Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
The AMD side of the loader has always claimed to support mixed
steppings. But somewhere along the way, it broke that by assuming that
the cached patch blob is a single one instead of it being one per
*node*.
So turn it into a per-node one so that each node can stash the blob
relevant for it.
[ NB: Fixes tag is not really the exactly correct one but it is good
enough. ]
Fixes: fe055896c0 ("x86/microcode: Merge the early microcode loader")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org> # 2355370cd9 ("x86/microcode/amd: Remove load_microcode_amd()'s bsp parameter")
Cc: <stable@kernel.org> # a5ad92134b ("x86/microcode/AMD: Add a @cpu parameter to the reloading functions")
Link: https://lore.kernel.org/r/20230130161709.11615-4-bp@alien8.de
Microcode gets reloaded late only if "1" is written to the reload file.
However, the code silently treats any other unsigned integer as a
successful write even though no actions are performed to load microcode.
Make the loader more strict to accept only "1" as a trigger value and
return an error otherwise.
[ bp: Massage commit message. ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230130213955.6046-3-ashok.raj@intel.com
Make early loading message match late loading message and print both old
and new revisions.
This is helpful to know what the BIOS loaded revision is before an early
update.
Cache the early BIOS revision before the microcode update and have
print_ucode_info() print both the old and new revision in the same
format as microcode_reload_late().
[ bp: Massage, remove useless comment. ]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230120161923.118882-6-ashok.raj@intel.com
print_ucode_info() takes a struct ucode_cpu_info pointer as parameter.
Its sole purpose is to print the microcode revision.
The only available ucode_cpu_info always describes the currently loaded
microcode revision. After a microcode update is successful, this is the
new revision, or on failure it is the original revision.
In preparation for future changes, replace the struct ucode_cpu_info
pointer parameter with a plain integer which contains the revision
number and adjust the call sites accordingly.
No functional change.
[ bp:
- Fix + cleanup commit message.
- Revert arbitrary, unrelated change.
]
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230120161923.118882-5-ashok.raj@intel.com
During late microcode loading, the "Reload completed" message is issued
unconditionally, regardless of success or failure.
Adjust the message to report the result of the update.
[ bp: Massage. ]
Fixes: 9bd681251b ("x86/microcode: Announce reload operation's completion")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/lkml/874judpqqd.ffs@tglx/
The kernel caches each CPU's feature bits at boot in an x86_capability[]
structure. However, the capabilities in the BSP's copy can be turned off
as a result of certain command line parameters or configuration
restrictions, for example the SGX bit. This can cause a mismatch when
comparing the values before and after the microcode update.
Another example is X86_FEATURE_SRBDS_CTRL which gets added only after
microcode update:
--- cpuid.before 2023-01-21 14:54:15.652000747 +0100
+++ cpuid.after 2023-01-21 14:54:26.632001024 +0100
@@ -10,7 +10,7 @@ CPU:
0x00000004 0x04: eax=0x00000000 ebx=0x00000000 ecx=0x00000000 edx=0x00000000
0x00000005 0x00: eax=0x00000040 ebx=0x00000040 ecx=0x00000003 edx=0x11142120
0x00000006 0x00: eax=0x000027f7 ebx=0x00000002 ecx=0x00000001 edx=0x00000000
- 0x00000007 0x00: eax=0x00000000 ebx=0x029c6fbf ecx=0x40000000 edx=0xbc002400
+ 0x00000007 0x00: eax=0x00000000 ebx=0x029c6fbf ecx=0x40000000 edx=0xbc002e00
^^^
and which proves for a gazillionth time that late loading is a bad bad
idea.
microcode_check() is called after an update to report any previously
cached CPUID bits which might have changed due to the update.
Therefore, store the cached CPU caps before the update and compare them
with the CPU caps after the microcode update has succeeded.
Thus, the comparison is done between the CPUID *hardware* bits before
and after the upgrade instead of using the cached, possibly runtime
modified values in BSP's boot_cpu_data copy.
As a result, false warnings about CPUID bits changes are avoided.
[ bp:
- Massage.
- Add SRBDS_CTRL example.
- Add kernel-doc.
- Incorporate forgotten review feedback from dhansen.
