Zac reported a verification failure and Alexei reproduced the issue
with a simple reproducer ([1]). The verification failure is due to missed
setting for var_off.
The following is the reproducer in [1]:
0: R1=ctx() R10=fp0
0: (71) r3 = *(u8 *)(r10 -387) ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R10=fp0
1: (bc) w7 = (s8)w3 ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
R7_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=127,var_off=(0x0; 0x7f))
2: (36) if w7 >= 0x2533823b goto pc-3
mark_precise: frame0: last_idx 2 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r7 stack= before 1: (bc) w7 = (s8)w3
mark_precise: frame0: regs=r3 stack= before 0: (71) r3 = *(u8 *)(r10 -387)
2: R7_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=127,var_off=(0x0; 0x7f))
3: (b4) w0 = 0 ; R0_w=0
4: (95) exit
Note that after insn 1, the var_off for R7 is (0x0; 0x7f). This is not correct
since upper 24 bits of w7 could be 0 or 1. So correct var_off should be
(0x0; 0xffffffff). Missing var_off setting in set_sext32_default_val() caused later
incorrect analysis in zext_32_to_64(dst_reg) and reg_bounds_sync(dst_reg).
To fix the issue, set var_off correctly in set_sext32_default_val(). The correct
reg state after insn 1 becomes:
1: (bc) w7 = (s8)w3 ;
R3_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
R7_w=scalar(smin=0,smax=umax=0xffffffff,smin32=-128,smax32=127,var_off=(0x0; 0xffffffff))
and at insn 2, the verifier correctly determines either branch is possible.
[1] https://lore.kernel.org/bpf/CAADnVQLPU0Shz7dWV4bn2BgtGdxN3uFHPeobGBA72tpg5Xoykw@mail.gmail.com/
Fixes: 8100928c88 ("bpf: Support new sign-extension mov insns")
Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240615174626.3994813-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-14
We've added 8 non-merge commits during the last 2 day(s) which contain
a total of 9 files changed, 92 insertions(+), 11 deletions(-).
The main changes are:
1) Silence a syzkaller splat under CONFIG_DEBUG_NET=y in pskb_pull_reason()
triggered via __bpf_try_make_writable(), from Florian Westphal.
2) Fix removal of kfuncs during linking phase which then throws a kernel
build warning via resolve_btfids about unresolved symbols,
from Tony Ambardar.
3) Fix a UML x86_64 compilation failure from BPF as pcpu_hot symbol
is not available on User Mode Linux, from Maciej Żenczykowski.
4) Fix a register corruption in reg_set_min_max triggering an invariant
violation in BPF verifier, from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Harden __bpf_kfunc tag against linker kfunc removal
compiler_types.h: Define __retain for __attribute__((__retain__))
bpf: Avoid splat in pskb_pull_reason
bpf: fix UML x86_64 compile failure
selftests/bpf: Add test coverage for reg_set_min_max handling
bpf: Reduce stack consumption in check_stack_write_fixed_off
bpf: Fix reg_set_min_max corruption of fake_reg
MAINTAINERS: mailmap: Update Stanislav's email address
====================
Link: https://lore.kernel.org/r/20240614203223.26500-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Juan reported that after doing some changes to buzzer [0] and implementing
a new fuzzing strategy guided by coverage, they noticed the following in
one of the probes:
[...]
13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar()
14: (b7) r0 = 0 ; R0_w=0
15: (b4) w0 = -1 ; R0_w=0xffffffff
16: (74) w0 >>= 1 ; R0_w=0x7fffffff
17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff))
18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd))
19: (56) if w6 != 0x7ffffffd goto pc+1
REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0)
REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0)
19: R6_w=0x7fffffff
20: (95) exit
from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd))
22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd))
23: (95) exit
from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm
24: (14) w6 -= 14 ; R6_w=0
[...]
What can be seen here is a register invariant violation on line 19. After
the binary-or in line 18, the verifier knows that bit 2 is set but knows
nothing about the rest of the content which was loaded from a map value,
meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in
line 19 the verifier analyzes the branch, it splits the register states
in reg_set_min_max() into the registers of the true branch (true_reg1,
true_reg2) and the registers of the false branch (false_reg1, false_reg2).
Since the test is w6 != 0x7ffffffd, the src_reg is a known constant.
Internally, the verifier creates a "fake" register initialized as scalar
to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now,
for line 19, it is mathematically impossible to take the false branch of
this program, yet the verifier analyzes it. It is impossible because the
second bit of r6 will be set due to the prior or operation and the
constant in the condition has that bit unset (hex(fd) == binary(1111 1101).
