dasharo/linux
0
0
Fork 0
mirror of https://github.com/Dasharo/linux.git synced 2026-03-06 15:25:10 -08:00
Code Issues Packages Projects Releases Wiki Activity
886,869 Commits 2 Branches 0 Tags
2e17ed94de68953b17ed91b64f4bd176cdf38ad4
Commit Graph

916 Commits

Author SHA1 Message Date
Linus Torvalds
ec939e4c94 Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 
Pull ARM SoC driver updates from Olof Johansson:
 "Various driver updates for platforms:

   - A larger set of work on Tegra 2/3 around memory controller and
     regulator features, some fuse cleanups, etc..

   - MMP platform drivers, in particular for USB PHY, and other smaller
     additions.

   - Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
     and ASV (adaptive voltage), allowing the platform to run at more
     optimal operating points.

   - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas

   - Clock/reset control driver for TI/OMAP

   - Meson-A1 reset controller support

   - Qualcomm sdm845 and sda845 SoC IDs for socinfo"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
  firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
  soc: fsl: add RCPM driver
  dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
  memory: tegra: Consolidate registers definition into common header
  memory: tegra: Ensure timing control debug features are disabled
  memory: tegra: Introduce Tegra30 EMC driver
  memory: tegra: Do not handle error from wait_for_completion_timeout()
  memory: tegra: Increase handshake timeout on Tegra20
  memory: tegra: Print a brief info message about EMC timings
  memory: tegra: Pre-configure debug register on Tegra20
  memory: tegra: Include io.h instead of iopoll.h
  memory: tegra: Adapt for Tegra20 clock driver changes
  memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
  memory: tegra: Add gr2d and gr3d to DRM IOMMU group
  memory: tegra: Set DMA mask based on supported address bits
  soc: at91: Add Atmel SFR SN (Serial Number) support
  memory: atmel-ebi: switch to SPDX license identifiers
  memory: atmel-ebi: move NUM_CS definition inside EBI driver
  soc: mediatek: Refactor bus protection control
  soc: mediatek: Refactor sram control
  ...
 2019-12-05 11:43:31 -08:00
Linus Torvalds
c3bed3b20e Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 
Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Warn if a host bridge has no NUMA info (Yunsheng Lin)

   - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
     Efremov)

  Resource management:

   - Fix boot-time Embedded Controller GPE storm caused by incorrect
     resource assignment after ACPI Bus Check Notification (Mika
     Westerberg)

   - Protect pci_reassign_bridge_resources() against concurrent
     addition/removal (Benjamin Herrenschmidt)

   - Fix bridge dma_ranges resource list cleanup (Rob Herring)

   - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
     the MMIO and prefetchable MMIO window sizes of hotplug bridges
     independently (Nicholas Johnson)

   - Fix MMIO/MMIO_PREF window assignment that assigned more space than
     desired (Nicholas Johnson)

   - Only enforce bus numbers from bridge EA if the bridge has EA
     devices downstream (Subbaraya Sundeep)

   - Consolidate DT "dma-ranges" parsing and convert all host drivers to
     use shared parsing (Rob Herring)

  Error reporting:

   - Restore AER capability after resume (Mayurkumar Patel)

   - Add PoisonTLPBlocked AER counter (Rajat Jain)

   - Use for_each_set_bit() to simplify AER code (Andy Shevchenko)

   - Fix AER kernel-doc (Andy Shevchenko)

   - Add "pcie_ports=dpc-native" parameter to allow native use of DPC
     even if platform didn't grant control over AER (Olof Johansson)

  Hotplug:

   - Avoid returning prematurely from sysfs requests to enable or
     disable a PCIe hotplug slot (Lukas Wunner)

   - Don't disable interrupts twice when suspending hotplug ports (Mika
     Westerberg)

   - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
     Westerberg)

  Power management:

   - Remove unnecessary ASPM locking (Bjorn Helgaas)

   - Add support for disabling L1 PM Substates (Heiner Kallweit)

   - Allow re-enabling Clock PM after it has been disabled (Heiner
     Kallweit)

