dasharo/linux
0
0
Fork 0
mirror of https://github.com/Dasharo/linux.git synced 2026-03-06 15:25:10 -08:00
Code Issues Packages Projects Releases Wiki Activity
1,309,125 Commits 2 Branches 0 Tags
4563243edeeb3dc17355a80ec16bbfdc675702cb
Commit Graph

884 Commits

Author SHA1 Message Date
Krzysztof Kozlowski
32960b4f25 memory: pl353-smc: simplify with scoped for each OF child loop 
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.

Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240825135001.48963-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-31 07:44:24 +02:00
Krzysztof Kozlowski
331b8a9631 memory: pl172: simplify releasing AMBA regions with devm 
Use devm_add_action_or_reset() and dev_err_probe() to make the probe()
error handling simpler around amba_release_regions() cleanup.  This
allows to drop the remove() callback entirely.

Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240825135001.48963-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-31 07:44:23 +02:00
Biju Das
84d1078af5 memory: renesas-rpc-if: Use Hi-Z state as the default setting for IOVF pins 
The RZ/{G2L,G2LC,V2L} SMARC EVK uses Micron MT25QU412A flash and RZ/G2UL
SMARC EVK uses Renesas AT25QL128A flash. With current pin setting for
IOVF pin, 4-bit flash write fails for AT25QL128A flash. Use Hi-Z state
as the default for IOVF pin, so that spi controller driver in linux will
be independent of flash type.

To support this, during board production, the bit 4 of the NV config
register must be cleared by the bootloader for Micron flash.

Output from u-boot after clearing bit4 of NVCR register.
=> renesas_micron_flash_nvcr
SF: Detected mt25qu512a with page size 256 Bytes, erase size 64 KiB, total 64 MiB
NVCR=0xef

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240830203014.199326-2-biju.das.jz@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-31 07:30:32 +02:00
Rong Qianfeng
ff390189b7 memory: mtk-smi: Use devm_clk_get_enabled() 
Replace devm_clk_get() and clk_prepare_enable() with
devm_clk_get_enabled() in .probe().

Fix the bug of missing clk_disable_unprepare() in .remove() by
using devm_clk_get_enabled() that can disables and unprepares
it automatically on driver detach.

Fixes: 3c8f4ad85c ("memory/mediatek: add support for mt2701")
Cc: honghui.zhang@mediatek.com
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20240821032558.43052-1-rongqianfeng@vivo.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 11:02:17 +02:00
Krzysztof Kozlowski
ce536578e5 memory: pl353-smc: simplify with devm_clk_get_enabled() 
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
make code simpler.

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-7-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 11:02:16 +02:00
Krzysztof Kozlowski
49ee2e842a memory: pl353-smc: simplify with dev_err_probe() 
Use dev_err_probe() to avoid dmesg flood on actual defer.  This makes
the code also simpler.

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-6-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 11:02:16 +02:00
Krzysztof Kozlowski
610395de84 memory: pl172: simplify with devm_clk_get_enabled() 
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
make code simpler.  Change to dev_err_probe() in handling clk_get_rate()
error to make it even simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-5-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 11:02:16 +02:00
Krzysztof Kozlowski
8f3cb397cb memory: pl172: simplify with dev_err_probe() 
Use dev_err_probe() to avoid dmesg flood on actual defer.  This makes
the code also simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-4-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 11:02:15 +02:00
Krzysztof Kozlowski
c93ad423ed memory: omap-gpmc: simplify locking with guard() 
Simplify error handling (less gotos) over locks with guard().

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-3-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 11:02:15 +02:00
Krzysztof Kozlowski
f1619986d7 memory: emif: simplify locking with guard() 
Simplify error handling (less gotos) over locks with guard().

The driver used file-scope variable 'irq_state' for storing IRQ state
with spin_lock_irqsave, so move it into respective local scopes.  This
should be equivalent, but more readable (less global variables).

