Introduce a mechanism that performs an handshake between the userspace
provider and kernel driver which verifies that the user supports all
required features in order to operate correctly.
The handshake verifies the needed functionality by comparing the reported
device caps and the provider caps. If the device reports a non-zero
capability the appropriate comp mask is required from the userspace
provider in order to allocate the context.
Link: https://lore.kernel.org/r/20200722140312.3651-4-galpress@amazon.com
Reviewed-by: Shadi Ammouri <sammouri@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
User space should receive the maximum edpm size from kernel driver,
similar to other edpm/ldpm related limits. Add an additional parameter to
the alloc_ucontext_resp structure for the edpm maximum size.
In addition, pass an indication from user-space to kernel
(and not just kernel to user) that the DPM sizes are supported.
This is for supporting backward-forward compatibility between driver and
lib for everything related to DPM transaction and limit sizes.
This should have been part of commit mentioned in Fixes tag.
Link: https://lore.kernel.org/r/20200707063100.3811-3-michal.kalderon@marvell.com
Fixes: 93a3d05f9d ("RDMA/qedr: Add kernel capability flags for dpm enabled mode")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In older FW versions the completion flag was treated as the ack flag in
edpm messages. commit ff937b916e ("qed: Add EDPM mode type for user-fw
compatibility") exposed the FW option of setting which mode the QP is in
by adding a flag to the qedr <-> qed API.
This patch adds the qedr <-> libqedr interface so that the libqedr can set
the flag appropriately and qedr can pass it down to FW. Flag is added for
backward compatibility with libqedr.
For older libs, this flag didn't exist and therefore set to zero.
Fixes: ac1b36e55a ("qedr: Add support for user context verbs")
Link: https://lore.kernel.org/r/20200707063100.3811-2-michal.kalderon@marvell.com
Signed-off-by: Yuval Bason <yuval.bason@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
With the "PID" category QPs have same PID will be bound to same counter;
If this category is not set then QPs have different PIDs will be bound
to same counter.
This is implemented for 2 reasons:
1. The counter is a limited resource, while there may be dozens of
applications, each of which creates several types of QPs, which means
it may doesn't have enough counter.
2. The system administrator needs all QPs created by all applications
with same type bound to one counter.
The counter name and PID is only make sense when "PID" category are
configured.
This category can also be used in combine with others, e.g. QP type.
Link: https://lore.kernel.org/r/20200702082933.424537-2-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to get resource dump in raw format. It enable drivers to
return the entire device specific QP/CQ/MR context without a need from the
driver to set each field separately.
The raw query returns only the device specific data, general data is still
returned by using the existing queries.
Example:
$ rdma res show mr dev mlx5_1 mrn 2 -r -j
[{"ifindex":7,"ifname":"mlx5_1",
"data":[0,4,255,254,0,0,0,0,0,0,0,0,16,28,0,216,...]}]
Link: https://lore.kernel.org/r/20200623113043.1228482-9-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
The most common way to set ECE option will be during modify QP command in
INIT2RTR, RTR2RTS and RTS2RTS stages, so update mlx5 to support it.
The new bit in the comp_mask is needed to mark that kernel supports ECE
and can receive data instead of "reserved" field in the struct
mlx5_ib_modify_qp.
Link: https://lore.kernel.org/r/20200526115440.205922-8-leon@kernel.org
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IBTA declares "vendor option not supported" reject reason in REJ messages
if passive side doesn't want to accept proposed ECE options.
Due to the fact that ECE is managed by userspace, there is a need to let
users to provide such rejected reason.
Link: https://lore.kernel.org/r/20200526103304.196371-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The rdma_accept() is called by both passive and active sides of CMID
connection to mark readiness to start data transfer. For passive side,
this is called explicitly, for active side, it is called implicitly while
receiving REP message.
Provide ECE data to rdma_accept function needed for passive side to send
that REP message.
Link: https://lore.kernel.org/r/20200526103304.196371-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Passive side of CMID connection receives ECE request through REQ message
and needs to respond with relevant REP message which will be forwarded to
active side.
The UCMA events interface is responsible for such communication with the
user space (librdmacm). Extend it to provide ECE wire data.
Link: https://lore.kernel.org/r/20200526103304.196371-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
