Move cec_get/put_device to the media/cec.h header. This
allows CEC drivers to use this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_subdev_link_validate() helper function is meant to be used as a
drop-in implementation of a V4L2 subdev entity .link_validate() handler.
It supports subdev-to-subdev links only, and complains if one end of the
link is not a subdev. This forces drivers that have video output devices
connected to subdevs to implement a custom .link_validate() handler,
calling v4l2_subdev_link_validate() for the subdev-to-subdev links, and
performing manual link validation for the video-to-subdev links.
Video devices embed a media entity, and therefore also have a
.link_validate() operation. For video capture devices, the operation
should be manually implemented by drivers for validate the
subdev-to-video links. For video output devices, on the other hand, that
operation is never called, as link validation is performed in the
context of the sink entity.
As a result, we end up forcing drivers to implement a custom
.link_validate() handler for subdevs connected to video output devices,
when the video devices provide an operation that could be used for that
purpose.
To improve that situation, make v4l2_subdev_link_validate() delegate
link validation to the source's .link_validate() operation when the link
source is a video device and the link sink is a subdev. This allows
broader usage of v4l2_subdev_link_validate(), and simplifies drivers by
making video device link validation easy to implement in the video
device .link_validate(), regardless of whether the video device is an
output device or a capture device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
When multiple planes use the same dma buf, each plane will have its own dma
buf attachment and mapping. It is a waste of IOVA space.
This patch adds a dbuf_duplicated boolean in vb2_plane. If a plane's dbuf
is the same as an existing plane, do not create another attachment and
mapping.
Signed-off-by: Yunke Cao <yunkec@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If this flag is set, then the reply is expected to consist of
the CEC_MSG_VENDOR_COMMAND_WITH_ID opcode followed by the Vendor ID (as
used in bytes 1-4 of the message), followed by the struct cec_msg reply
field.
Note that this assumes that the byte after the Vendor ID is a
vendor-specific opcode.
This flag makes it easier to wait for replies to vendor commands,
using the same CEC framework support for waiting for regular replies.
Support for this flag is indicated by setting the new
CEC_CAP_REPLY_VENDOR_ID capability.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The tx_resolution field is never read. In theory you can imagine this
field being useful for detecting whether the transmitter has the
resolution for the message you are trying to send, but I am not aware of
any hardware where this could be an issue.
Just remove.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add keymap for the simple IR (RC-5) remote that comes with the
MyGica UTV3 Analog USB2.0 TV Box video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tuner ranges were determined by USB capturing the vendor driver of a
MyGica UTV3 video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Export reference quantization and huffman tables as provided in ITU-T.81 so
that they can be re-used by other JPEG drivers.
These are example tables provided in ITU-T.81 as reference tables and the
JPEG encoders are free to use either these or their own proprietary tables.
Also add necessary prefixes to be used for huffman tables in global header
file.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It would be useful to mark instances of v4l2_subdev_state structures as
const when code needs to access them read-only. This isn't currently
possible, as the v4l2_subdev_state_get_*() accessor functions take a
non-const pointer to the state.
Use _Generic() to provide two different versions of the accessors, for
const and non-const states respectively. The former returns a const
pointer to the requested format, rectangle or interval, implementing
const-correctness. The latter returns a non-const pointer, preserving
the current behaviour for drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Drop the word "below" from the text.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
v4l2_subdev_enable/disable_streams_fallback() supports falling back to
.s_stream() for subdevs with a single source pad. It also tracks the
enabled streams for that one pad in the sd->enabled_streams field.
Tracking the enabled streams with sd->enabled_streams does not make
sense, as with .s_stream() there can only be a single stream per pad.
Thus, as the v4l2_subdev_enable/disable_streams_fallback() only supports
a single source pad, all we really need is a boolean which tells whether
streaming has been enabled on this pad or not.
However, as we only need a true/false state for a pad (instead of
tracking which streams have been enabled for a pad), we can easily
extend the fallback mechanism to support multiple source pads as we only
need to keep track of which pads have been enabled.
Change the sd->enabled_streams field to sd->enabled_pads, which is a
64-bit bitmask tracking the enabled source pads. With this change we can
remove the restriction that
v4l2_subdev_enable/disable_streams_fallback() only supports a single
source pad.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
call_s_stream() uses sd->enabled_streams to track whether streaming has
already been enabled. However,
v4l2_subdev_enable/disable_streams_fallback(), which was the original
user of this field, already uses it, and
v4l2_subdev_enable/disable_streams_fallback() will call call_s_stream().
This leads to a conflict as both functions set the field. Afaics, both
functions set the field to the same value, so it won't cause a runtime
bug, but it's still wrong and if we, e.g., change how
v4l2_subdev_enable/disable_streams_fallback() operates we might easily
cause bugs.
Fix this by adding a new field, 's_stream_enabled', for
call_s_stream().
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
is_claiming_log_addrs documentation was missing.
fix this kernel-doc warning:
include/media/cec.h:296: warning: Function parameter or struct member 'is_claiming_log_addrs' not described in 'cec_adapter'
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a header for the PCI device table of all IPU6 devices. This will be
used by the IPU bridge as well so place the table in a header.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add two new functions, v4l2_subdev_lock_states() and
v4l2_subdev_unclock_states(), to acquire and release the state of two
sub-devices. They differ from calling v4l2_subdev_{un,}lock_state() so
that if the two states share the same lock, the lock is acquired only
once.
Also use the new functions in v4l2_subdev_link_validate().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set the owner field of the async sub-devices by making
v4l2_async_register_subdev() a macro and obtaining THIS_MODULE that way.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
