Pull livepatching update from Petr Mladek:
- Use more informative names for the livepatch transition states
* tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Rename KLP_* to KLP_TRANSITION_*
If a misfit task is affined to a subset of the possible CPUs, we need to
verify that one of these CPUs can fit it. Otherwise the load balancer
code will continuously trigger needlessly leading the balance_interval
to increase in return and eventually end up with a situation where real
imbalances take a long time to address because of this impossible
imbalance situation.
This can happen in Android world where it's common for background tasks
to be restricted to little cores.
Similarly if we can't fit the biggest core, triggering misfit is
pointless as it is the best we can ever get on this system.
To be able to detect that; we use asym_cap_list to iterate through
capacities in the system to see if the task is able to run at a higher
capacity level based on its p->cpus_ptr. We do that when the affinity
change, a fair task is forked, or when a task switched to fair policy.
We store the max_allowed_capacity in task_struct to allow for cheap
comparison in the fast path.
Improve check_misfit_status() function by removing redundant checks.
misfit_task_load will be 0 if the task can't move to a bigger CPU. And
nohz_balancer_kick() already checks for cpu_check_capacity() before
calling check_misfit_status().
Test:
=====
Add
trace_printk("balance_interval = %lu\n", interval)
in get_sd_balance_interval().
run
if [ "$MASK" != "0" ]; then
adb shell "taskset -a $MASK cat /dev/zero > /dev/null"
fi
sleep 10
// parse ftrace buffer counting the occurrence of each valaue
Where MASK is either:
* 0: no busy task running
* 1: busy task is pinned to 1 cpu; handled today to not cause
misfit
* f: busy task pinned to little cores, simulates busy background
task, demonstrates the problem to be fixed
Results:
========
Note how occurrence of balance_interval = 128 overshoots for MASK = f.
BEFORE
------
MASK=0
1 balance_interval = 175
120 balance_interval = 128
846 balance_interval = 64
55 balance_interval = 63
215 balance_interval = 32
2 balance_interval = 31
2 balance_interval = 16
4 balance_interval = 8
1870 balance_interval = 4
65 balance_interval = 2
MASK=1
27 balance_interval = 175
37 balance_interval = 127
840 balance_interval = 64
167 balance_interval = 63
449 balance_interval = 32
84 balance_interval = 31
304 balance_interval = 16
1156 balance_interval = 8
2781 balance_interval = 4
428 balance_interval = 2
MASK=f
1 balance_interval = 175
1328 balance_interval = 128
44 balance_interval = 64
101 balance_interval = 63
25 balance_interval = 32
5 balance_interval = 31
23 balance_interval = 16
23 balance_interval = 8
4306 balance_interval = 4
177 balance_interval = 2
AFTER
-----
Note how the high values almost disappear for all MASK values. The
system has background tasks that could trigger the problem without
simulate it even with MASK=0.
MASK=0
103 balance_interval = 63
19 balance_interval = 31
194 balance_interval = 8
4827 balance_interval = 4
179 balance_interval = 2
MASK=1
131 balance_interval = 63
1 balance_interval = 31
87 balance_interval = 8
3600 balance_interval = 4
7 balance_interval = 2
MASK=f
8 balance_interval = 127
182 balance_interval = 63
3 balance_interval = 31
9 balance_interval = 16
415 balance_interval = 8
3415 balance_interval = 4
21 balance_interval = 2
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240324004552.999936-3-qyousef@layalina.io
Holding a mutex across synchronize_rcu_tasks() and acquiring
that same mutex in code called from do_exit() after its call to
exit_tasks_rcu_start() but before its call to exit_tasks_rcu_stop()
results in deadlock. This is by design, because tasks that are far
enough into do_exit() are no longer present on the tasks list, making
it a bit difficult for RCU Tasks to find them, let alone wait on them
to do a voluntary context switch. However, such deadlocks are becoming
more frequent. In addition, lockdep currently does not detect such
deadlocks and they can be difficult to reproduce.
In addition, if a task voluntarily context switches during that time
(for example, if it blocks acquiring a mutex), then this task is in an
RCU Tasks quiescent state. And with some adjustments, RCU Tasks could
just as well take advantage of that fact.