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-2-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 11:02:15 +02:00
Krzysztof Kozlowski
99602b4d30 memory: emif: drop unused 'irq_state' member 
Driver does not use 'emif_data.irq_state'.

Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-1-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 11:02:09 +02:00
Bartosz Golaszewski
c7d2f3fbdf memory: ti-aemif: Revert "memory: ti-aemif: don't needlessly iterate over child nodes" 
This reverts commit 23a641d5c2.

The first-level children of the aemif node are not the device nodes (ones
containing the 'compatible' property) but the chip-select nodes which
instead have their own children.

of_platform_populate() will skip such nodes so we must indeed iterate
over the direct children of the aemif node. The problem here is that we
never call of_platform_depopulate() as it takes the root device as
argument. We only have an unpopulated chip-select nodes so we will leak
these devices if any of the calls to of_platform_populate() fails.

I don't have a batter idea right now but my patch was not correct so we
need to revert it. While at it: at least use the scoped variant of the
OF node iterator. Down the line, we should find a better solution to fix
this potential resource leak in error path.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240824080235.56472-1-brgl@bgdev.pl
Fixes: 23a641d5c2 ("memory: ti-aemif: don't needlessly iterate over child nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-25 10:24:23 +02:00
Krzysztof Kozlowski
5e8431f722 memory: ti-aemif: simplify with scoped for each OF child loop 
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-13-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:41:00 +02:00
Krzysztof Kozlowski
82986f5cdd memory: ti-aemif: simplify with dev_err_probe() 
Use dev_err_probe() to avoid dmesg flood on actual defer.  This makes
the code also simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-11-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:41:00 +02:00
Krzysztof Kozlowski
c7f67fec17 memory: tegra30-emc: simplify with scoped for each OF child loop 
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-10-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:35 +02:00
Krzysztof Kozlowski
818902cb74 memory: tegra20-emc: simplify with scoped for each OF child loop 
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-9-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:35 +02:00
Krzysztof Kozlowski
2bc48f6971 memory: tegra124-emc: simplify with scoped for each OF child loop 
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-8-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:34 +02:00
Krzysztof Kozlowski
210059143b memory: tegra-mc: simplify with scoped for each OF child loop 
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-7-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:34 +02:00
Krzysztof Kozlowski
4c1a381a9e memory: stm32-fmc2-ebi: simplify with dev_err_probe() 
dev_err_probe() combines 'return' and error code printing, thus code is
a bit simpler, even if it cannot actually defer.

Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-6-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:33 +02:00
Krzysztof Kozlowski
48ec68281d memory: stm32-fmc2-ebi: simplify with scoped for each OF child loop 
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-5-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:33 +02:00
Krzysztof Kozlowski
e2cc3ddaec memory: samsung: exynos5422-dmc: use scoped device node handling to simplify error paths 
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-4-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:33 +02:00
Krzysztof Kozlowski
2af13f97fc memory: samsung: exynos5422-dmc: simplify dmc->dev usage 
Store 'dmc->dev' in local 'dev' variable, to make several pieces of code
using it shorter and easier to read.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-3-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:32 +02:00
Krzysztof Kozlowski
50e40b7159 memory: atmel-ebi: simplify with scoped for each OF child loop 
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-2-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:32 +02:00
Krzysztof Kozlowski
d47d52554d memory: atmel-ebi: use scoped device node handling to simplify error paths 
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240816-cleanup-h-of-node-put-memory-v2-1-9eed0ee16b78@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-21 13:23:32 +02:00
Krzysztof Kozlowski
67dd9e861a memory: tegra186-emc: drop unused to_tegra186_emc() 
to_tegra186_emc() is not used, W=1 builds:

  tegra186-emc.c:38:36: error: unused function 'to_tegra186_emc' [-Werror,-Wunused-function]

Fixes: 9a38cb2766 ("memory: tegra: Add interconnect support for DRAM scaling in Tegra234")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240812123055.124123-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 2024-08-14 16:16:41 +02:00