When the verifier first analyzes the false / fall-through branch, it will
compute an intersection between the var_off of r6 and of the constant. This
is because the verifier creates a "fake" register initialized to the value
of the constant. The intersection result later refines both registers in
regs_refine_cond_op():
[...]
t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off));
reg1->var_off = tnum_with_subreg(reg1->var_off, t);
reg2->var_off = tnum_with_subreg(reg2->var_off, t);
[...]
Since the verifier is analyzing the false branch of the conditional jump,
reg1 is equal to false_reg1 and reg2 is equal to false_reg2, i.e. the reg2
is the "fake" register that was meant to hold a constant value. The resulting
var_off of the intersection says that both registers now hold a known value
of var_off=(0x7fffffff, 0x0) or in other words: this operation manages to
make the verifier think that the "constant" value that was passed in the
jump operation now holds a different value.
Normally this would not be an issue since it should not influence the true
branch, however, false_reg2 and true_reg2 are pointers to the same "fake"
register. Meaning, the false branch can influence the results of the true
branch. In line 24, the verifier assumes R6_w=0, but the actual runtime
value in this case is 1. The fix is simply not passing in the same "fake"
register location as inputs to reg_set_min_max(), but instead making a
copy. Moving the fake_reg into the env also reduces stack consumption by
120 bytes. With this, the verifier successfully rejects invalid accesses
from the test program.
[0] https://github.com/google/buzzer
Fixes: 67420501e8 ("bpf: generalize reg_set_min_max() to handle non-const register comparisons")
Reported-by: Juan José López Jaimez <jjlopezjaimez@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240613115310.25383-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull perf event fix from Ingo Molnar:
"Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks"
* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing wakeup when waiting for context reference
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF and big collection of fixes for WiFi core and
drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src
addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the
same UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from
control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the
old behavior for two cases where we started coalescing those
messages with normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting to
6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"
* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
selftests: net: lib: set 'i' as local
selftests: net: lib: avoid error removing empty netns name
selftests: net: lib: support errexit with busywait
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
ipv6: fix possible race in __fib6_drop_pcpu_from()
af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
af_unix: Annotate data-races around sk->sk_sndbuf.
af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
af_unix: Annotate data-race of sk->sk_state in unix_accept().
af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
af_unix: Annodate data-races around sk->sk_state for writers.
af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
...
In our production environment, we found many hung tasks which are
blocked for more than 18 hours. Their call traces are like this:
[346278.191038] __schedule+0x2d8/0x890
[346278.191046] schedule+0x4e/0xb0
[346278.191049] perf_event_free_task+0x220/0x270
[346278.191056] ? init_wait_var_entry+0x50/0x50
[346278.191060] copy_process+0x663/0x18d0
[346278.191068] kernel_clone+0x9d/0x3d0
[346278.191072] __do_sys_clone+0x5d/0x80
[346278.191076] __x64_sys_clone+0x25/0x30
[346278.191079] do_syscall_64+0x5c/0xc0
[346278.191083] ? syscall_exit_to_user_mode+0x27/0x50
[346278.191086] ? do_syscall_64+0x69/0xc0
[346278.191088] ? irqentry_exit_to_user_mode+0x9/0x20
[346278.191092] ? irqentry_exit+0x19/0x30
[346278.191095] ? exc_page_fault+0x89/0x160
[346278.191097] ? asm_exc_page_fault+0x8/0x30
[346278.191102] entry_SYSCALL_64_after_hwframe+0x44/0xae
The task was waiting for the refcount become to 1, but from the vmcore,
we found the refcount has already been 1. It seems that the task didn't
get woken up by perf_event_release_kernel() and got stuck forever. The
below scenario may cause the problem.
Thread A Thread B
... ...
perf_event_free_task perf_event_release_kernel
...
acquire event->child_mutex
...
get_ctx
... release event->child_mutex
acquire ctx->mutex
...
perf_free_event (acquire/release event->child_mutex)
...
release ctx->mutex
wait_var_event
acquire ctx->mutex
acquire event->child_mutex
# move existing events to free_list
release event->child_mutex
release ctx->mutex
put_ctx
... ...
In this case, all events of the ctx have been freed, so we couldn't
find the ctx in free_list and Thread A will miss the wakeup. It's thus
necessary to add a wakeup after dropping the reference.
