Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
Pull tracing fixes from Steven Rostedt:
- Fix tp_printk command line option crashing the kernel
With the code that can handle a buffer from a previous boot, the
trace_check_vprintf() needed access to the delta of the address space
used by the old buffer and the current buffer. To do so, the
trace_array (tr) parameter was used. But when tp_printk is enabled on
the kernel command line, no trace buffer is used and the trace event
is sent directly to printk(). That meant the tr field of the iterator
descriptor was NULL, and since tp_printk still uses
trace_check_vprintf() it caused a NULL dereference.
- Add ptrace.h include to x86 ftrace file for completeness
- Fix rtla installation when done with out-of-tree build
- Fix the help messages in rtla that were incorrect
- Several fixes to fix races with the timerlat and hwlat code
Several locking issues were discovered with the coordination between
timerlat kthread creation and hotplug. As timerlat has callbacks from
hotplug code to start kthreads when CPUs come online. There are also
locking issues with grabbing the cpu_read_lock() and the locks within
timerlat.
* tag 'trace-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Fix a race during cpuhp processing
tracing/timerlat: Fix a race during cpuhp processing
tracing/timerlat: Drop interface_lock in stop_kthread()
tracing/timerlat: Fix duplicated kthread creation due to CPU online/offline
x86/ftrace: Include <asm/ptrace.h>
rtla: Fix the help text in osnoise and timerlat top tools
tools/rtla: Fix installation from out-of-tree build
tracing: Fix trace_check_vprintf() when tp_printk is used
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
regarding flowtable hooks, from Phil Sutter.
2) Fix nft_audit.sh selftests with newer nft binaries, due to different
(valid) audit output, also from Phil.
3) Disable BH when duplicating packets via nf_dup infrastructure,
otherwise race on nf_skb_duplicated for locally generated traffic.
From Eric.
4) Missing return in callback of selftest C program, from zhang jiao.
netfilter pull request 24-10-02
* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Add missing return value
netfilter: nf_tables: prevent nf_skb_duplicated corruption
selftests: netfilter: Fix nft_audit.sh for newer nft binaries
netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================
Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The include.sh file is generated for inclusion and should not be executable.
Otherwise, it will be added to kselftest-list.txt. Additionally, add the
executable bit for test.py at the same time to ensure proper functionality.
Fixes: 3ade6ce125 ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
step_after_suspend_test fails with device busy error while
writing to /sys/power/state to start suspend. The test believes
it failed to enter suspend state with
$ sudo ./step_after_suspend_test
TAP version 13
Bail out! Failed to enter Suspend state
However, in the kernel message, I indeed see the system get
suspended and then wake up later.
[611172.033108] PM: suspend entry (s2idle)
[611172.044940] Filesystems sync: 0.006 seconds
[611172.052254] Freezing user space processes
[611172.059319] Freezing user space processes completed (elapsed 0.001 seconds)
[611172.067920] OOM killer disabled.
[611172.072465] Freezing remaining freezable tasks
[611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[611172.089724] printk: Suspending console(s) (use no_console_suspend to debug)
[611172.117126] serial 00:03: disabled
some other hardware get reconnected
[611203.136277] OOM killer enabled.
[611203.140637] Restarting tasks ...
[611203.141135] usb 1-8.1: USB disconnect, device number 7
[611203.141755] done.
[611203.155268] random: crng reseeded on system resumption
[611203.162059] PM: suspend exit
After investigation, I noticed that for the code block
if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem"))
ksft_exit_fail_msg("Failed to enter Suspend state\n");
The write will return -1 and errno is set to 16 (device busy).
It should be caused by the write function is not successfully returned
before the system suspend and the return value get messed when waking up.
As a result, It may be better to check the time passed of those few
instructions to determine whether the suspend is executed correctly for
it is pretty hard to execute those few lines for 5 seconds.
The timer to wake up the system is set to expire after 5 seconds and
no re-arm. If the timer remaining time is 0 second and 0 nano secomd,
it means the timer expired and wake the system up. Otherwise, the system
could be considered to enter the suspend state failed if there is any
remaining time.
After appling this patch, the test would not fail for it believes the
system does not go to suspend by mistake. It now could continue to the
rest part of the test after suspend.
Fixes: bfd092b8c2 ("selftests: breakpoint: add step_after_suspend_test")
Reported-by: Sinadin Shan <sinadin.shan@oracle.com>
Signed-off-by: Yifei Liu <yifei.l.liu@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Insert raw strings to prevent Python3 from interpreting string literals
as Unicode strings and "\d" as invalid escaped sequence.
Fix the warnings:
tools/testing/selftests/devices/probe/test_discoverable_devices.py:48:
SyntaxWarning: invalid escape sequence '\d' usb_controller_sysfs_dir =
"usb[\d]+"
tools/testing/selftests/devices/probe/test_discoverable_devices.py: 94:
SyntaxWarning: invalid escape sequence '\d' re_usb_version =
re.compile("PRODUCT=.*/(\d)/.*")
Fixes: dacf1d7a78 ("kselftest: Add test to verify probe of devices from discoverable buses")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ASoC: Fixes for v6.12
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
The recent addition of support for testing with the x86 specific quirk
KVM_X86_QUIRK_SLOT_ZAP_ALL disabled in the generic memslot tests broke the
build of the KVM selftests for all other architectures:
In file included from include/kvm_util.h:8,
from include/memstress.h:13,
from memslot_modification_stress_test.c:21:
memslot_modification_stress_test.c: In function ‘main’:
memslot_modification_stress_test.c:176:38: error: ‘KVM_X86_QUIRK_SLOT_ZAP_ALL’ undeclared (first use in this function)
176 | KVM_X86_QUIRK_SLOT_ZAP_ALL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Add __x86_64__ guard defines to avoid building the relevant code on other
architectures.
