When I expanded uidgid mappings I intended for a struct uid_gid_map to
fit into a single cacheline on x86 as they tend to be pretty
performance sensitive (idmapped mounts etc). But a 4 byte hole was added
that brought it over 64 bytes. Fix that by adding the static extent
array and the extent counter into a substruct. C's type punning for
unions guarantees that we can access ->nr_extents even if the last
written to member wasn't within the same object. This is also what we
rely on in struct_group() and friends. This of course relies on
non-strict aliasing which we don't do.
99) If the member used to read the contents of a union object is not the
same as the member last used to store a value in the object, the
appropriate part of the object representation of the value is
reinterpreted as an object representation in the new type as
described in 6.2.6 (a process sometimes called "type punning").
Link: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2310.pdf
Link: https://lore.kernel.org/r/20240910-work-uid_gid_map-v1-1-e6bc761363ed@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable unprivileged sandboxes to create their own binfmt_misc mounts.
This is based on Laurent's work in [1] but has been significantly
reworked to fix various issues we identified in earlier versions.
While binfmt_misc can currently only be mounted in the initial user
namespace, binary types registered in this binfmt_misc instance are
available to all sandboxes (Either by having them installed in the
sandbox or by registering the binary type with the F flag causing the
interpreter to be opened right away). So binfmt_misc binary types are
already delegated to sandboxes implicitly.
However, while a sandbox has access to all registered binary types in
binfmt_misc a sandbox cannot currently register its own binary types
in binfmt_misc. This has prevented various use-cases some of which were
already outlined in [1] but we have a range of issues associated with
this (cf. [3]-[5] below which are just a small sample).
Extend binfmt_misc to be mountable in non-initial user namespaces.
Similar to other filesystem such as nfsd, mqueue, and sunrpc we use
keyed superblock management. The key determines whether we need to
create a new superblock or can reuse an already existing one. We use the
user namespace of the mount as key. This means a new binfmt_misc
superblock is created once per user namespace creation. Subsequent
mounts of binfmt_misc in the same user namespace will mount the same
binfmt_misc instance. We explicitly do not create a new binfmt_misc
superblock on every binfmt_misc mount as the semantics for
load_misc_binary() line up with the keying model. This also allows us to
retrieve the relevant binfmt_misc instance based on the caller's user
namespace which can be done in a simple (bounded to 32 levels) loop.
Similar to the current binfmt_misc semantics allowing access to the
binary types in the initial binfmt_misc instance we do allow sandboxes
access to their parent's binfmt_misc mounts if they do not have created
a separate binfmt_misc instance.
Overall, this will unblock the use-cases mentioned below and in general
will also allow to support and harden execution of another
architecture's binaries in tight sandboxes. For instance, using the
unshare binary it possible to start a chroot of another architecture and
configure the binfmt_misc interpreter without being root to run the
binaries in this chroot and without requiring the host to modify its
binary type handlers.
Henning had already posted a few experiments in the cover letter at [1].
