Commit Graph

114 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
3d98ffbffb powerpc: Fix lwsync feature fixup vs. modules on 64-bit
Anton's commit enabling the use of the lwsync fixup mechanism on 64-bit
breaks modules. The lwsync fixup section uses .long instead of the
FTR_ENTRY_OFFSET macro used by other fixups sections, and thus will
generate 32-bit relocations that our module loader cannot resolve.

This changes it to use the same type as other feature sections.

Note however that we might want to consider using 32-bit for all the
feature fixup offsets and add support for R_PPC_REL32 to module_64.c
instead as that would reduce the size of the kernel image. I'll leave
that as an exercise for the reader for now...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-26 18:29:17 +11:00
Anton Blanchard
789c299ca2 powerpc: Improve 64bit copy_tofrom_user
Here is a patch from Paul Mackerras that improves the ppc64 copy_tofrom_user.
The loop now does 32 bytes at a time and as well as pairing loads and stores.

A quick test case that reads 8kB over and over shows the improvement:

POWER6: 53% faster
POWER7: 51% faster

#define _XOPEN_SOURCE 500
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>

#define BUFSIZE (8 * 1024)
#define ITERATIONS 10000000

int main()
{
	char tmpfile[] = "/tmp/copy_to_user_testXXXXXX";
	int fd;
	char *buf[BUFSIZE];
	unsigned long i;

	fd = mkstemp(tmpfile);
	if (fd < 0) {
		perror("open");
		exit(1);
	}

	if (write(fd, buf, BUFSIZE) != BUFSIZE) {
		perror("open");
		exit(1);
	}

	for (i = 0; i < 10000000; i++) {
		if (pread(fd, buf, BUFSIZE, 0) != BUFSIZE) {
			perror("pread");
			exit(1);
		}
	}

	unlink(tmpfile);

	return 0;
}

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-17 14:03:16 +11:00
Anton Blanchard
63e6c5b810 powerpc: Pair loads and stores in copy_4k_page
A number of our chips like loads and stores to be paired. A small kernel
module testcase shows the improvement of pairing loads and stores in
copy_4k_page:

POWER6: +9%
POWER7: +1.5%

#include <linux/module.h>
#include <linux/mm.h>

#define ITERATIONS 10000000

static int __init copypage_init(void)
{
	struct timespec before, after;
	unsigned long i;
	struct page *destpage, *srcpage;
	char *dest, *src;

	destpage = alloc_page(GFP_KERNEL);
	srcpage = alloc_page(GFP_KERNEL);

	dest = page_address(destpage);
	src = page_address(srcpage);

	getnstimeofday(&before);

	for (i = 0; i < ITERATIONS; i++)
		copy_4K_page(dest, src);

	getnstimeofday(&after);

	free_page((unsigned long)dest);
	free_page((unsigned long)src);

	printk(KERN_DEBUG "copy_4K_page loop took %lu ns\n",
		(after.tv_sec - before.tv_sec) * NSEC_PER_SEC +
		(after.tv_nsec - before.tv_nsec));

	return 0;
}

static void __exit copypage_exit(void)
{
}

module_init(copypage_init)
module_exit(copypage_exit)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Anton Blanchard");

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-17 14:03:16 +11:00
Anton Blanchard
53eae2281a powerpc: Fix lwsync patching code on 64bit
do_lwsync_fixups doesn't work on 64bit, we end up writing lwsyncs to the
wrong addresses:

0:mon> di c0000001000bfacc
c0000001000bfacc  7c2004ac      lwsync

Since the lwsync section has negative offsets we need to use a signed int
pointer so we sign extend the value.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-17 14:03:15 +11:00
Thomas Gleixner
fb3a6bbc91 locking: Convert raw_rwlock to arch_rwlock
Not strictly necessary for -rt as -rt does not have non sleeping
rwlocks, but it's odd to not have a consistent naming convention.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
0199c4e68d locking: Convert __raw_spin* functions to arch_spin*
Name space cleanup. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
445c89514b locking: Convert raw_spinlock to arch_spinlock
The raw_spin* namespace was taken by lockdep for the architecture
specific implementations. raw_spin_* would be the ideal name space for
the spinlocks which are not converted to sleeping locks in preempt-rt.

