We need the tty/serial fixes in here as well for testing, and this
resolves merge conflicts in:
drivers/tty/serial/serial_core.c
as reported in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.
We have a regression in TC currently under investigation, otherwise
the things that stand off most are probably the TCP and AF_PACKET
fixes, with both issues coming from 6.5.
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list"
* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
rswitch: Fix imbalance phy_power_off() calling
rswitch: Fix renesas_eth_sw_remove() implementation
octeontx2-pf: Fix page pool frag allocation warning
nfc: nci: assert requested protocol is valid
af_packet: Fix fortified memcpy() without flex array.
net: tcp: fix crashes trying to free half-baked MTU probes
net/smc: Fix pos miscalculation in statistics
nfp: flower: avoid rmmod nfp crash issues
net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
ethtool: Fix mod state of verbose no_mask bitset
net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
mctp: perform route lookups under a RCU read-side lock
net: skbuff: fix kernel-doc typos
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
net/smc: Fix dependency of SMC on ISM
ixgbe: fix crash with empty VF macvlan list
net/mlx5e: macsec: use update_pn flag instead of PN comparation
net: phy: mscc: macsec: reject PN update requests
...
Sergei Trofimovich reported a regression [0] caused by commit a0ade8404c
("af_packet: Fix warning of fortified memcpy() in packet_getname().").
It introduced a flex array sll_addr_flex in struct sockaddr_ll as a
union-ed member with sll_addr to work around the fortified memcpy() check.
However, a userspace program uses a struct that has struct sockaddr_ll in
the middle, where a flex array is illegal to exist.
include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t'
24 | __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex);
| ^~~~~~~~~~~~~~~~~~~~
To fix the regression, let's go back to the first attempt [1] telling
memcpy() the actual size of the array.
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0]
Link: https://lore.kernel.org/netdev/20230720004410.87588-3-kuniyu@amazon.com/ [1]
Fixes: a0ade8404c ("af_packet: Fix warning of fortified memcpy() in packet_getname().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231009153151.75688-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current pattern in the linux kernel is that every new serial driver adds
one or more new PORT_ definitions because uart_ops::config_port()
callback documentation prescribes setting port->type according to the
type of port found, or to PORT_UNKNOWN if no port was detected.
When the specific type of the port is not important to the userspace
there's no need for a unique PORT_ value, but so far there's no suitable
identifier for that case.
Provide generic port type identifier other than PORT_UNKNOWN for ports
which type is not important to userspace.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231008001804.889727-1-jcmvbkbc@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Report the maximum number of IBs that can be pushed with a single
DRM_IOCTL_NOUVEAU_EXEC through DRM_IOCTL_NOUVEAU_GETPARAM.
While the maximum number of IBs per ring might vary between chipsets,
the kernel will make sure that userspace can only push a fraction of the
maximum number of IBs per ring per job, such that we avoid a situation
where there's only a single job occupying the ring, which could
potentially lead to the ring run dry.
Using DRM_IOCTL_NOUVEAU_GETPARAM to report the maximum number of IBs
that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC implies that
all channels of a given device have the same ring size.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231002135008.10651-3-dakr@redhat.com
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
__DECLARE_FLEX_ARRAY(T, member) macro expands to
struct {
struct {} __empty_member;
T member[];
};
which is subtly wrong in C++ because sizeof(struct{}) is 1 not 0,
changing UAPI structures layouts.
This can be fixed by expanding to
T member[];
Now g++ doesn't like "T member[]" either, throwing errors on
the following code:
struct S {
union {
T1 member1[];
T2 member2[];
};
};
or
struct S {
T member[];
};
Use "T member[0];" which seems to work and does the right thing wrt
structure layout.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: 3080ea5553 ("stddef: Introduce DECLARE_FLEX_ARRAY() helper")
Link: https://lore.kernel.org/r/97242381-f1ec-4a4a-9472-1a464f575657@p183
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
Pull more SCSI updates from James Bottomley:
"Mostly small stragglers that missed the initial merge.
Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat
due to the volatile qualifier removal, fnic due to unused function
removal and sd.c has a lot of code shuffling to remove forward
declarations)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler
scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD
scsi: mpt3sas: Remove volatile qualifier
scsi: mpt3sas: Perform additional retries if doorbell read returns 0
scsi: libsas: Simplify sas_queue_reset() and remove unused code
scsi: ufs: Fix the build for the old ARM OABI
scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag()
scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
scsi: fnic: Replace sgreset tag with max_tag_id
scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs()
scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error
scsi: smartpqi: Change driver version to 2.1.24-046
scsi: smartpqi: Enhance error messages
scsi: smartpqi: Enhance controller offline notification
scsi: smartpqi: Enhance shutdown notification
scsi: smartpqi: Simplify lun_number assignment
scsi: smartpqi: Rename pciinfo to pci_info
scsi: smartpqi: Rename MACRO to clarify purpose
scsi: smartpqi: Add abort handler
...
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
Pull fuse updates from Miklos Szeredi:
- Revert non-waiting FLUSH due to a regression
- Fix a lookup counter leak in readdirplus
- Add an option to allow shared mmaps in no-cache mode
- Add btime support and statx intrastructure to the protocol
- Invalidate positive/negative dentry on failed create/delete
* tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: conditionally fill kstat in fuse_do_statx()
fuse: invalidate dentry on EEXIST creates or ENOENT deletes
fuse: cache btime
fuse: implement statx
fuse: add ATTR_TIMEOUT macro
fuse: add STATX request
fuse: handle empty request_mask in statx
fuse: write back dirty pages before direct write in direct_io_relax mode
fuse: add a new fuse init flag to relax restrictions in no cache mode
fuse: invalidate page cache pages before direct write
fuse: nlookup missing decrement in fuse_direntplus_link
Revert "fuse: in fuse_flush only wait if someone wants the return code"
Pull rpmsg updates from Bjorn Andersson:
"Add support for the GLINK flow control signals, and expose this to the
user through the rpmsg_char interface. Add missing kstrdup() failure
handling during allocation of GLINK channel objects"
* tag 'rpmsg-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid dereferencing NULL channel
rpmsg: glink: Add check for kstrdup
rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
rpmsg: glink: Add support to handle signals command
rpmsg: core: Add signal API support
Pull virtio updates from Michael Tsirkin:
"A small pull request this time around, mostly because the vduse
network got postponed to next relase so we can be sure we got the
security store right"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_ring: fix avail_wrap_counter in virtqueue_add_packed
virtio_vdpa: build affinity masks conditionally
virtio_net: merge dma operations when filling mergeable buffers
virtio_ring: introduce dma sync api for virtqueue
virtio_ring: introduce dma map api for virtqueue
virtio_ring: introduce virtqueue_reset()
virtio_ring: separate the logic of reset/enable from virtqueue_resize
virtio_ring: correct the expression of the description of virtqueue_resize()
virtio_ring: skip unmap for premapped
virtio_ring: introduce virtqueue_dma_dev()
virtio_ring: support add premapped buf
virtio_ring: introduce virtqueue_set_dma_premapped()
virtio_ring: put mapping error check in vring_map_one_sg
virtio_ring: check use_dma_api before unmap desc for indirect
vdpa_sim: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa: add get_backend_features vdpa operation
vdpa: accept VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature
vdpa: add VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK flag
vdpa/mlx5: Remove unused function declarations
This feature flag allows the driver enabling virtqueues both before and
after DRIVER_OK.
This is needed for software assisted live migration, so userland can
restore the device status in devices with control virtqueue before the
dataplane is enabled.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-2-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
