fixes from Shuah Khan:
"Fixes to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests"
* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
selftests/seccomp: Fix seccomp failure by adding missing headers
selftests/exec: Add non-regular to TEST_GEN_PROGS
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