But here's an additional example where an unprivileged container
registers qemu-user-static binary handlers for various binary types in
its separate binfmt_misc mount and is then seamlessly able to start
containers with a different architecture without affecting the host:
root [lxc monitor] /var/snap/lxd/common/lxd/containers f1
1000000 \_ /sbin/init
1000000 \_ /lib/systemd/systemd-journald
1000000 \_ /lib/systemd/systemd-udevd
1000100 \_ /lib/systemd/systemd-networkd
1000101 \_ /lib/systemd/systemd-resolved
1000000 \_ /usr/sbin/cron -f
1000103 \_ /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
1000000 \_ /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
1000104 \_ /usr/sbin/rsyslogd -n -iNONE
1000000 \_ /lib/systemd/systemd-logind
1000000 \_ /sbin/agetty -o -p -- \u --noclear --keep-baud console 115200,38400,9600 vt220
1000107 \_ dnsmasq --conf-file=/dev/null -u lxc-dnsmasq --strict-order --bind-interfaces --pid-file=/run/lxc/dnsmasq.pid --liste
1000000 \_ [lxc monitor] /var/lib/lxc f1-s390x
1100000 \_ /usr/bin/qemu-s390x-static /sbin/init
1100000 \_ /usr/bin/qemu-s390x-static /lib/systemd/systemd-journald
1100000 \_ /usr/bin/qemu-s390x-static /usr/sbin/cron -f
1100103 \_ /usr/bin/qemu-s390x-static /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-ac
1100000 \_ /usr/bin/qemu-s390x-static /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
1100104 \_ /usr/bin/qemu-s390x-static /usr/sbin/rsyslogd -n -iNONE
1100000 \_ /usr/bin/qemu-s390x-static /lib/systemd/systemd-logind
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud console 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud pts/0 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud pts/1 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud pts/2 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud pts/3 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /lib/systemd/systemd-udevd
[1]: https://lore.kernel.org/all/20191216091220.465626-1-laurent@vivier.eu
[2]: https://discuss.linuxcontainers.org/t/binfmt-misc-permission-denied
[3]: https://discuss.linuxcontainers.org/t/lxd-binfmt-support-for-qemu-static-interpreters
[4]: https://discuss.linuxcontainers.org/t/3-1-0-binfmt-support-service-in-unprivileged-guest-requires-write-access-on-hosts-proc-sys-fs-binfmt-misc
[5]: https://discuss.linuxcontainers.org/t/qemu-user-static-not-working-4-11
Link: https://lore.kernel.org/r/20191216091220.465626-2-laurent@vivier.eu (origin)
Link: https://lore.kernel.org/r/20211028103114.2849140-2-brauner@kernel.org (v1)
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jann Horn <jannh@google.com>
Cc: Henning Schild <henning.schild@siemens.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
/* v2 */
- Serge Hallyn <serge@hallyn.com>:
- Use GFP_KERNEL_ACCOUNT for userspace triggered allocations when a
new binary type handler is registered.
- Christian Brauner <christian.brauner@ubuntu.com>:
- Switch authorship to me. I refused to do that earlier even though
Laurent said I should do so because I think it's genuinely bad form.
But by now I have changed so many things that it'd be unfair to
blame Laurent for any potential bugs in here.
- Add more comments that explain what's going on.
- Rename functions while changing them to better reflect what they are
doing to make the code easier to understand.
- In the first version when a specific binary type handler was removed
either through a write to the entry's file or all binary type
handlers were removed by a write to the binfmt_misc mount's status
file all cleanup work happened during inode eviction.
That includes removal of the relevant entries from entry list. While
that works fine I disliked that model after thinking about it for a
bit. Because it means that there was a window were someone has
already removed a or all binary handlers but they could still be
safely reached from load_misc_binary() when it has managed to take
the read_lock() on the entries list while inode eviction was already
happening. Again, that perfectly benign but it's cleaner to remove
the binary handler from the list immediately meaning that ones the
write to then entry's file or the binfmt_misc status file returns
the binary type cannot be executed anymore. That gives stronger
guarantees to the user.
Following the pattern of io_uring, perf, skb, and bpf, iommfd will use
user->locked_vm for accounting pinned pages. Ensure the value is included
in the struct and export free_uid() as iommufd is modular.
user->locked_vm is the good accounting to use for ulimit because it is
per-user, and the security sandboxing of locked pages is not supposed to
be per-process. Other places (vfio, vdpa and infiniband) have used
mm->pinned_vm and/or mm->locked_vm for accounting pinned pages, but this
is only per-process and inconsistent with the new FOLL_LONGTERM users in
the kernel.
Concurrent work is underway to try to put this in a cgroup, so everything
can be consistent and the kernel can provide a FOLL_LONGTERM limit that
actually provides security.
