Adds a method to select a suitable sink connected to a given source.
In cases where no sink is defined, the coresight_find_default_sink
routine can search from a given source, through the child connections
until a suitable sink is found.
The suitability is defined in by the sink coresight_dev_subtype on the
CoreSight device, and the distance from the source by counting
connections.
Higher value subtype is preferred - where these are equal, shorter
distance from source is used as a tie-break.
This allows for default sink to be discovered were none is specified
(e.g. perf command line)
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement a shutdown callback to ensure ETR hardware is
properly shutdown in reboot/shutdown path. This is required
for ETR which has SMMU address translation enabled like on
SC7180 SoC and few others. If the hardware is still accessing
memory after SMMU translation is disabled as part of SMMU
shutdown callback in system reboot or shutdown path, then
IOVAs(I/O virtual address) which it was using will go on the
bus as the physical addresses which might result in unknown
crashes (NoC/interconnect errors). So we make sure from this
shutdown callback that the ETR is shutdown before SMMU translation
is disabled and device_link in SMMU driver will take care of
ordering of shutdown callbacks such that SMMU shutdown callback
is not called before any of its consumer shutdown callbacks.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some Qualcomm Technologies Inc. SoCs like SC7180, there
exists a hardware errata where the APSS (Application Processor
SubSystem)/CPU watchdog counter is stopped when the trace unit
power up ETM register is set (TRCPDCR.PU = 1). Since the ETMs
share the same power domain as that of respective CPU cores,
they are powered on when the CPU core is powered on. So we can
skip powering up of trace unit after checking for this errata
via new property called "qcom,skip-power-up".
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Co-developed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200716175746.3338735-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current probe() function calls a pair of cpuhp_xxx API functions to
setup CPU hotplug handling. The hotplug lock is held for the duration of
the two calls and other CPU related code using cpus_read_lock() /
cpus_read_unlock() calls.
The problem is that on error states, goto: statements bypass the
cpus_read_unlock() call. This code has increased in complexity as the
driver has developed.
This patch introduces a pair of helper functions etm4_pm_setup_cpuslocked()
and etm4_pm_clear() which correct the issues above and group the PM code a
little better.
The two functions etm4_cpu_pm_register() and etm4_cpu_pm_unregister() are
dropped as these call cpu_pm_register_notifier() / ..unregister_notifier()
dependent on CONFIG_CPU_PM - but this define is used to nop these functions
out in the pm headers - so the wrapper functions are superfluous.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Fixes: e9f5d63f84 ("hwtracing/coresight-etm4x: Use cpuhp_setup_state_nocalls_cpuslocked()")
Fixes: 58eb457be0 ("hwtracing/coresight-etm4x: Convert to hotplug state machine")
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200701160852.2782823-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There were a couple problems with error handling in the probe function:
1) If the "drvdata" allocation failed then it lead to a NULL
dereference.
2) On several error paths we decremented "nr_cti_cpu" before it was
incremented which lead to a reference counting bug.
There were also some parts of the error handling which were not bugs but
were messy. The error handling was confusing to read. It printed some
unnecessary error messages.
The simplest way to fix these problems was to create a cti_pm_setup()
function that did all the power management setup in one go. That way
when we call cti_pm_release() we don't have to deal with the
complications of a partially configured power management config.
I reversed the "if (drvdata->ctidev.cpu >= 0)" condition in
cti_pm_release() so that it mirros the new cti_pm_setup() function.
Fixes: 6a0953ce7d ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200701160852.2782823-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