   - Add sysfs attributes for controlling ASPM link states (Heiner
     Kallweit)

   - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
     sysfs files (Heiner Kallweit)

   - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
     USB 2.0 or 1.1 connect events (Kai-Heng Feng)

   - Move power state check out of pci_msi_supported() (Bjorn Helgaas)

   - Fix incorrect MSI-X masking on resume and revert related nvme quirk
     for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)

   - Always return devices to D0 when thawing to fix hibernation with
     drivers like mlx4 that used legacy power management (previously we
     only did it for drivers with new power management ops) (Dexuan Cui)

   - Clear PCIe PME Status even for legacy power management (Bjorn
     Helgaas)

   - Fix PCI PM documentation errors (Bjorn Helgaas)

   - Use dev_printk() for more power management messages (Bjorn Helgaas)

   - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)

   - Convert xen-platform from legacy to generic power management (Bjorn
     Helgaas)

   - Removed unused .resume_early() and .suspend_late() legacy power
     management hooks (Bjorn Helgaas)

   - Rearrange power management code for clarity (Rafael J. Wysocki)

   - Decode power states more clearly ("4" or "D4" really refers to
     "D3cold") (Bjorn Helgaas)

   - Notice when reading PM Control register returns an error (~0)
     instead of interpreting it as being in D3hot (Bjorn Helgaas)

   - Add missing link delays required by the PCIe spec (Mika Westerberg)

  Virtualization:

   - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
     Helgaas)

   - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
     previously didn't recognize that) (Kuppuswamy Sathyanarayanan)

   - Allow VFs to use PASID (the PF PASID capability is shared by the
     VFs, but the code previously didn't recognize that) (Kuppuswamy
     Sathyanarayanan)

   - Disconnect PF and VF ATS enablement, since ATS in PFs and
     associated VFs can be enabled independently (Kuppuswamy
     Sathyanarayanan)

   - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)

   - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)

   - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
     Wilczynski)

   - Remove unused PRI and PASID stubs (Bjorn Helgaas)

   - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
     interfaces that are only used by built-in IOMMU drivers (Bjorn
     Helgaas)

   - Hide PRI and PASID state restoration functions used only inside the
     PCI core (Bjorn Helgaas)

   - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)

   - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)

   - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
     Cherian)

   - Fix the UPDCR register address in the Intel ACS quirk (Steffen
     Liebergeld)

   - Unify ACS quirk implementations (Bjorn Helgaas)

  Amlogic Meson host bridge driver:

   - Fix meson PERST# GPIO polarity problem (Remi Pommarel)

   - Add DT bindings for Amlogic Meson G12A (Neil Armstrong)

   - Fix meson clock names to match DT bindings (Neil Armstrong)

   - Add meson support for Amlogic G12A SoC with separate shared PHY
     (Neil Armstrong)

   - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
     combo PHY (Neil Armstrong)

   - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)

   - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
     (Neil Armstrong)

  Broadcom iProc host bridge driver:

   - Invalidate iProc PAXB address mapping before programming it
     (Abhishek Shah)

   - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)

  Cadence host bridge driver:

   - Refactor Cadence PCIe host controller to use as a library for both
     host and endpoint (Tom Joseph)

  Freescale Layerscape host bridge driver:

   - Add layerscape LS1028a support (Xiaowei Bao)

  Intel VMD host bridge driver:

   - Add VMD bus 224-255 restriction decode (Jon Derrick)

   - Add VMD 8086:9A0B device ID (Jon Derrick)

   - Remove Keith from VMD maintainer list (Keith Busch)

  Marvell ARMADA 3700 / Aardvark host bridge driver:

   - Use LTSSM state to build link training flag since Aardvark doesn't
     implement the Link Training bit (Remi Pommarel)

   - Delay before training Aardvark link in case PERST# was asserted
     before the driver probe (Remi Pommarel)

   - Fix Aardvark issues with Root Control reads and writes (Remi
     Pommarel)

   - Don't rely on jiffies in Aardvark config access path since
     interrupts may be disabled (Remi Pommarel)