Fixes: 1cf8dfe8a6 ("perf/core: Fix race between close() and fork()")
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240513103948.33570-1-haifeng.xu@shopee.com
Pull Kbuild fixes from Masahiro Yamada:
- Fix a Kconfig bug regarding comparisons to 'm' or 'n'
- Replace missed $(srctree)/$(src)
- Fix unneeded kallsyms step 3
- Remove incorrect "compatible" properties from image nodes in
image.fit
- Improve gen_kheaders.sh
- Fix 'make dt_binding_check'
- Clean up unnecessary code
* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
kheaders: use `command -v` to test for existence of `cpio`
kheaders: explicitly define file modes for archived headers
scripts/make_fit: Drop fdt image entry compatible string
kbuild: remove a stale comment about cleaning in link-vmlinux.sh
kbuild: fix short log for AS in link-vmlinux.sh
kbuild: change scripts/mksysmap into sed script
kbuild: avoid unneeded kallsyms step 3
kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
kconfig: remove redundant check in expr_join_or()
kconfig: fix comparison to constant symbols, 'm', 'n'
kconfig: remove unused expr_is_no()
Pull dma-mapping fixes from Christoph Hellwig:
- dma-mapping benchmark error handling fixes (Fedor Pchelkin)
- correct a config symbol reference in the DMA API documentation (Lukas
Bulwahn)
* tag 'dma-mapping-6.10-2024-05-31' of git://git.infradead.org/users/hch/dma-mapping:
Documentation/core-api: correct reference to SWIOTLB_DYNAMIC
dma-mapping: benchmark: handle NUMA_NO_NODE correctly
dma-mapping: benchmark: fix node id validation
dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
dma-mapping: benchmark: fix up kthread-related error handling
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- gro: initialize network_offset in network layer
- tcp: reduce accepted window in NEW_SYN_RECV state
Current release - new code bugs:
- eth: mlx5e: do not use ptp structure for tx ts stats when not
initialized
- eth: ice: check for unregistering correct number of devlink params
Previous releases - regressions:
- bpf: Allow delete from sockmap/sockhash only if update is allowed
- sched: taprio: extend minimum interval restriction to entire cycle
too
- netfilter: ipset: add list flush to cancel_gc
- ipv4: fix address dump when IPv4 is disabled on an interface
- sock_map: avoid race between sock_map_close and sk_psock_put
- eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
status rules
Previous releases - always broken:
- core: fix __dst_negative_advice() race
- bpf:
- fix multi-uprobe PID filtering logic
- fix pkt_type override upon netkit pass verdict
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"
* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
netdev: add qstat for csum complete
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
net: ena: Fix redundant device NUMA node override
ice: check for unregistering correct number of devlink params
ice: fix 200G PHY types to link speed mapping
i40e: Fully suspend and resume IO operations in EEH case
i40e: factoring out i40e_suspend/i40e_resume
e1000e: move force SMBUS near the end of enable_ulp function
net: dsa: microchip: fix RGMII error in KSZ DSA driver
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
net: fix __dst_negative_advice() race
nfc/nci: Add the inconsistency check between the input data length and count
MAINTAINERS: dwmac: starfive: update Maintainer
net/sched: taprio: extend minimum interval restriction to entire cycle too
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
net: ti: icssg-prueth: Fix start counter for ft1 filter
sock_map: avoid race between sock_map_close and sk_psock_put
...
Commit 13e1df0928 ("kheaders: explicitly validate existence of cpio
command") added an explicit check for `cpio` using `type`.
However, `type` in `dash` (which is used in some popular distributions
and base images as the shell script runner) prints the missing message
to standard output, and thus no error is printed:
$ bash -c 'type missing >/dev/null'
bash: line 1: type: missing: not found
$ dash -c 'type missing >/dev/null'
$
For instance, this issue may be seen by loongarch builders, given its
defconfig enables CONFIG_IKHEADERS since commit 9cc1df421f ("LoongArch:
Update Loongson-3 default config file").
Therefore, use `command -v` instead to have consistent behavior, and
take the chance to provide a more explicit error.
Fixes: 13e1df0928 ("kheaders: explicitly validate existence of cpio command")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Build environments might be running with different umask settings
resulting in indeterministic file modes for the files contained in
kheaders.tar.xz. The file itself is served with 444, i.e. world
readable. Archive the files explicitly with 744,a+X to improve
reproducibility across build environments.
--mode=0444 is not suitable as directories need to be executable. Also,
444 makes it hard to delete all the readonly files after extraction.
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull probes fixes from Masami Hiramatsu:
- uprobes: prevent mutex_lock() under rcu_read_lock().
Recent changes moved uprobe_cpu_buffer preparation which involves
mutex_lock(), under __uprobe_trace_func() which is called inside
rcu_read_lock().
Fix it by moving uprobe_cpu_buffer preparation outside of
__uprobe_trace_func()
- kprobe-events: handle the error case of btf_find_struct_member()
* tag 'probes-fixes-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: fix error check in parse_btf_field()
uprobes: prevent mutex_lock() under rcu_read_lock()
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-27
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 18 files changed, 583 insertions(+), 55 deletions(-).
