Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
If an input device declares too many capability bits then modalias
string for such device may become too long and not fit into uevent
buffer, resulting in failure of sending said uevent. This, in turn,
may prevent userspace from recognizing existence of such devices.
This is typically not a concern for real hardware devices as they have
limited number of keys, but happen with synthetic devices such as
ones created by xen-kbdfront driver, which creates devices as being
capable of delivering all possible keys, since it doesn't know what
keys the backend may produce.
To deal with such devices input core will attempt to trim key data,
in the hope that the rest of modalias string will fit in the given
buffer. When trimming key data it will indicate that it is not
complete by placing "+," sign, resulting in conversions like this:
old: k71,72,73,74,78,7A,7B,7C,7D,8E,9E,A4,AD,E0,E1,E4,F8,174,
new: k71,72,73,74,78,7A,7B,7C,+,
This should allow existing udev rules continue to work with existing
devices, and will also allow writing more complex rules that would
recognize trimmed modalias and check input device characteristics by
other means (for example by parsing KEY= data in uevent or parsing
input device sysfs attributes).
Note that the driver core may try adding more uevent environment
variables once input core is done adding its own, so when forming
modalias we can not use the entire available buffer, so we reduce
it by somewhat an arbitrary amount (96 bytes).
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Link: https://lore.kernel.org/r/ZjAWMQCJdrxZkvkB@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
input_abs_set_val() can nominally call input_alloc_absinfo() which may
allocate memory with GFP_KERNEL flag. This does not happen when
input_abs_set_val() is called by the input core to set current MT slot when
handling a new input event, but it trips certain static analyzers.
Rearrange the code to access the relevant structures directly.
Reported-by: Teng Qi <starmiku1207184332@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://lore.kernel.org/r/ZFBg379uuHjf+YEM@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov:
- a set of tweaks to iqs269a touch controller driver
- a fix for ads7846 driver to properly handle 7845 chip
- cap11xx driver will support cap1203, cap1293 and cap1298 models
- xpad driver will support 8BitDo Pro 2 Wired Controller
- input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and
pm_sleep_ptr()
- other miscellaneous fixes and tweaks
* tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits)
dt-bindings: input: iqs626a: Redefine trackpad property types
Input: iqs626a - drop unused device node references
dt-bindings: input: touchscreen: st,stmfts: convert to dtschema
Input: cyttsp5 - fix bitmask for touch buttons
Input: exc3000 - properly stop timer on shutdown
Input: synaptics-rmi4 - fix SPI device ID
Input: cap11xx - add support for cap1203, cap1293 and cap1298
dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298
Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation
Input: edt-ft5x06 - fix typo in a comment
Input: tegra-kbc - use devm_platform_get_and_ioremap_resource()
Input: st-keyscan - use devm_platform_get_and_ioremap_resource()
Input: spear-keyboard - use devm_platform_get_and_ioremap_resource()
Input: olpc_apsp - use devm_platform_get_and_ioremap_resource()
Input: arc_ps2 - use devm_platform_get_and_ioremap_resource()
Input: apbps2 - use devm_platform_get_and_ioremap_resource()
Input: altera_ps2 - use devm_platform_get_and_ioremap_resource()
Input: ads7846 - don't check penirq immediately for 7845
Input: ads7846 - always set last command to PWRDOWN
Input: ads7846 - don't report pressure for ads7845
...
As the new pm_sleep_ptr() macro lets the compiler see the code, but
then remove it if !CONFIG_PM_SLEEP it can be used to avoid the need
for #ifdef guards. Use that in the input core to simplify the code
a little. Note pm_sleep_ptr() has not been applied to each callback
in the ops structure because the pm_sleep_ptr() at the usage site
is sufficient.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230114171620.42891-15-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
When inhibiting or suspending a device we are sending release events for
all currently held keys and buttons, however we retain active MT slot
state, which causes issues with gesture recognition when we resume or
uninhibit.
Let's fix it by introducing, in addition to input_dev_release_keys(),
nput_mt_release_slots() that will deactivate all currently active slots.
Signed-off-by: Angela Czubak <acz@semihalf.com>
Link: https://lore.kernel.org/r/20220718151715.1052842-3-acz@semihalf.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We should not be passing synthetic events (such as autorepeat events)
out of order with the events coming from the hardware device, but rather
add them to pending events and flush them all at once.
This also fixes an issue with timestamps for key release events carrying
stale data from the previous autorepeat event.
Reviewed-by: Angela Czubak <acz@semihalf.com>
Link: https://lore.kernel.org/r/YszNfq4b6MkeoCJC@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