]
Fixes: 1008c52c09 ("x86/CPU: Add a microcode loader callback")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230109153555.4986-3-ashok.raj@intel.com
It can happen that - especially during testing - the microcode
blobs of all families are all glued together in the initrd. The
current code doesn't check whether the current container matched
a microcode patch and continues to the next one, which leads to
save_microcode_in_initrd_amd() to look at the next and thus wrong one:
microcode: parse_container: ucode: 0xffff88807e9d9082
microcode: verify_patch: buf: 0xffff88807e9d90ce, buf_size: 26428
microcode: verify_patch: proc_id: 0x8082, patch_fam: 0x17, this family: 0x17
microcode: verify_patch: buf: 0xffff88807e9d9d56, buf_size: 23220
microcode: verify_patch: proc_id: 0x8012, patch_fam: 0x17, this family: 0x17
microcode: parse_container: MATCH: eq_id: 0x8012, patch proc_rev_id: 0x8012
<-- matching patch found
microcode: verify_patch: buf: 0xffff88807e9da9de, buf_size: 20012
microcode: verify_patch: proc_id: 0x8310, patch_fam: 0x17, this family: 0x17
microcode: verify_patch: buf: 0xffff88807e9db666, buf_size: 16804
microcode: Invalid type field (0x414d44) in container file section header.
microcode: Patch section fail
<-- checking chokes on the microcode magic value of the next container.
microcode: parse_container: saving container 0xffff88807e9d9082
microcode: save_microcode_in_initrd_amd: scanned containers, data: 0xffff88807e9d9082, size: 9700a
and now if there's a next (and last container) it'll use that in
save_microcode_in_initrd_amd() and not find a proper patch, ofc.
Fix that by moving the out: label up, before the desc->mc check which
jots down the pointer of the matching patch and is used to signal to the
caller that it has found a matching patch in the current container.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221219210656.5140-2-bp@alien8.de
- Rename apply_microcode_early_amd() to early_apply_microcode():
simplify the name so that it is clear what it does and when does it do
it.
- Rename __load_ucode_amd() to find_blobs_in_containers(): the new name
actually explains what it does.
Document some.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221219210656.5140-1-bp@alien8.de
Pull x86 microcode and IFS updates from Borislav Petkov:
"The IFS (In-Field Scan) stuff goes through tip because the IFS driver
uses the same structures and similar functionality as the microcode
loader and it made sense to route it all through this branch so that
there are no conflicts.
- Add support for multiple testing sequences to the Intel In-Field
Scan driver in order to be able to run multiple different test
patterns. Rework things and remove the BROKEN dependency so that
the driver can be enabled (Jithu Joseph)
- Remove the subsys interface usage in the microcode loader because
it is not really needed
- A couple of smaller fixes and cleanups"
* tag 'x86_microcode_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/microcode/intel: Do not retry microcode reloading on the APs
x86/microcode/intel: Do not print microcode revision and processor flags
platform/x86/intel/ifs: Add missing kernel-doc entry
Revert "platform/x86/intel/ifs: Mark as BROKEN"
Documentation/ABI: Update IFS ABI doc
platform/x86/intel/ifs: Add current_batch sysfs entry
platform/x86/intel/ifs: Remove reload sysfs entry
platform/x86/intel/ifs: Add metadata validation
platform/x86/intel/ifs: Use generic microcode headers and functions
platform/x86/intel/ifs: Add metadata support
x86/microcode/intel: Use a reserved field for metasize
x86/microcode/intel: Add hdr_type to intel_microcode_sanity_check()
x86/microcode/intel: Reuse microcode_sanity_check()
x86/microcode/intel: Use appropriate type in microcode_sanity_check()
x86/microcode/intel: Reuse find_matching_signature()
platform/x86/intel/ifs: Remove memory allocation from load path
platform/x86/intel/ifs: Remove image loading during init
platform/x86/intel/ifs: Return a more appropriate error code
platform/x86/intel/ifs: Remove unused selection
x86/microcode: Drop struct ucode_cpu_info.valid
...
The retries in load_ucode_intel_ap() were in place to support systems
with mixed steppings. Mixed steppings are no longer supported and there is
only one microcode image at a time. Any retries will simply reattempt to
apply the same image over and over without making progress.
[ bp: Zap the circumstantial reasoning from the commit message. ]
Fixes: 06b8534cb7 ("x86/microcode: Rework microcode loading")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221129210832.107850-3-ashok.raj@intel.com
collect_cpu_info() is used to collect the current microcode revision and
processor flags on every CPU.
It had a weird mechanism to try to mimick a "once" functionality in the
sense that, that information should be issued only when it is differing
from the previous CPU.
However (1):
the new calling sequence started doing that in parallel:
microcode_init()
|-> schedule_on_each_cpu(setup_online_cpu)
|-> collect_cpu_info()
resulting in multiple redundant prints:
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
However (2):
dumping this here is not that important because the kernel does not
support mixed silicon steppings microcode. Finally!
Besides, there is already a pr_info() in microcode_reload_late() that
shows both the old and new revisions.
What is more, the CPU signature (sig=0x50654) and Processor Flags
(pf=0x80) above aren't that useful to the end user, they are available
via /proc/cpuinfo and they don't change anyway.
Remove the redundant pr_info().
[ bp: Heavily massage. ]
Fixes: b6f86689d5 ("x86/microcode: Rip out the subsys interface gunk")
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221103175901.164783-2-ashok.raj@intel.com
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
