MediaFailure and VolumeDirty should be retained if these are set before
mounting.
In '3.1.13.3 Media Failure Field' of exfat specification describe:
If, upon mounting a volume, the value of this field is 1,
implementations which scan the entire volume for media failures and
record all failures as "bad" clusters in the FAT (or otherwise resolve
media failures) may clear the value of this field to 0.
Therefore, We should not clear MediaFailure without scanning volume.
In '8.1 Recommended Write Ordering' of exfat specification describe:
Clear the value of the VolumeDirty field to 0, if its value prior to
the first step was 0.
Therefore, We should not clear VolumeDirty after mounting.
Also rename ERR_MEDIUM to MEDIA_FAILURE.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Write multiple sectors at once when updating dir-entries.
Add exfat_update_bhs() for that. It wait for write completion once
instead of sector by sector.
It's only effective if sync enabled.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
This flag is set/reset in exfat_put_super()/exfat_sync_fs()
to avoid sync_blockdev().
- exfat_put_super():
Before calling this, the VFS has already called sync_filesystem(),
so sync is never performed here.
- exfat_sync_fs():
After calling this, the VFS calls sync_blockdev(), so, it is meaningless
to check EXFAT_SB_DIRTY or to bypass sync_blockdev() here.
Remove the EXFAT_SB_DIRTY check to ensure synchronization.
And remove the code related to the flag.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
The stream.size field is updated to the value of create timestamp
of the file entry. Fix this to use correct stream entry pointer.
Fixes: 29bbb14bfc ("exfat: fix incorrect update of stream entry in __exfat_truncate()")
Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
We found the wrong hint_stat initialization in exfat_find_dir_entry().
It should be initialized when cluster is EXFAT_EOF_CLUSTER.
Fixes: ca06197382 ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
An overflow issue can occur while calculating sector in
exfat_cluster_to_sector(). It needs to cast clus's type to sector_t
before left shifting.
Fixes: 1acf1a564b ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
generic_file_fsync() exfat used could not guarantee the consistency of
a file because it has flushed not dirty metadata but only dirty data pages
for a file.
Instead of that, use exfat_file_fsync() for files and directories so that
it guarantees to commit both the metadata and data pages for a file.
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
We need to commit dirty metadata and pages to disk
before remounting exfat as read-only.
This fixes a failure in xfstests generic/452
generic/452 does the following:
cp something <exfat>/
mount -o remount,ro <exfat>
the <exfat>/something is corrupted. because while
exfat is remounted as read-only, exfat doesn't
have a chance to commit metadata and
vfs invalidates page caches in a block device.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
If the second exfat_get_dentry() call fails then we need to release
"old_bh" before returning. There is a similar bug in exfat_move_file().
Fixes: 5f2aa07507 ("exfat: add inode operations")
Reported-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Some fsck tool complain that padding part of the FileName field
is not set to the value 0000h. So let's maintain filesystem cleaner,
as exfat's spec. recommendation.
Signed-off-by: Hyeongseok.Kim <Hyeongseok@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Pull exfat update from Namjae Jeon:
"Bug fixes:
- Fix memory leak on mount failure with iocharset= option
- Fix incorrect update of stream entry
- Fix cluster range validation error
Clean-ups:
- Remove unused code and unneeded assignment
- Rename variables in exfat structure as specification
- Reorganize boot sector analysis code
- Simplify exfat_utf8_d_hash and exfat_utf8_d_cmp()
- Optimize exfat entry cache functions
- Improve wording of EXFAT_DEFAULT_IOCHARSET config option
New Feature:
- Add boot region verification"
* tag 'exfat-for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: Fix potential use after free in exfat_load_upcase_table()
exfat: fix range validation error in alloc and free cluster
exfat: fix incorrect update of stream entry in __exfat_truncate()
exfat: fix memory leak in exfat_parse_param()
exfat: remove unnecessary reassignment of p_uniname->name_len
exfat: standardize checksum calculation
exfat: add boot region verification
exfat: separate the boot sector analysis
exfat: redefine PBR as boot_sector
exfat: optimize dir-cache
exfat: replace 'time_ms' with 'time_cs'
exfat: remove the assignment of 0 to bool variable
exfat: Remove unused functions exfat_high_surrogate() and exfat_low_surrogate()
exfat: Simplify exfat_utf8_d_hash() for code points above U+FFFF
exfat: Improve wording of EXFAT_DEFAULT_IOCHARSET config option
exfat: Use a more common logging style
exfat: Simplify exfat_utf8_d_cmp() for code points above U+FFFF
This code calls brelse(bh) and then dereferences "bh" on the next line
resulting in a possible use after free. The brelse() should just be
moved down a line.
Fixes: b676fdbcf4c8 ("exfat: standardize checksum calculation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
There is check error in range condition that can never be entered
even with invalid input.
Replace incorrent checking code with already existing valid checker.
Signed-off-by: hyeongseok.kim <hyeongseok@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
At truncate, there is a problem of incorrect updating in the file entry
pointer instead of stream entry. This will cause the problem of
overwriting the time field of the file entry to new_size. Fix it to
update stream entry.
Fixes: 98d917047e ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
kbuild test robot reported :
fs/exfat/nls.c:531:22: warning: Variable 'p_uniname->name_len'
is reassigned a value before the old one has been used.
The reassignment of p_uniname->name_len is not needed and remove it.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
To clarify that it is a 16-bit checksum, the parts related to the 16-bit
checksum are renamed and change type to u16.
Furthermore, replace checksum calculation in exfat_load_upcase_table()
with exfat_calc_checksum32().
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Add Boot-Regions verification specified in exFAT specification.
Note that the checksum type is strongly related to the raw structure,
so the'u32 'type is used to clarify the number of bits.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Separate the boot sector analysis to read_boot_sector().
And add a check for the fs_name field.
Furthermore, add a strict consistency check, because overlapping areas
can cause serious corruption.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Aggregate PBR related definitions and redefine as "boot_sector" to comply
with the exFAT specification.
And, rename variable names including 'pbr'.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Optimize directory access based on exfat_entry_set_cache.
- Hold bh instead of copied d-entry.
- Modify bh->data directly instead of the copied d-entry.
- Write back the retained bh instead of rescanning the d-entry-set.
And
- Remove unused cache related definitions.
Signed-off-by: Tetsuhiro Kohada <kohada.tetsuhiro@dc.mitsubishielectric.co.jp>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