This commit therefore initializes the data structures that will be needed
to rely on these quiescent states and to eliminate these deadlocks.
Link: https://lore.kernel.org/all/20240118021842.290665-1-chenzhongjin@huawei.com/
Reported-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ON_STACK.
IA-64 was removed with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_TASK_STRUCT_ON_STACK
as well.
Note: this also reveals a potential bug in powerpc code, which makes use of
__init_task_data without selecting ARCH_TASK_STRUCT_ON_STACK which makes
__init_task_data a no-op. This is broken since commit d11ed3ab31 ("Expand
INIT_TASK() in init/init_task.c and remove") from 2018 and needs to be
addressed separately.
Link: https://lkml.kernel.org/r/20231116133638.1636277-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
There has been a long standing page cache coherence bug with direct IO.
This provides part of a mechanism to fix it, currently just used by
bcachefs but potentially worth promoting to the VFS.
Direct IO evicts the range of the pagecache being read or written to.
For reads, we need dirty pages to be written to disk, so that the read
doesn't return stale data. For writes, we need to evict that range of
the pagecache so that it's not stale after the write completes.
However, without a locking mechanism to prevent those pages from being
re-added to the pagecache - by a buffered read or page fault - page
cache inconsistency is still possible.
This isn't necessarily just an issue for userspace when they're playing
games; filesystems may hang arbitrary state off the pagecache, and so
page cache inconsistency may cause real filesystem bugs, depending on
the filesystem. This is less of an issue for iomap based filesystems,
but e.g. buffer heads caches disk block mappings (!) and attaches them
to the pagecache, and bcachefs attaches disk reservations to pagecache
pages.
This issue has been hard to fix, because
- we need to add a lock (henceforth called pagecache_add_lock), which
would be held for the duration of the direct IO
- page faults add pages to the page cache, thus need to take the same
lock
- dio -> gup -> page fault thus can deadlock
And we cannot enforce a lock ordering with this lock, since userspace
will be controlling the lock ordering (via the fd and buffer arguments
to direct IOs), so we need a different method of deadlock avoidance.
We need to tell the page fault handler that we're already holding a
pagecache_add_lock, and since plumbing it through the entire gup() path
would be highly impractical this adds a field to task_struct.
Then the full method is:
- in the dio path, when we first take the pagecache_add_lock, note the
mapping in the current task_struct
- in the page fault handler, if faults_disabled_mapping is set, we
check if it's the same mapping as the one we're taking a page fault
for, and if so return an error.
Then we check lock ordering: if there's a lock ordering violation and
trylock fails, we'll have to cycle the locks and return an error that
tells the DIO path to retry: faults_disabled_mapping is also used for
signalling "locks were dropped, please retry".
Also relevant to this patch: mapping->invalidate_lock.
mapping->invalidate_lock provides most of the required semantics - it's
used by truncate/fallocate to block pages being added to the pagecache.
However, since it's a rwsem, direct IOs would need to take the write
side in order to block page cache adds, and would then be exclusive with
each other - we'll need a new type of lock to pair with this approach.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Jan Kara <jack@suse.cz>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Andreas Grünbacher <andreas.gruenbacher@gmail.com>
They are implicitly zero-initialized, remove explicit initialization.
It keeps the upcoming additions to kcsan_ctx consistent with the rest.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On some archs, the idle task can call into cpu_suspend(). The cpu_suspend()
will disable or pause function graph tracing, as there's some paths in
bringing down the CPU that can have issues with its return address being
modified. The task_struct structure has a "tracing_graph_pause" atomic
counter, that when set to something other than zero, the function graph
tracer will not modify the return address.
The problem is that the tracing_graph_pause counter is initialized when the
function graph tracer is enabled. This can corrupt the counter for the idle
task if it is suspended in these architectures.
CPU 1 CPU 2
----- -----
do_idle()
cpu_suspend()
pause_graph_tracing()
task_struct->tracing_graph_pause++ (0 -> 1)
start_graph_tracing()
for_each_online_cpu(cpu) {
ftrace_graph_init_idle_task(cpu)
task-struct->tracing_graph_pause = 0 (1 -> 0)
unpause_graph_tracing()
task_struct->tracing_graph_pause-- (0 -> -1)
The above should have gone from 1 to zero, and enabled function graph
tracing again. But instead, it is set to -1, which keeps it disabled.
