Currently blk-mq does not report any event when two requests get merged
in the elevator. This then results in difficult to understand sequence
of events like:
...
8,0 34 1579 0.608765271 2718 I WS 215023504 + 40 [dbench]
8,0 34 1584 0.609184613 2719 A WS 215023544 + 56 <- (8,4) 2160568
8,0 34 1585 0.609184850 2719 Q WS 215023544 + 56 [dbench]
8,0 34 1586 0.609188524 2719 G WS 215023544 + 56 [dbench]
8,0 3 602 0.609684162 773 D WS 215023504 + 96 [kworker/3:1H]
8,0 34 1591 0.609843593 0 C WS 215023504 + 96 [0]
and you can only guess (after quite some headscratching since the above
excerpt is intermixed with a lot of other IO) that request 215023544+56
got merged to request 215023504+40. Provide proper event for request
merging like we used to do in the legacy block layer.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We were only creating the request_queue debugfs_dir only
for make_request block drivers (multiqueue), but never for
request-based block drivers. We did this as we were only
creating non-blktrace additional debugfs files on that directory
for make_request drivers. However, since blktrace *always* creates
that directory anyway, we special-case the use of that directory
on blktrace. Other than this being an eye-sore, this exposes
request-based block drivers to the same debugfs fragile
race that used to exist with make_request block drivers
where if we start adding files onto that directory we can later
run a race with a double removal of dentries on the directory
if we don't deal with this carefully on blktrace.
Instead, just simplify things by always creating the request_queue
debugfs_dir on request_queue registration. Rename the mutex also to
reflect the fact that this is used outside of the blktrace context.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We make an assumption that a debugfs directory exists, but since
this can fail ensure it exists before allowing blktrace setup to
complete. Otherwise we end up stuffing blktrace files on the debugfs
root directory. In the worst case scenario this *in theory* can create
an eventual panic *iff* in the future a similarly named file is created
prior on the debugfs root directory. This theoretical crash can happen
due to a recursive removal followed by a specific dentry removal.
This doesn't fix any known crash, however I have seen the files
go into the main debugfs root directory in cases where the debugfs
directory was not created due to other internal bugs with blktrace
now fixed.
blktrace is also completely useless without this directory, so
this ensures to userspace we only setup blktrace if the kernel
can stuff files where they are supposed to go into.
debugfs directory creations typically aren't checked for, and we have
maintainers doing sweep removals of these checks, but since we need this
check to ensure proper userspace blktrace functionality we make sure
to annotate the justification for the check.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On commit 6ac93117ab ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace while racing to remove / add a device.
We used to use asynchronous removal of the request_queue, and with that
the issue was easier to reproduce. Now that we have reverted to
synchronous removal of the request_queue, the issue is still possible to
reproduce, its however just a bit more difficult.
We essentially run two instances of break-blktrace which add/remove
a loop device, and setup a blktrace and just never tear the blktrace
down. We do this twice in parallel. This is easily reproduced with the
script run_0004.sh from break-blktrace [0].
We can end up with two types of panics each reflecting where we
race, one a failed blktrace setup:
[ 252.426751] debugfs: Directory 'loop0' with parent 'block' already present!
[ 252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 252.436592] #PF: supervisor write access in kernel mode
[ 252.439822] #PF: error_code(0x0002) - not-present page
[ 252.442967] PGD 0 P4D 0
[ 252.444656] Oops: 0002 [#1] SMP NOPTI
[ 252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164
[ 252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 252.456343] RIP: 0010:down_write+0x15/0x40
[ 252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89
45 08 5d
[ 252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246
[ 252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000
[ 252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[ 252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001
[ 252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000
[ 252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0
[ 252.473346] FS: 00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000
[ 252.475225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0
[ 252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 252.479866] Call Trace:
[ 252.480322] simple_recursive_removal+0x4e/0x2e0
[ 252.481078] ? debugfs_remove+0x60/0x60
[ 252.481725] ? relay_destroy_buf+0x77/0xb0
[ 252.482662] debugfs_remove+0x40/0x60
[ 252.483518] blk_remove_buf_file_callback+0x5/0x10
[ 252.484328] relay_close_buf+0x2e/0x60
[ 252.484930] relay_open+0x1ce/0x2c0
[ 252.485520] do_blk_trace_setup+0x14f/0x2b0
[ 252.486187] __blk_trace_setup+0x54/0xb0
[ 252.486803] blk_trace_ioctl+0x90/0x140
[ 252.487423] ? do_sys_openat2+0x1ab/0x2d0
[ 252.488053] blkdev_ioctl+0x4d/0x260
[ 252.488636] block_ioctl+0x39/0x40
[ 252.489139] ksys_ioctl+0x87/0xc0
[ 252.489675] __x64_sys_ioctl+0x16/0x20
[ 252.490380] do_syscall_64+0x52/0x180
[ 252.491032] entry_SYSCALL_64_after_hwframe+0x44/0xa9
And the other on the device removal:
[ 128.528940] debugfs: Directory 'loop0' with parent 'block' already present!