Link: https://lore.kernel.org/r/7-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rlimit counter is tied to uid in the user_namespace. This allows
rlimit values to be specified in userns even if they are already
globally exceeded by the user. However, the value of the previous
user_namespaces cannot be exceeded.
Changelog
v11:
* Fix issue found by lkp robot.
v8:
* Fix issues found by lkp-tests project.
v7:
* Keep only ucounts for RLIMIT_MEMLOCK checks instead of struct cred.
v6:
* Fix bug in hugetlb_file_setup() detected by trinity.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/970d50c70c71bfd4496e0e8d2a0a32feebebb350.1619094428.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The rlimit counter is tied to uid in the user_namespace. This allows
rlimit values to be specified in userns even if they are already
globally exceeded by the user. However, the value of the previous
user_namespaces cannot be exceeded.
Changelog
v11:
* Revert most of changes to fix performance issues.
v10:
* Fix memory leak on get_ucounts failure.
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/df9d7764dddd50f28616b7840de74ec0f81711a8.1619094428.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The rlimit counter is tied to uid in the user_namespace. This allows
rlimit values to be specified in userns even if they are already
globally exceeded by the user. However, the value of the previous
user_namespaces cannot be exceeded.
To illustrate the impact of rlimits, let's say there is a program that
does not fork. Some service-A wants to run this program as user X in
multiple containers. Since the program never fork the service wants to
set RLIMIT_NPROC=1.
service-A
\- program (uid=1000, container1, rlimit_nproc=1)
\- program (uid=1000, container2, rlimit_nproc=1)
The service-A sets RLIMIT_NPROC=1 and runs the program in container1.
When the service-A tries to run a program with RLIMIT_NPROC=1 in
container2 it fails since user X already has one running process.
We cannot use existing inc_ucounts / dec_ucounts because they do not
allow us to exceed the maximum for the counter. Some rlimits can be
overlimited by root or if the user has the appropriate capability.
Changelog
v11:
* Change inc_rlimit_ucounts() which now returns top value of ucounts.
* Drop inc_rlimit_ucounts_and_test() because the return code of
inc_rlimit_ucounts() can be checked.
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/c5286a8aa16d2d698c222f7532f3d735c82bc6bc.1619094428.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Switch over user namespaces to use the newly introduced common lifetime
counter.
Currently every namespace type has its own lifetime counter which is stored
in the specific namespace struct. The lifetime counters are used
identically for all namespaces types. Namespaces may of course have
additional unrelated counters and these are not altered.
This introduces a common lifetime counter into struct ns_common. The
ns_common struct encompasses information that all namespaces share. That
should include the lifetime counter since its common for all of them.
It also allows us to unify the type of the counters across all namespaces.
Most of them use refcount_t but one uses atomic_t and at least one uses
kref. Especially the last one doesn't make much sense since it's just a
wrapper around refcount_t since 2016 and actually complicates cleanup
operations by having to use container_of() to cast the correct namespace
struct out of struct ns_common.
Having the lifetime counter for the namespaces in one place reduces
maintenance cost. Not just because after switching all namespaces over we
will have removed more code than we added but also because the logic is
more easily understandable and we indicate to the user that the basic
lifetime requirements for all namespaces are currently identical.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/159644979754.604812.601625186726406922.stgit@localhost.localdomain
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pull keyring namespacing from David Howells:
"These patches help make keys and keyrings more namespace aware.
Firstly some miscellaneous patches to make the process easier:
- Simplify key index_key handling so that the word-sized chunks
assoc_array requires don't have to be shifted about, making it
easier to add more bits into the key.
- Cache the hash value in the key so that we don't have to calculate
on every key we examine during a search (it involves a bunch of
multiplications).
- Allow keying_search() to search non-recursively.
Then the main patches:
- Make it so that keyring names are per-user_namespace from the point
of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not
accessible cross-user_namespace.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this.
