Pull fuse updates from Miklos Szeredi:
- Fix a rare deadlock in virtiofs
- Fix st_blocks in writeback cache mode
- Fix wrong checks in splice move causing spurious warnings
- Fix a race between a GETATTR request and a FUSE_NOTIFY_INVAL_INODE
notification
- Use rb-tree instead of linear search for pages currently under
writeout by userspace
- Fix copy_file_range() inconsistencies
* tag 'fuse-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: copy_file_range should truncate cache
fuse: fix copy_file_range cache issues
fuse: optimize writepages search
fuse: update attr_version counter on fuse_notify_inval_inode()
fuse: don't check refcount after stealing page
fuse: fix weird page warning
fuse: use dump_page
virtiofs: do not use fuse_fill_super_common() for device installation
fuse: always allow query of st_dev
fuse: always flush dirty data on close(2)
fuse: invalidate inode attr in writeback cache mode
fuse: Update stale comment in queue_interrupt()
fuse: BUG_ON correction in fuse_dev_splice_write()
virtiofs: Add mount option and atime behavior to the doc
virtiofs: schedule blocking async replies in separate worker
Merge more updates from Andrew Morton:
"More mm/ work, plenty more to come
Subsystems affected by this patch series: slub, memcg, gup, kasan,
pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
thp, mmap, kconfig"
* akpm: (131 commits)
arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
riscv: support DEBUG_WX
mm: add DEBUG_WX support
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
powerpc/mm: drop platform defined pmd_mknotpresent()
mm: thp: don't need to drain lru cache when splitting and mlocking THP
hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
sparc32: register memory occupied by kernel as memblock.memory
include/linux/memblock.h: fix minor typo and unclear comment
mm, mempolicy: fix up gup usage in lookup_node
tools/vm/page_owner_sort.c: filter out unneeded line
mm: swap: memcg: fix memcg stats for huge pages
mm: swap: fix vmstats for huge pages
mm: vmscan: limit the range of LRU type balancing
mm: vmscan: reclaim writepage is IO cost
mm: vmscan: determine anon/file pressure balance at the reclaim root
mm: balance LRU lists based on relative thrashing
mm: only count actual rotations as LRU reclaim cost
...
They're the same function, and for the purpose of all callers they are
equivalent to lru_cache_add().
[akpm@linux-foundation.org: fix it for local_lock changes]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-5-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
And replace the arcane return value convention with a simple bool
where true means success and false means failure.
[AV: braino fix folded in]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
page_count() is unstable. Unless there has been an RCU grace period
between when the page was removed from the page cache and now, a
speculative reference may exist from the page cache.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When PageWaiters was added, updating this check was missed.
Reported-by: Nikolaus Rath <Nikolaus@rath.org>
Reported-by: Hugh Dickins <hughd@google.com>
Fixes: 6290602709 ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of custom page dumping, use the standard helper.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
commit 9635453572 ("fuse: reduce allocation size for splice_write")
changed size of bufs array, so BUG_ON which checks the index of the array
shold also be fixed.
[SzM: turn BUG_ON into WARN_ON]
Fixes: 9635453572 ("fuse: reduce allocation size for splice_write")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Normal, synchronous requests will have their args allocated on the stack.
After the FR_FINISHED bit is set by receiving the reply from the userspace
fuse server, the originating task may return and reuse the stack frame,
resulting in an Oops if the args structure is dereferenced.
Fix by setting a flag in the request itself upon initializing, indicating
whether it has an asynchronous ->end() callback.
Reported-by: Kyle Sanderson <kyle.leet@gmail.com>
Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch>
Fixes: 2b319d1f6f ("fuse: don't dereference req->args on finished request")
Cc: <stable@vger.kernel.org> # v5.4
Tested-by: Michael Stapelberg <michael+lkml@stapelberg.ch>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fix the iteration end check in fuse_dev_splice_write(). The iterator
position can only be compared with == or != since wrappage may be involved.
Fixes: 8cefc107ca ("pipe: Use head and tail pointers for the ring, not cursor and length")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
fs/compat_ioctl.c, which still has a couple of commands that need
support for time64_t.
In completely unrelated work, I spent time on cleaning up parts of
this file in the past, moving things out into drivers instead.
After Al Viro reviewed an earlier version of this series and did a lot
more of that cleanup, I decided to try to completely eliminate the
rest of it and move it all into drivers.
This series incorporates some of Al's work and many patches of my own,
but in the end stops short of actually removing the last part, which
is the scsi ioctl handlers. I have patches for those as well, but they
need more testing or possibly a rewrite"
* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
scsi: sd: enable compat ioctls for sed-opal
pktcdvd: add compat_ioctl handler
compat_ioctl: move SG_GET_REQUEST_TABLE handling
compat_ioctl: ppp: move simple commands into ppp_generic.c
compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
compat_ioctl: unify copy-in of ppp filters
tty: handle compat PPP ioctls
compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
compat_ioctl: handle SIOCOUTQNSD
af_unix: add compat_ioctl support
compat_ioctl: reimplement SG_IO handling
compat_ioctl: move WDIOC handling into wdt drivers
fs: compat_ioctl: move FITRIM emulation into file systems
gfs2: add compat_ioctl support
compat_ioctl: remove unused convert_in_user macro
compat_ioctl: remove last RAID handling code
compat_ioctl: remove /dev/raw ioctl translation
compat_ioctl: remove PCI ioctl translation
compat_ioctl: remove joystick ioctl translation
...
Pull pipe rework from David Howells:
"This is my set of preparatory patches for building a general
notification queue on top of pipes. It makes a number of significant
changes:
- It removes the nr_exclusive argument from __wake_up_sync_key() as
this is always 1. This prepares for the next step:
- Adds wake_up_interruptible_sync_poll_locked() so that poll can be
woken up from a function that's holding the poll waitqueue
spinlock.