[ 128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[ 128.619537] #PF: supervisor write access in kernel mode
[ 128.622700] #PF: error_code(0x0002) - not-present page
[ 128.625842] PGD 0 P4D 0
[ 128.627585] Oops: 0002 [#1] SMP NOPTI
[ 128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G E 5.7.0-rc2-next-20200420+ #164
[ 128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 128.640471] RIP: 0010:down_write+0x15/0x40
[ 128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89
45 08 5d
[ 128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246
[ 128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000
[ 128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[ 128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0
[ 128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000
[ 128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0
[ 128.660500] FS: 00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000
[ 128.662204] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0
[ 128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 128.667282] Call Trace:
[ 128.667801] simple_recursive_removal+0x4e/0x2e0
[ 128.668663] ? debugfs_remove+0x60/0x60
[ 128.669368] debugfs_remove+0x40/0x60
[ 128.669985] blk_trace_free+0xd/0x50
[ 128.670593] __blk_trace_remove+0x27/0x40
[ 128.671274] blk_trace_shutdown+0x30/0x40
[ 128.671935] blk_release_queue+0x95/0xf0
[ 128.672589] kobject_put+0xa5/0x1b0
[ 128.673188] disk_release+0xa2/0xc0
[ 128.673786] device_release+0x28/0x80
[ 128.674376] kobject_put+0xa5/0x1b0
[ 128.674915] loop_remove+0x39/0x50 [loop]
[ 128.675511] loop_control_ioctl+0x113/0x130 [loop]
[ 128.676199] ksys_ioctl+0x87/0xc0
[ 128.676708] __x64_sys_ioctl+0x16/0x20
[ 128.677274] do_syscall_64+0x52/0x180
[ 128.677823] entry_SYSCALL_64_after_hwframe+0x44/0xa9
The common theme here is:
debugfs: Directory 'loop0' with parent 'block' already present
This crash happens because of how blktrace uses the debugfs directory
where it places its files. Upon init we always create the same directory
which would be needed by blktrace but we only do this for make_request
drivers (multiqueue) block drivers. When you race a removal of these
devices with a blktrace setup you end up in a situation where the
make_request recursive debugfs removal will sweep away the blktrace
files and then later blktrace will also try to remove individual
dentries which are already NULL. The inverse is also possible and hence
the two types of use after frees.
We don't create the block debugfs directory on init for these types of
block devices:
* request-based block driver block devices
* every possible partition
* scsi-generic
And so, this race should in theory only be possible with make_request
drivers.
We can fix the UAF by simply re-using the debugfs directory for
make_request drivers (multiqueue) and only creating the ephemeral
directory for the other type of block devices. The new clarifications
on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace
*prior* to processing a blktrace ensures the debugfs directories are
only created if no possible directory name clashes are possible.
This goes tested with:
o nvme partitions
o ISCSI with tgt, and blktracing against scsi-generic with:
o block
o tape
o cdrom
o media changer
o blktests
This patch is part of the work which disputes the severity of
CVE-2019-19770 which shows this issue is not a core debugfs issue, but
a misuse of debugfs within blktace.
