ARL and MTL share a single GSC firmware blob. However, ARL requires a
newer version of it.
So add differentiate of the PCI ids for ARL from MTL and create ARL as
a sub-platform of MTL. That way, all the existing workarounds and such
still treat ARL as MTL exactly as before. However, now the GSC code
can check for ARL and do an extra version check on the firmware before
committing to it.
Also, the version extraction code has various ways of failing but the
return code was being ignore and so the firmware load would attempt to
continue anyway. Fix that by propagating the return code to the next
level out.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: 213c43676b ("drm/i915/mtl: Remove the 'force_probe' requirement for Meteor Lake")
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802031051.3816392-1-John.C.Harrison@Intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 67733d7a71)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
- Add a new start parameter in trim function to specify exact
address from where to start the trimming. This would help us
in situations like if drivers would like to do address alignment
for specific requirements.
- Add a new flag DRM_BUDDY_TRIM_DISABLE. Drivers can use this
flag to disable the allocator trimming part. This patch enables
the drivers control trimming and they can do it themselves
based on the application requirements.
v1:(Matthew)
- check new_start alignment with min chunk_size
- use range_overflows()
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit db65eb46de)
Add helpers to convert between q4 fixed point and integer/fraction
values. Also add the format/argument macros required to printk q4 fixed
point variables. The q4 notation is based on the short variant described
by
https://en.wikipedia.org/wiki/Q_(number_format)
where only the number of fraction bits in the fixed point value are
defined, while the full size is deducted from the container type, that
is the size of int for these helpers. Using the fxp_ prefix, which makes
moving these helpers outside of drm to a more generic place easier, if
they prove to be useful.
These are needed by later patches dumping the Display Stream Compression
configuration in DRM core and in the i915 driver to replace the
corresponding bpp_x16 helpers defined locally in the driver.
v2: Use the more generic/descriptive fxp_q4 prefix instead of drm_x16.
(Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-2-imre.deak@intel.com
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- panic: Monochrome logo support, Various fixes
- ttm: Improve the number of page faults on some platforms, Fix test
build breakage with PREEMPT_RT, more test coverage and various test
improvements
Driver Changes:
- Add missing MODULE_DESCRIPTION where needed
- ipu-v3: Various fixes
- vc4: Monochrome TV support
- bridge:
- analogix_dp: Various improvements and reworks, handle AUX
transfers timeout
- tc358767: Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR, Fix clock
calculations
- panels:
- More transitions to mipi_dsi wrapped functions
- New panels: Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627-congenial-pistachio-nyala-848cf4@houat
Need to sync some header include that propagated through
drm-intel-next.
v2: After some changes in drm/drm-next
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- bridge: Remove drm_bridge_chain_mode_fixup
- ci: Require a more recent version of mesa, improve farm estup and
test generation
- mipi-dbi: Remove mipi_dbi_machine_little_endian, make SPI bits per
word configurable, support RGB888, and allow pixel formats to be
specified in the DT.
- mm: Remove drm_mm_replace_node
- panic: Allow to dump kmsg to the screen
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
Driver Changes:
- sun4i: Rework the blender setup for DE2
- bridges:
- bridge-connector: Plumb in the new HDMI helpers
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes
- panels:
- More cleanup of prepare / enable state tracking in drivers
- New panel: PrimeView PM070WL4,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240613-cicada-of-infinite-unity-0955ca@houat
drm-misc-next for 6.11:
UAPI Changes:
- Deprecate DRM date and return a 0 date in DRM_IOCTL_VERSION
Core Changes:
- connector: Create a set of helpers to help with HDMI support
- fbdev: Create memory manager optimized fbdev emulation
- panic: Allow to select fonts, improve drm_fb_dma_get_scanout_buffer
Driver Changes:
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- ivpu: hardware scheduler support, profiling support, improvements
to the platform support layer
- mgag200: general reworks and improvements
- nouveau: Add NVreg_RegistryDwords command line option
- rockchip: Conversion to the hdmi helpers
- sun4i: Conversion to the hdmi helpers
- vc4: Conversion to the hdmi helpers
- v3d: Perf counters improvements
- zynqmp: IRQ and debugfs improvements
- bridge:
- Remove redundant checks on bridge->encoder
- panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240530-hilarious-flat-magpie-5fa186@houat
It looks like the documentation for the HDMI-related fields recently
added to both the drm_connector and drm_connector_state structures
trigger some warnings because of their use of anonymous structures:
$ scripts/kernel-doc -none include/drm/drm_connector.h
include/drm/drm_connector.h:1138: warning: Excess struct member 'broadcast_rgb' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'infoframes' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'avi' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'hdr_drm' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'spd' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'vendor' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'is_limited_range' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'output_bpc' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'output_format' description in 'drm_connector_state'
include/drm/drm_connector.h:1138: warning: Excess struct member 'tmds_char_rate' description in 'drm_connector_state'
include/drm/drm_connector.h:2112: warning: Excess struct member 'vendor' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'product' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'supported_formats' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'infoframes' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'lock' description in 'drm_connector'
include/drm/drm_connector.h:2112: warning: Excess struct member 'audio' description in 'drm_connector'
Create some intermediate structures instead of anonymous ones to silence
the warnings.
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: 54cb39e229 ("drm/connector: hdmi: Create an HDMI sub-state")
Fixes: 948f01d5e5 ("drm/connector: hdmi: Add support for output format")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610111200.428224-1-mripard@kernel.org