- Move the user and user-session keyrings to the user_namespace
rather than the user_struct. This prevents them propagating
directly across user_namespaces boundaries (ie. the KEY_SPEC_*
flags will only pick from the current user_namespace).
- Make it possible to include the target namespace in which the key
shall operate in the index_key. This will allow the possibility of
multiple keys with the same description, but different target
domains to be held in the same keyring.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this.
- Make it so that keys are implicitly invalidated by removal of a
domain tag, causing them to be garbage collected.
- Institute a network namespace domain tag that allows keys to be
differentiated by the network namespace in which they operate. New
keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned
the network domain in force when they are created.
- Make it so that the desired network namespace can be handed down
into the request_key() mechanism. This allows AFS, NFS, etc. to
request keys specific to the network namespace of the superblock.
This also means that the keys in the DNS record cache are
thenceforth namespaced, provided network filesystems pass the
appropriate network namespace down into dns_query().
For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other
cache keyrings, such as idmapper keyrings, also need to set the
domain tag - for which they need access to the network namespace of
the superblock"
* tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Pass the network namespace into request_key mechanism
keys: Network namespace domain tag
keys: Garbage collect keys for which the domain has been removed
keys: Include target namespace in match criteria
keys: Move the user and user-session keyrings to the user_namespace
keys: Namespace keyring names
keys: Add a 'recurse' flag for keyring searches
keys: Cache the hash value to avoid lots of recalculation
keys: Simplify key description management
Move the user and user-session keyrings to the user_namespace struct rather
than pinning them from the user_struct struct. This prevents these
keyrings from propagating across user-namespaces boundaries with regard to
the KEY_SPEC_* flags, thereby making them more useful in a containerised
environment.
The issue is that a single user_struct may be represent UIDs in several
different namespaces.
The way the patch does this is by attaching a 'register keyring' in each
user_namespace and then sticking the user and user-session keyrings into
that. It can then be searched to retrieve them.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jann Horn <jannh@google.com>
Keyring names are held in a single global list that any process can pick
from by means of keyctl_join_session_keyring (provided the keyring grants
Search permission). This isn't very container friendly, however.
Make the following changes:
(1) Make default session, process and thread keyring names begin with a
'.' instead of '_'.
(2) Keyrings whose names begin with a '.' aren't added to the list. Such
keyrings are system specials.
(3) Replace the global list with per-user_namespace lists. A keyring adds
its name to the list for the user_namespace that it is currently in.
(4) When a user_namespace is deleted, it just removes itself from the
keyring name list.
The global keyring_name_lock is retained for accessing the name lists.
This allows (4) to work.
This can be tested by:
# keyctl newring foo @s
995906392
# unshare -U
$ keyctl show
...
995906392 --alswrv 65534 65534 \_ keyring: foo
...
$ keyctl session foo
Joined session keyring: 935622349
As can be seen, a new session keyring was created.
The capability bit KEYCTL_CAPS1_NS_KEYRING_NAME is set if the kernel is
employing this feature.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each read from a file in efivarfs results in two calls to EFI
(one to get the file size, another to get the actual data).
On X86 these EFI calls result in broadcast system management
interrupts (SMI) which affect performance of the whole system.
A malicious user can loop performing reads from efivarfs bringing
the system to its knees.
Linus suggested per-user rate limit to solve this.
So we add a ratelimit structure to "user_struct" and initialize
it for the root user for no limit. When allocating user_struct for
other users we set the limit to 100 per second. This could be used
for other places that want to limit the rate of some detrimental
user action.
In efivarfs if the limit is exceeded when reading, we take an
interruptible nap for 50ms and check the rate limit again.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add a struct containing two pointer to extents and wrap both the static extent
array and the struct into a union. This is done in preparation for bumping the
{g,u}idmap limits for user namespaces.
- Add brackets around anonymous union when using designated initializers to
initialize members in order to please gcc <= 4.4.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
We are going to split <linux/sched/user.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/user.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull user namespace related fixes from Eric Biederman:
"As these are bug fixes almost all of thes changes are marked for
backporting to stable.