The main changes are:
1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread
while the promise was to filter by process, from Andrii Nakryiko.
2) Fix the recent influx of syzkaller reports to sockmap which triggered
a locking rule violation by performing a map_delete, from Jakub Sitnicki.
3) Fixes to netkit driver in particular on skb->pkt_type override upon pass
verdict, from Daniel Borkmann.
4) Fix an integer overflow in resolve_btfids which can wrongly trigger build
failures, from Friedrich Vock.
5) Follow-up fixes for ARC JIT reported by static analyzers,
from Shahab Vahedi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
bpf: Allow delete from sockmap/sockhash only if update is allowed
selftests/bpf: Add netkit test for pkt_type
selftests/bpf: Add netkit tests for mac address
netkit: Fix pkt_type override upon netkit pass verdict
netkit: Fix setting mac address in l2 mode
ARC, bpf: Fix issues reported by the static analyzers
selftests/bpf: extend multi-uprobe tests with USDTs
selftests/bpf: extend multi-uprobe tests with child thread case
libbpf: detect broken PID filtering logic for multi-uprobe
bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
bpf: fix multi-uprobe PID filtering logic
bpf: Fix potential integer overflow in resolve_btfids
MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT
====================
Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull vfs fixes from Christian Brauner:
- Fix io_uring based write-through after converting cifs to use the
netfs library
- Fix aio error handling when doing write-through via netfs library
- Fix performance regression in iomap when used with non-large folio
mappings
- Fix signalfd error code
- Remove obsolete comment in signalfd code
- Fix async request indication in netfs_perform_write() by raising
BDP_ASYNC when IOCB_NOWAIT is set
- Yield swap device immediately to prevent spurious EBUSY errors
- Don't cross a .backup mountpoint from backup volumes in afs to avoid
infinite loops
- Fix a race between umount and async request completion in 9p after 9p
was converted to use the netfs library
* tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs, 9p: Fix race between umount and async request completion
afs: Don't cross .backup mountpoint from backup volume
swap: yield device immediately
netfs: Fix setting of BDP_ASYNC from iocb flags
signalfd: drop an obsolete comment
signalfd: fix error return code
iomap: fault in smaller chunks for non-large folio mappings
filemap: add helper mapping_max_folio_size()
netfs: Fix AIO error handling when doing write-through
netfs: Fix io_uring based write-through
btf_find_struct_member() might return NULL or an error via the
ERR_PTR() macro. However, its caller in parse_btf_field() only checks
for the NULL condition. Fix this by using IS_ERR() and returning the
error up the stack.
Link: https://lore.kernel.org/all/20240527094351.15687-1-clopez@suse.de/
Fixes: c440adfbe3 ("tracing/probes: Support BTF based data structure field access")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull irq fixes from Ingo Molnar:
- Fix x86 IRQ vector leak caused by a CPU offlining race
- Fix build failure in the riscv-imsic irqchip driver
caused by an API-change semantic conflict
- Fix use-after-free in irq_find_at_or_after()
* tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after()
genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline
irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
Current implementation of PID filtering logic for multi-uprobes in
uprobe_prog_run() is filtering down to exact *thread*, while the intent
for PID filtering it to filter by *process* instead. The check in
uprobe_prog_run() also differs from the analogous one in
uprobe_multi_link_filter() for some reason. The latter is correct,
checking task->mm, not the task itself.
Fix the check in uprobe_prog_run() to perform the same task->mm check.
While doing this, we also update get_pid_task() use to use PIDTYPE_TGID
type of lookup, given the intent is to get a representative task of an
entire process. This doesn't change behavior, but seems more logical. It
would hold task group leader task now, not any random thread task.
Last but not least, given multi-uprobe support is half-broken due to
this PID filtering logic (depending on whether PID filtering is
important or not), we need to make it easy for user space consumers
(including libbpf) to easily detect whether PID filtering logic was
already fixed.
We do it here by adding an early check on passed pid parameter. If it's
negative (and so has no chance of being a valid PID), we return -EINVAL.
Previous behavior would eventually return -ESRCH ("No process found"),
given there can't be any process with negative PID. This subtle change
won't make any practical change in behavior, but will allow applications
to detect PID filtering fixes easily. Libbpf fixes take advantage of
this in the next patch.
Cc: stable@vger.kernel.org
Acked-by: Jiri Olsa <jolsa@kernel.org>
Fixes: b733eeade4 ("bpf: Add pid filter support for uprobe_multi link")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull more mm updates from Andrew Morton:
"Jeff Xu's implementation of the mseal() syscall"
* tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftest mm/mseal read-only elf memory segment
mseal: add documentation
selftest mm/mseal memory sealing
mseal: add mseal syscall
mseal: wire up mseal syscall