Linus suggested to convert the raw_ to arch_ locks and cleanup the
name space instead of using an artifical name like core_spin,
atomic_spin or whatever

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Benjamin Herrenschmidt
bcd6acd51f Merge commit 'origin/master' into next
Conflicts:
	include/linux/kvm.h
2009-12-09 17:14:38 +11:00
Joakim Tjernlund
15d914d72a powerpc/8xx: Start using dcbX instructions in various copy routines
Now that 8xx can fixup dcbX instructions, start using them
where possible like every other PowerPc arch do.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:10:37 +11:00
Anton Blanchard
3cd980dbc1 powerpc: perf_event: Cleanup copy_page output by hiding setup symbol
A lot of hits in "setup" doesn't make much sense, so hide this symbol and
allow all the hits to end up in copy_4k_page.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28 16:13:05 +11:00
Michael Ellerman
ba55bd7436 powerpc: Add configurable -Werror for arch/powerpc
Add the option to build the code under arch/powerpc with -Werror.

The intention is to make it harder for people to inadvertantly introduce
warnings in the arch/powerpc code. It needs to be configurable so that
if a warning is introduced, people can easily work around it while it's
being fixed.

The option is a negative, ie. don't enable -Werror, so that it will be
turned on for allyes and allmodconfig builds.

The default is n, in the hope that developers will build with -Werror,
that will probably lead to some build breaks, I am prepared to be flamed.

It's not enabled for math-emu, which is a steaming pile of warnings.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:45 +10:00
Benjamin Herrenschmidt
b16e7766d6 powerpc: Move dma-noncoherent.c from arch/powerpc/lib to arch/powerpc/mm
(pre-requisite to make the next patches more palatable)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27 16:32:05 +10:00
Benjamin Herrenschmidt
84532a0fc3 Revert "powerpc: Rework dma-noncoherent to use generic vmalloc layer"
This reverts commit 33f00dcedb.

    While it was a good idea to try to use the mm/vmalloc.c allocator instead
    of our own (in fact, ours is itself a dup on an old variant of the vmalloc
    one), unfortunately, the approach is terminally busted since
    dma_alloc_coherent() can be called at interrupt time or in atomic contexts
    and there's little chances we'll make the code in mm/vmalloc.c cope with\       that :-(

    Until we can get the generic code to forbid that idiocy and fix all
    drivers abusing it, we pretty much have no choice but revert to
    our custom virtual space allocator.

    There's also a problem with SMP safety since freeing such mapping
    would require an IPI which cannot be done at interrupt time.

    However, right now, I don't think we support any platform that is
    both SMP and has non-coherent DMA (don't laugh, I know such things
    do exist !) so we can sort that out later.

    Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-27 13:33:14 +10:00
Benjamin Herrenschmidt
e14eee56c2 Merge commit 'origin/master' into next 2009-03-11 17:10:07 +11:00
Mark Nelson
f72b728bf1 powerpc: Fix 64bit __copy_tofrom_user() regression
This fixes a regression introduced by commit
a4e22f02f5 ("powerpc: Update 64bit
__copy_tofrom_user() using CPU_FTR_UNALIGNED_LD_STD").

The same bug that existed in the 64bit memcpy() also exists here so fix
it here too. The fix is the same as that applied to memcpy() with the
addition of fixes for the exception handling code required for
__copy_tofrom_user().

This stops us reading beyond the end of the source region we were told
to copy.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26 14:02:54 +11:00
Mark Nelson
e423b9ecd6 powerpc: Fix 64bit memcpy() regression
This fixes a regression introduced by commit
25d6e2d7c5 ("powerpc: Update 64bit memcpy()
using CPU_FTR_UNALIGNED_LD_STD").

This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU
feature bit present to do the memcpy() with unaligned load doubles. But,
along with this came a bug where our final load double would read bytes
beyond a page boundary and into the next (unmapped) page. This was caught
by enabling CONFIG_DEBUG_PAGEALLOC,

The fix was to read only the number of bytes that we need to store rather
than reading a full 8-byte doubleword and storing only a portion of that.

In order to minimise the amount of existing code touched we use the
original do_tail for the src_unaligned case.

Below is an example of the regression, as reported by Sachin Sant:

Unable to handle kernel paging request for data at address 0xc00000003f380000
Faulting instruction address: 0xc000000000039574
cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020]
    pc: c000000000039574: .memcpy+0x74/0x244
    lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3]
    sp: c00000003baf32a0
   msr: 8000000000009032
   dar: c00000003f380000
 dsisr: 40000000
  current = 0xc00000003e54b010
  paca    = 0xc000000000a53680
    pid   = 1840, comm = readahead
enter ? for help
[link register   ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3]
[c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3]
(unreliab
le)
[c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3]
[c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c
[c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678
[c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68
[c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c
[c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120
[c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3]
[c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260
[c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010
[c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4
[c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4
[c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8
[c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874
[c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140
[c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38
[c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26 14:02:53 +11:00
Ilya Yanok
33f00dcedb powerpc: Rework dma-noncoherent to use generic vmalloc layer
This patch rewrites consistent dma allocations support to use vmalloc
layer to allocate virtual memory space from vmalloc pool and get rid
of CONFIG_CONSISTENT_{START,SIZE}.