The first change (implicitly adding MNT_NODEV on remount) addresses a
regression that was created when security issues with unprivileged
remount were closed. I go on to update the remount test to make it
easy to detect if this issue reoccurs.
Then there are a handful of mount and umount related fixes.
Then half of the changes deal with the a recently discovered design
bug in the permission checks of gid_map. Unix since the beginning has
allowed setting group permissions on files to less than the user and
other permissions (aka ---rwx---rwx). As the unix permission checks
stop as soon as a group matches, and setgroups allows setting groups
that can not later be dropped, results in a situtation where it is
possible to legitimately use a group to assign fewer privileges to a
process. Which means dropping a group can increase a processes
privileges.
The fix I have adopted is that gid_map is now no longer writable
without privilege unless the new file /proc/self/setgroups has been
set to permanently disable setgroups.
The bulk of user namespace using applications even the applications
using applications using user namespaces without privilege remain
unaffected by this change. Unfortunately this ix breaks a couple user
space applications, that were relying on the problematic behavior (one
of which was tools/selftests/mount/unprivileged-remount-test.c).
To hopefully prevent needing a regression fix on top of my security
fix I rounded folks who work with the container implementations mostly
like to be affected and encouraged them to test the changes.
> So far nothing broke on my libvirt-lxc test bed. :-)
> Tested with openSUSE 13.2 and libvirt 1.2.9.
> Tested-by: Richard Weinberger <richard@nod.at>
> Tested on Fedora20 with libvirt 1.2.11, works fine.
> Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
> Ok, thanks - yes, unprivileged lxc is working fine with your kernels.
> Just to be sure I was testing the right thing I also tested using
> my unprivileged nsexec testcases, and they failed on setgroup/setgid
> as now expected, and succeeded there without your patches.
> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
> I tested this with Sandstorm. It breaks as is and it works if I add
> the setgroups thing.
> Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :("
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Unbreak the unprivileged remount tests
userns; Correct the comment in map_write
userns: Allow setting gid_maps without privilege when setgroups is disabled
userns: Add a knob to disable setgroups on a per user namespace basis
userns: Rename id_map_mutex to userns_state_mutex
userns: Only allow the creator of the userns unprivileged mappings
userns: Check euid no fsuid when establishing an unprivileged uid mapping
userns: Don't allow unprivileged creation of gid mappings
userns: Don't allow setgroups until a gid mapping has been setablished
userns: Document what the invariant required for safe unprivileged mappings.
groups: Consolidate the setgroups permission checks
mnt: Clear mnt_expire during pivot_root
mnt: Carefully set CL_UNPRIVILEGED in clone_mnt
mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.
umount: Do not allow unmounting rootfs.
umount: Disallow unprivileged mount force
mnt: Update unprivileged remount test
mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
- Expose the knob to user space through a proc file /proc/<pid>/setgroups
A value of "deny" means the setgroups system call is disabled in the
current processes user namespace and can not be enabled in the
future in this user namespace.
A value of "allow" means the segtoups system call is enabled.
- Descendant user namespaces inherit the value of setgroups from
their parents.
- A proc file is used (instead of a sysctl) as sysctls currently do
not allow checking the permissions at open time.
- Writing to the proc file is restricted to before the gid_map
for the user namespace is set.
This ensures that disabling setgroups at a user namespace
level will never remove the ability to call setgroups
from a process that already has that ability.
A process may opt in to the setgroups disable for itself by
creating, entering and configuring a user namespace or by calling
setns on an existing user namespace with setgroups disabled.
Processes without privileges already can not call setgroups so this
is a noop. Prodcess with privilege become processes without
privilege when entering a user namespace and as with any other path
to dropping privilege they would not have the ability to call
setgroups. So this remains within the bounds of what is possible
without a knob to disable setgroups permanently in a user namespace.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