There's no reason that the field tracing_graph_pause on the task_struct can
not be initialized at boot up.
Cc: stable@vger.kernel.org
Fixes: 380c4b1411 ("tracing/function-graph-tracer: append the tracing_graph_flag")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339
Reported-by: pierre.gondois@arm.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Grab actual references to the files_struct. To avoid circular references
issues due to this, we add a per-task note that keeps track of what
io_uring contexts a task has used. When the tasks execs or exits its
assigned files, we cancel requests based on this tracking.
With that, we can grab proper references to the files table, and no
longer need to rely on stashing away ring_fd and ring_file to check
if the ring_fd may have been closed.
Cc: stable@vger.kernel.org # v5.5+
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull OpenRISC updates from Stafford Horne:
"A few patches all over the place during this cycle, mostly bug and
sparse warning fixes for OpenRISC, but a few enhancements too. Note,
there are 2 non OpenRISC specific fixups.
Non OpenRISC fixes:
- In init we need to align the init_task correctly to fix an issue
with MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I
kept it on my tree.
- In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd.
Arnd asked to merge it via my tree.
OpenRISC fixes:
- Many fixes for OpenRISC sprase warnings.
- Add support OpenRISC SMP tlb flushing rather than always flushing
the entire TLB on every CPU.
- Fix bug when dumping stack via /proc/xxx/stack of user threads"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: uaccess: Add user address space check to access_ok
openrisc: signal: Fix sparse address space warnings
openrisc: uaccess: Remove unused macro __addr_ok
openrisc: uaccess: Use static inline function in access_ok
openrisc: uaccess: Fix sparse address space warnings
openrisc: io: Fixup defines and move include to the end
asm-generic/io.h: Fix sparse warnings on big-endian architectures
openrisc: Implement proper SMP tlb flushing
openrisc: Fix oops caused when dumping stack
openrisc: Add support for external initrd images
init: Align init_task to avoid conflict with MUTEX_FLAGS
openrisc: fix __user in raw_copy_to_user()'s prototype
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
When booting on 32-bit machines (seen on OpenRISC) I saw this warning
with CONFIG_DEBUG_MUTEXES turned on.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/locking/mutex.c:1242 __mutex_unlock_slowpath+0x328/0x3ec
DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc1-simple-smp-00005-g2864e2171db4-dirty #179
Call trace:
[<(ptrval)>] dump_stack+0x34/0x48
[<(ptrval)>] __warn+0x104/0x158
[<(ptrval)>] ? __mutex_unlock_slowpath+0x328/0x3ec
[<(ptrval)>] warn_slowpath_fmt+0x7c/0x94
[<(ptrval)>] __mutex_unlock_slowpath+0x328/0x3ec
[<(ptrval)>] mutex_unlock+0x18/0x28
[<(ptrval)>] __cpuhp_setup_state_cpuslocked.part.0+0x29c/0x2f4
[<(ptrval)>] ? page_alloc_cpu_dead+0x0/0x30
[<(ptrval)>] ? start_kernel+0x0/0x684
[<(ptrval)>] __cpuhp_setup_state+0x4c/0x5c
[<(ptrval)>] page_alloc_init+0x34/0x68
[<(ptrval)>] ? start_kernel+0x1a0/0x684
[<(ptrval)>] ? early_init_dt_scan_nodes+0x60/0x70
irq event stamp: 0
I traced this to kernel/locking/mutex.c storing 3 bits of MUTEX_FLAGS in
the task_struct pointer (mutex.owner). There is a comment saying that
task_structs are always aligned to L1_CACHE_BYTES. This is not true for
the init_task.
On 64-bit machines this is not a problem because symbol addresses are
naturally aligned to 64-bits providing 3 bits for MUTEX_FLAGS. Howerver,
for 32-bit machines the symbol address only has 2 bits available.
Fix this by setting init_task alignment to at least L1_CACHE_BYTES.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-14-a.darwish@linutronix.de
A common question asked when debugging seccomp filters is "how many
filters are attached to your process?" Provide a way to easily answer
this question through /proc/$pid/status with a "Seccomp_filters" line.
Signed-off-by: Kees Cook <keescook@chromium.org>
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