- Change the pipe buffer ring to be managed in terms of unbounded
head and tail indices rather than bounded index and length. This
means that reading the pipe only needs to modify one index, not
two.
- A selection of helper functions are provided to query the state of
the pipe buffer, plus a couple to apply updates to the pipe
indices.
- The pipe ring is allowed to have kernel-reserved slots. This allows
many notification messages to be spliced in by the kernel without
allowing userspace to pin too many pages if it writes to the same
pipe.
- Advance the head and tail indices inside the pipe waitqueue lock
and use wake_up_interruptible_sync_poll_locked() to poke poll
without having to take the lock twice.
- Rearrange pipe_write() to preallocate the buffer it is going to
write into and then drop the spinlock. This allows kernel
notifications to then be added the ring whilst it is filling the
buffer it allocated. The read side is stalled because the pipe
mutex is still held.
- Don't wake up readers on a pipe if there was already data in it
when we added more.
- Don't wake up writers on a pipe if the ring wasn't full before we
removed a buffer"
* tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
pipe: Remove sync on wake_ups
pipe: Increase the writer-wakeup threshold to reduce context-switch count
pipe: Check for ring full inside of the spinlock in pipe_write()
pipe: Remove redundant wakeup from pipe_write()
pipe: Rearrange sequence in pipe_write() to preallocate slot
pipe: Conditionalise wakeup in pipe_read()
pipe: Advance tail pointer inside of wait spinlock in pipe_read()
pipe: Allow pipes to have kernel-reserved slots
pipe: Use head and tail pointers for the ring, not cursor and length
Add wake_up_interruptible_sync_poll_locked()
Remove the nr_exclusive argument from __wake_up_sync_key()
pipe: Reduce #inclusion of pipe_fs_i.h
Split pipe->ring_size into two numbers:
(1) pipe->ring_size - indicates the hard size of the pipe ring.
(2) pipe->max_usage - indicates the maximum number of pipe ring slots that
userspace orchestrated events can fill.
This allows for a pipe that is both writable by the general kernel
notification facility and by userspace, allowing plenty of ring space for
notifications to be added whilst preventing userspace from being able to
pin too much unswappable kernel space.
Signed-off-by: David Howells <dhowells@redhat.com>
Convert pipes to use head and tail pointers for the buffer ring rather than
pointer and length as the latter requires two atomic ops to update (or a
combined op) whereas the former only requires one.
(1) The head pointer is the point at which production occurs and points to
the slot in which the next buffer will be placed. This is equivalent
to pipe->curbuf + pipe->nrbufs.
The head pointer belongs to the write-side.
(2) The tail pointer is the point at which consumption occurs. It points
to the next slot to be consumed. This is equivalent to pipe->curbuf.
The tail pointer belongs to the read-side.
(3) head and tail are allowed to run to UINT_MAX and wrap naturally. They
are only masked off when the array is being accessed, e.g.:
pipe->bufs[head & mask]
This means that it is not necessary to have a dead slot in the ring as
head == tail isn't ambiguous.
(4) The ring is empty if "head == tail".
A helper, pipe_empty(), is provided for this.
(5) The occupancy of the ring is "head - tail".
A helper, pipe_occupancy(), is provided for this.
(6) The number of free slots in the ring is "pipe->ring_size - occupancy".
A helper, pipe_space_for_user() is provided to indicate how many slots
userspace may use.
(7) The ring is full if "head - tail >= pipe->ring_size".
A helper, pipe_full(), is provided for this.
Signed-off-by: David Howells <dhowells@redhat.com>
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix sparse warning:
fs/fuse/dev.c:468:6: warning: symbol 'fuse_args_to_req' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Fixes: 68583165f9 ("fuse: add pages to fuse_args")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This function has been made static, which now causes a compile-time
warning:
WARNING: "fuse_put_request" [vmlinux] is a static EXPORT_SYMBOL_GPL
Remove the unneeded export.
Fixes: 66abc3599c ("fuse: unexport request ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As of now fuse_dev_alloc() both allocates a fuse device and installs it in
fuse_conn list. fuse_dev_alloc() can fail if fuse_device allocation fails.
virtio-fs needs to initialize multiple fuse devices (one per virtio queue).
It initializes one fuse device as part of call to fuse_fill_super_common()
and rest of the devices are allocated and installed after that.
But, we can't afford to fail after calling fuse_fill_super_common() as we
don't have a way to undo all the actions done by fuse_fill_super_common().
So to avoid failures after the call to fuse_fill_super_common(),
pre-allocate all fuse devices early and install them into fuse connection
later.
This patch provides two separate helpers for fuse device allocation and
fuse device installation in fuse_conn.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The /dev/fuse device uses fiq->waitq and fasync to signal that requests are
available. These mechanisms do not apply to virtio-fs. This patch
introduces callbacks so alternative behavior can be used.
Note that queue_interrupt() changes along these lines:
spin_lock(&fiq->waitq.lock);
wake_up_locked(&fiq->waitq);
+ kill_fasync(&fiq->fasync, SIGIO, POLL_IN);
spin_unlock(&fiq->waitq.lock);
- kill_fasync(&fiq->fasync, SIGIO, POLL_IN);
Since queue_request() and queue_forget() also call kill_fasync() inside
the spinlock this should be safe.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
File systems like virtio-fs need to do not have to play directly with
forget list data structures. There is a helper function use that instead.
Rename dequeue_forget() to fuse_dequeue_forget() and export it so that
stacked filesystems can use it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
virtio-fs will need unique IDs for FORGET requests from outside
fs/fuse/dev.c. Make the symbol visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