Fixes: 61de4c34b5 ("KVM: selftests: Test memslot move in memslot_perf_test with quirk disabled")
Fixes: 218f641500 ("KVM: selftests: Allow slot modification stress test with quirk disabled")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-ID: <20240930-kvm-build-breakage-v1-1-866fad3cc164@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
HID test cases run tests using the run-hid-tools-tests.sh script.
When installed with "make install", the run-hid-tools-tests.sh
script will not be copied over, resulting in the following error message.
make -C tools/testing/selftests/ TARGETS=hid install \
INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c hid
selftests: hid: hid-core.sh
bash: ./run-hid-tools-tests.sh: No such file or directory
Add the run-hid-tools-tests.sh script to the TEST_FILES in the Makefile
for it to be installed.
Fixes: ffb85d5c9e ("selftests: hid: import hid-tools hid-core tests")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This prevents false sharing, which makes a large difference on machines
with several NUMA nodes, such as on a dual socket Intel(R) Xeon(R) Gold
6338 CPU @ 2.00GHz, where the "bench-multi" test goes from 2.7s down to
1.9s. While this is just test code, it also forms the basis of how folks
will wind up implementing this in libraries, so we should implement this
simple cache alignment improvement here.
Suggested-by: Florian Weimer <fweimer@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull sched_ext fixes from Tejun Heo:
- When sched_ext is in bypass mode (e.g. while disabling the BPF
scheduler), it was using one DSQ to implement global FIFO scheduling
as all it has to do is guaranteeing reasonable forward progress.
On multi-socket machines, this can lead to live-lock conditions under
certain workloads. Fixed by splitting the queue used for FIFO
scheduling per NUMA node. This required several preparation patches.
- Hotplug tests on powerpc could reliably trigger deadlock while
enabling a BPF scheduler.
This was caused by cpu_hotplug_lock nesting inside scx_fork_rwsem and
then CPU hotplug path trying to fork a new thread while holding
cpu_hotplug_lock.
Fixed by restructuring locking in enable and disable paths so that
the two locks are not coupled. This required several preparation
patches which also fixed a couple other issues in the enable path.
- A build fix for !CONFIG_SMP
- Userspace tooling sync and updates
* tag 'sched_ext-for-6.12-rc1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove redundant p->nr_cpus_allowed checker
sched_ext: Decouple locks in scx_ops_enable()
sched_ext: Decouple locks in scx_ops_disable_workfn()
sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()
sched_ext: Enable scx_ops_init_task() separately
sched_ext: Fix SCX_TASK_INIT -> SCX_TASK_READY transitions in scx_ops_enable()
sched_ext: Initialize in bypass mode
sched_ext: Remove SCX_OPS_PREPPING
sched_ext: Relocate check_hotplug_seq() call in scx_ops_enable()
sched_ext: Use shorter slice while bypassing
sched_ext: Split the global DSQ per NUMA node
sched_ext: Relocate find_user_dsq()
sched_ext: Allow only user DSQs for scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new()
scx_flatcg: Use a user DSQ for fallback instead of SCX_DSQ_GLOBAL
tools/sched_ext: Receive misc updates from SCX repo
sched_ext: Add __COMPAT helpers for features added during v6.12 devel cycle
sched_ext: Build fix for !CONFIG_SMP
The name of the "load_address" objects has been modified, but the
corresponding entry in the gitignore file must be updated.
Update the load_address entry in the gitignore file to account for
the new names, adding an exception to keep on tracking load_address.c.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This executable is missing from the corresponding gitignore file.
Add unshare_test to the core gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
__fatal_error routine doesn't check strerror_r() return value,
which results in the following compile time warning:
posix_timers.c: In function ‘__fatal_error’:
posix_timers.c:31:9: warning: ignoring return value of ‘strerror_r’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
31 | strerror_r(errno, buf, sizeof(buf));
Fix this by adding a check for return value and error handling appropriate
for the GNU-specific strerror_r() in use in __fatal_error(). Check if
return string is null and handle accordingly.
From Linux strerror_r() manual page:
"The GNU-specific strerror_r() returns a pointer to a string containing
the error message. This may be either a pointer to a string that the
function stores in buf, or a pointer to some (immutable) static string
(in which case buf is unused). If the function stores a string in buf,
then at most buflen bytes are stored (the string may be truncated if
buflen is too small and errnum is unknown). The string always includes
a terminating null byte."
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, if alsa development package is not installed on the user's
system then the make command would print a `pagefull` of errors. In
particular one error message is repeated 3 times. This error is returned
by `pkg-config` and since it is not being handeled appropriately,
repeated calls to `pkg-config` prints the same message again.
This patch adds check for alsa package installation. If alsa is not
installed, a short and consize error is returned. Also, it does not
affect the compilation of other tests.
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20240922225824.18918-1-abdul.rahim@myyahoo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