This greatly simplifies the code by effectively removing a custom
allocator we had for virtual space.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:57 +11:00
Kumar Gala
16c57b3620 powerpc: Unify opcode definitions and support
Create a new header that becomes a single location for defining PowerPC
opcodes used by code that is either generationg instructions
at runtime (fixups, debug, etc.), emulating instructions, or just
compiling instructions old assemblers don't know about.

We currently don't handle the floating point emulation or alignment decode
as both are better handled by the specific decode support they already
have.

Added support for the new dcbzl, dcbal, msgsnd, tlbilx, & wait instructions
since older assemblers don't know about them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:56 +11:00
Ananth N Mavinakayanahalli
eef336189b powerpc: Don't emulate mr. instructions
Currently emulate_step() emulates mr. instructions without updating cr0
and this can be disastrous. Don't emulate mr.

This bug has been around for a while, but I am not sure if its a worthy
-stable candidate. I'll leave it to Ben do decide.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10 14:39:07 +11:00
Linus Torvalds
3c92ec8ae9 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits)
  powerpc/44x: Support 16K/64K base page sizes on 44x
  powerpc: Force memory size to be a multiple of PAGE_SIZE
  powerpc/32: Wire up the trampoline code for kdump
  powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M
  powerpc/32: Allow __ioremap on RAM addresses for kdump kernel
  powerpc/32: Setup OF properties for kdump
  powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs()
  powerpc: Prepare xmon_save_regs for use with kdump
  powerpc: Remove default kexec/crash_kernel ops assignments
  powerpc: Make default kexec/crash_kernel ops implicit
  powerpc: Setup OF properties for ppc32 kexec
  powerpc/pseries: Fix cpu hotplug
  powerpc: Fix KVM build on ppc440
  powerpc/cell: add QPACE as a separate Cell platform
  powerpc/cell: fix build breakage with CONFIG_SPUFS disabled
  powerpc/mpc5200: fix error paths in PSC UART probe function
  powerpc/mpc5200: add rts/cts handling in PSC UART driver
  powerpc/mpc5200: Make PSC UART driver update serial errors counters
  powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
  powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
  ...

Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-28 16:54:33 -08:00
David Howells
8168b5400b powerpc: Rename struct vm_region to avoid conflict with NOMMU
Rename PowerPC's struct vm_region so that I can introduce my own
global version for NOMMU.  It's feasible that the PowerPC version may
wish to use my global one instead.

The NOMMU vm_region struct defines areas of the physical memory map
that are under mmap.  This may include chunks of RAM or regions of
memory mapped devices, such as flash.  It is also used to retain
copies of file content so that shareable private memory mappings of
files can be made.  As such, it may be compatible with what is
described in the banner comment for PowerPC's vm_region struct.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
Ingo Molnar
30cd324e97 Merge branches 'tracing/ftrace', 'tracing/ring-buffer' and 'tracing/urgent' into tracing/core
Conflicts:
	include/linux/ftrace.h
2008-12-19 09:42:40 +01:00
Paul Mackerras
c280266a32 Merge branch 'linux-2.6' into next 2008-12-18 11:06:12 +11:00
Guillaume Knispel
af4d364386 powerpc: Fix corruption error in rh_alloc_fixed()
There is an error in rh_alloc_fixed() of the Remote Heap code:
If there is at least one free block blk won't be NULL at the end of the
search loop, so -ENOMEM won't be returned and the else branch of
"if (bs == s || be == e)" will be taken, corrupting the management
structures.

Signed-off-by: Guillaume Knispel <gknispel@proformatique.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-17 10:06:14 -06:00
Steven Rostedt
f1eecf0e4f powerpc/ppc32: static ftrace fixes for PPC32
Impact: fix for PowerPC 32 code

There were some early init code that was not safe for static
ftrace to boot on my PowerBook. This code must only use relative
addressing, and static mcount performs a compare of the
ftrace_trace_function pointer, and gets that with an absolute address.
In the early init boot up code, this will cause a fault.

This patch removes tracing from the files containing the offending
functions.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-28 14:08:07 +01:00