Fixes: 6ac93117ab ("blktrace: use existing disk debugfs directory")
Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mostly for historical reasons, q->blk_trace is assigned through xchg()
and cmpxchg() atomic operations. Although this is correct, sparse
complains about this because it violates rcu annotations since commit
c780e86dd4 ("blktrace: Protect q->blk_trace with RCU") which started
to use rcu for accessing q->blk_trace. Furthermore there's no real need
for atomic operations anymore since all changes to q->blk_trace happen
under q->blk_trace_mutex and since it also makes more sense to check if
q->blk_trace is set with the mutex held earlier.
So let's just replace xchg() with rcu_replace_pointer() and cmpxchg()
with explicit check and rcu_assign_pointer(). This makes the code more
efficient and sparse happy.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use one blktrace per request_queue, that means one per the entire
disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1,
or just two calls on /dev/vda.
We check for concurrent setup only at the very end of the blktrace setup though.
If we try to run two concurrent blktraces on the same block device the
second one will fail, and the first one seems to go on. However when
one tries to kill the first one one will see things like this:
The kernel will show these:
```
debugfs: File 'dropped' in directory 'nvme1n1' already present!
debugfs: File 'msg' in directory 'nvme1n1' already present!
debugfs: File 'trace0' in directory 'nvme1n1' already present!
``
And userspace just sees this error message for the second call:
```
blktrace /dev/nvme1n1
BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error
```
The first userspace process #1 will also claim that the files
were taken underneath their nose as well. The files are taken
away form the first process given that when the second blktrace
fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN.
This means that even if go-happy process #1 is waiting for blktrace
data, we *have* been asked to take teardown the blktrace.
This can easily be reproduced with break-blktrace [0] run_0005.sh test.
Just break out early if we know we're already going to fail, this will
prevent trying to create the files all over again, which we know still
exist.
[0] https://github.com/mcgrof/break-blktrace
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function blk_log_remap() can be simplified by removing the
call to get_pdu_remap() that copies the values into extra variable to
print the data, which also fixes the endiannness warning reported by
sparse.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In function get_pdu_len() replace variable type from __u64 to
__be64. This fixes sparse warning.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In blk_add_trace_spliti() blk_add_trace_bio_remap() use
blk_status_to_errno() to pass the error instead of pasing the bi_status.
This fixes the sparse warning.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The status can be trivially derived from the bio itself. That also avoid
callers like NVMe to incorrectly pass a blk_status_t instead of the errno,
and the overhead of translating the blk_status_t to the errno in the I/O
completion fast path when no tracing is enabled.
Fixes: 35fe0d12c8 ("nvme: trace bio completion")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently informational messages within block trace do not have PID
information of the process reporting the message included. With BFQ it
is sometimes useful to have the information and there's no good reason
to omit the information from the trace. So just fill in pid information
when generating note message.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.
However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:
Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.
```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898 ret = 0;
1899 if (bt == NULL)
1900 ret = blk_trace_setup_queue(q, bdev);
1901
1902 if (ret == 0) {
1903 if (attr == &dev_attr_act_mask)
>>> CID 1460458: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "bt".
1904 bt->act_mask = value;
1905 else if (attr == &dev_attr_pid)
1906 bt->pid = value;
1907 else if (attr == &dev_attr_start_lba)
1908 bt->start_lba = value;
1909 else if (attr == &dev_attr_end_lba)
```
Added a reassignment with RCU annotation to fix the issue.
Fixes: c780e86dd4 ("blktrace: Protect q->blk_trace with RCU")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
CC: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Tristan Madani <tristmd@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As there's two struct ring_buffers in the kernel, it causes some confusion.
The other one being the perf ring buffer. It was agreed upon that as neither
of the ring buffers are generic enough to be used globally, they should be
renamed as:
perf's ring_buffer -> perf_buffer
ftrace's ring_buffer -> trace_buffer
This implements the changes to the ring buffer that ftrace uses.
Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As we are working to remove the generic "ring_buffer" name that is used by
both tracing and perf, the ring_buffer name for tracing will be renamed to
trace_buffer, and perf's ring buffer will be renamed to perf_buffer.
As there already exists a trace_buffer that is used by the trace_arrays, it
needs to be first renamed to array_buffer.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
cgroup ID is currently allocated using a dedicated per-hierarchy idr
and used internally and exposed through tracepoints and bpf. This is
confusing because there are tracepoints and other interfaces which use
the cgroupfs ino as IDs.
