It is quite possible for the event to have been disabled between
perf_event_read() sending the IPI and the CPU servicing the IPI and
calling __perf_event_read(), hence revalidate the state.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 927c7a9e92 ("perf: Fix race in callchains") introduced
a mismatch in the sizing of struct callchain_cpus_entries.
nr_cpu_ids must be used instead of num_possible_cpus(), or we
might get out of bound memory accesses on some machines.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Stephane Eranian <eranian@google.com>
CC: stable@kernel.org
LKML-Reference: <1295980851.3588.351.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lockdep spotted:
loop_1b_instruc/1899 is trying to acquire lock:
(event_mutex){+.+.+.}, at: [<ffffffff810e1908>] perf_trace_init+0x3b/0x2f7
but task is already holding lock:
(&ctx->mutex){+.+.+.}, at: [<ffffffff810eb45b>] perf_event_init_context+0xc0/0x218
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&ctx->mutex){+.+.+.}:
-> #2 (cpu_hotplug.lock){+.+.+.}:
-> #1 (module_mutex){+.+...}:
-> #0 (event_mutex){+.+.+.}:
But because the deadlock would be cpuhotplug (cpu-event) vs fork
(task-event) it cannot, in fact, happen. We can annotate this by giving the
perf_event_context used for the cpuctx a different lock class from those
used by tasks.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf_event_init_task() should clear child->perf_event_ctxp[]
before anything else. Otherwise, if
perf_event_init_context(perf_hw_context) fails,
perf_event_free_task() can free perf_event_ctxp[perf_sw_context]
copied from parent->perf_event_ctxp[] by dup_task_struct().
Also move the initialization of perf_event_mutex and
perf_event_list from perf_event_init_context() to
perf_event_init_context().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
LKML-Reference: <20110119182228.GC12183@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
find_get_context() must not install the new perf_event_context
if the task has already passed perf_event_exit_task().
If nothing else, this means the memory leak. Initially
ctx->refcount == 2, it is supposed that
perf_event_exit_task_context() should participate and do the
necessary put_ctx().
find_lively_task_by_vpid() checks PF_EXITING but this buys
nothing, by the time we call find_get_context() this task can be
already dead. To the point, cmpxchg() can succeed when the task
has already done the last schedule().
Change find_get_context() to populate task->perf_event_ctxp[]
under task->perf_event_mutex, this way we can trust PF_EXITING
because perf_event_exit_task() takes the same mutex.
Also, change perf_event_exit_task_context() to use
rcu_dereference(). Probably this is not strictly needed, but
with or without this change find_get_context() can race with
setup_new_exec()->perf_event_exit_task(), rcu_dereference()
looks better.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
LKML-Reference: <20110119182207.GB12183@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Validate cpu early in perf_event_alloc()
perf: Find_get_context: fix the per-cpu-counter check
perf: Fix contexted inheritance
Linus reported that the RCU lockdep annotation bits triggered for this
rcu_dereference() because we're not holding rcu_read_lock().
Going over the code I cannot convince myself its correct:
- holding a ref on the parent_ctx, doesn't avoid it being uncloned
concurrently (as the comment says), so we can race with a free.
- holding parent_ctx->mutex doesn't avoid the above free from taking
place either, it would at best avoid parent_ctx from being freed.
I.e. the warning is correct. To fix the bug, serialize against the
unclone_ctx() call by extending the reach of the parent_ctx->lock.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace all occurrences of:
event->cpu != -1 && event->cpu == smp_processor_id()
by a call to:
event_filter_match(event)
This makes the code more consistent and will make the cgroup
patch smaller.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In particular this patch move perf_event_exit_task() before
cgroup_exit() to allow for cgroup support. The cgroup_exit()
function detaches the cgroups attached to a task.
Other movements include hoisting some definitions and inlines
at the top of perf_event.c
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
Simple sysfs emumeration of the PMUs.
Use a "event_source" bus, and add PMU devices using their name.
Each PMU device has a type attribute which contrains the value needed
for perf_event_attr::type to identify this PMU.
This is the minimal stub needed to start using this interface,
we'll consider extending the sysfs usage later.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.316982569@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Extend the perf_pmu_register() interface to allow for named and
dynamic pmu types.
Because we need to support the existing static types we cannot use
dynamic types for everything, hence provide a type argument.
If we want to enumerate the PMUs they need a name, provide one.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.259707703@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The perf_swevent_enabled[] array has PERF_COUNT_SW_MAX elements.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101024195041.GT5985@bicker>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use the reboot notifier to detach all running counters on reboot, this
solves a problem with kexec where the new kernel doesn't expect
running counters (rightly so).
It will however decrease the coverage of the NMI watchdog. Making a
kexec specific reboot notifier callback would be best, however that
would require touching all notifier callback handlers as they are not
properly structured to deal with new state.
As a compromise, place the perf reboot notifier at the very last
position in the list.
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because the multi-pmu bits can share contexts between struct pmu
instances we could get duplicate events by iterating the pmu list.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If perf_event_attr.sample_id_all is set it will add the PERF_SAMPLE_ identity
info:
TID, TIME, ID, CPU, STREAM_ID
As a trailer, so that older perf tools can process new files, just ignoring the
extra payload.
With this its possible to do further analysis on problems in the event stream,
like detecting reordering of MMAP and FORK events, etc.
V2: Fixup header size in comm, mmap and task processing, as we have to take into
account different sample_types for each matching event, noticed by Thomas Gleixner.
Thomas also noticed a problem in v2 where if we didn't had space in the buffer we
wouldn't restore the header size.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