The preceding changes made kn->id exposed as ino as 64bit ino on
supported archs or ino+gen (low 32bits as ino, high gen). There's no
reason for cgroup to use different IDs. The kernfs IDs are unique and
userland can easily discover them and map them back to paths using
standard file operations.
This patch replaces cgroup IDs with kernfs IDs.
* cgroup_id() is added and all cgroup ID users are converted to use it.
* kernfs_node creation is moved to earlier during cgroup init so that
cgroup_id() is available during init.
* While at it, s/cgroup/cgrp/ in psi helpers for consistency.
* Fallback ID value is changed to 1 to be consistent with root cgroup
ID.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Each kernfs_node is identified with a 64bit ID. The low 32bit is
exposed as ino and the high gen. While this already allows using inos
as keys by looking up with wildcard generation number of 0, it's
adding unnecessary complications for 64bit ino archs which can
directly use kernfs_node IDs as inos to uniquely identify each cgroup
instance.
This patch exposes IDs directly as inos on 64bit ino archs. The
conversion is mostly straight-forward.
* 32bit ino archs behave the same as before. 64bit ino archs now use
the whole 64bit ID as ino and the generation number is fixed at 1.
* 64bit inos still use the same idr allocator which gurantees that the
lower 32bits identify the current live instance uniquely and the
high 32bits are incremented whenever the low bits wrap. As the
upper 32bits are no longer used as gen and we don't wanna start ino
allocation with 33rd bit set, the initial value for highbits
allocation is changed to 0 on 64bit ino archs.
* blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify
the issuing cgroup. Userland builds FILEID_INO32_GEN fids from
these numbers to look up the cgroups. To remain compatible with the
behavior, always output (LOW32,HIGH32) which will be constructed
back to the original 64bit ID by __kernfs_fh_to_dentry().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
kernfs_node->id is currently a union kernfs_node_id which represents
either a 32bit (ino, gen) pair or u64 value. I can't see much value
in the usage of the union - all that's needed is a 64bit ID which the
current code is already limited to. Using a union makes the code
unnecessarily complicated and prevents using 64bit ino without adding
practical benefits.
This patch drops union kernfs_node_id and makes kernfs_node->id a u64.
ino is stored in the lower 32bits and gen upper. Accessors -
kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the
ino and gen. This simplifies ID handling less cumbersome and will
allow using 64bit inos on supported archs.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexei Starovoitov <ast@kernel.org>
There is a plan to build the kernel with -Wimplicit-fallthrough and
this place in the code produced a warning (W=1).
This commit remove the following warning:
kernel/trace/blktrace.c:725:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prior patches ensured that any bio that interacts with a request_queue
is properly associated with a blkg. This makes bio->bi_css unnecessary
as blkg maintains a reference to blkcg already.
This removes the bio field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prior patches ensured that all bios are now associated with some blkg.
This now makes bio->bi_css unnecessary as blkg maintains a reference to
the blkcg already.
This patch removes the field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more block updates from Jens Axboe:
- Set of bcache fixes and changes (Coly)
- The flush warn fix (me)
- Small series of BFQ fixes (Paolo)
- wbt hang fix (Ming)
- blktrace fix (Steven)
- blk-mq hardware queue count update fix (Jianchao)
- Various little fixes
* tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits)
block/DAC960.c: make some arrays static const, shrinks object size
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
blk-mq: init hctx sched after update ctx and hctx mapping
block: remove duplicate initialization
tracing/blktrace: Fix to allow setting same value
pktcdvd: fix setting of 'ret' error return for a few cases
block: change return type to bool
block, bfq: return nbytes and not zero from struct cftype .write() method
block, bfq: improve code of bfq_bfqq_charge_time
block, bfq: reduce write overcharge
block, bfq: always update the budget of an entity when needed
block, bfq: readd missing reset of parent-entity service
blk-wbt: fix IO hang in wbt_wait()
block: don't warn for flush on read-only device
bcache: add the missing comments for smp_mb()/smp_wmb()
bcache: remove unnecessary space before ioctl function pointer arguments
bcache: add missing SPDX header
bcache: move open brace at end of function definitions to next line
bcache: add static const prefix to char * array declarations
bcache: fix code comments style
...