   - Fix Aardvark big-endian support (Grzegorz Jaszczyk)

  Marvell ARMADA 370 / XP host bridge driver:

   - Make mvebu_pci_bridge_emul_ops static (Ben Dooks)

  Microsoft Hyper-V host bridge driver:

   - Add hibernation support for Hyper-V virtual PCI devices (Dexuan
     Cui)

   - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
     Cui)

   - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)

  Mobiveil host bridge driver:

   - Change mobiveil csr_read()/write() function names that conflict
     with riscv arch functions (Kefeng Wang)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra CLKREQ dependency programming (Vidya Sagar)

  Renesas R-Car host bridge driver:

   - Remove unnecessary header include from rcar (Andrew Murray)

   - Tighten register index checking for rcar inbound range programming
     (Marek Vasut)

   - Fix rcar inbound range alignment calculation to improve packing of
     multiple entries (Marek Vasut)

   - Update rcar MACCTLR setting to match documentation (Yoshihiro
     Shimoda)

   - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
     (Yoshihiro Shimoda)

   - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
     Horman)

  Rockchip host bridge driver:

   - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
     Murphy)

  Socionext UniPhier host bridge driver:

   - Set uniphier to host (RC) mode always (Kunihiko Hayashi)

  Endpoint drivers:

   - Fix endpoint driver sign extension problem when shifting page
     number to phys_addr_t (Alan Mikhak)

  Misc:

   - Add NumaChip SPDX header (Krzysztof Wilczynski)

   - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)

   - Remove unused includes (Krzysztof Wilczynski)

   - Removed unused sysfs attribute groups (Ben Dooks)

   - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)

   - Add PCIe Link Control 2 register field definitions to replace magic
     numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)

   - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
     Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)

   - Use pcie_capability_read_word() instead of pci_read_config_word()
     in AMDGPU and Radeon CIK/SI (Frederick Lawler)

   - Remove unused pci_irq_get_node() Greg Kroah-Hartman)

   - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
     (Palmer Dabbelt, Michal Simek)

   - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)

   - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
     Helgaas)

   - Fix bridge emulation big-endian support (Grzegorz Jaszczyk)

   - Fix dwc find_next_bit() usage (Niklas Cassel)

   - Fix pcitest.c fd leak (Hewenliang)

   - Fix typos and comments (Bjorn Helgaas)

   - Fix Kconfig whitespace errors (Krzysztof Kozlowski)"

* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
  PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
  asm-generic: Make msi.h a mandatory include/asm header
  Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
  PCI/MSI: Fix incorrect MSI-X masking on resume
  PCI/MSI: Move power state check out of pci_msi_supported()
  PCI/MSI: Remove unused pci_irq_get_node()
  PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
  PCI: hv: Change pci_protocol_version to per-hbus
  PCI: hv: Add hibernation support
  PCI: hv: Reorganize the code in preparation of hibernation
  MAINTAINERS: Remove Keith from VMD maintainer
  PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
  PCI/ASPM: Add sysfs attributes for controlling ASPM link states
  PCI: Fix indentation
  drm/radeon: Prefer pcie_capability_read_word()
  drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
  drm/radeon: Correct Transmit Margin masks
  drm/amdgpu: Prefer pcie_capability_read_word()
  PCI: uniphier: Set mode register to host mode
  drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
  ...
 2019-12-03 13:58:22 -08:00
Linus Torvalds
8f56e4ebe0 Merge tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 
Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other driver patches for 5.5-rc1

  Loads of different things in here, this feels like the catch-all of
  driver subsystems these days. Full details are in the shortlog, but
  nothing major overall, just lots of driver updates and additions.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (198 commits)
  char: Fix Kconfig indentation, continued
  habanalabs: add more protection of device during reset
  habanalabs: flush EQ workers in hard reset
  habanalabs: make the reset code more consistent
  habanalabs: expose reset counters via existing INFO IOCTL
  habanalabs: make code more concise
  habanalabs: use defines for F/W files
  habanalabs: remove prints on successful device initialization
  habanalabs: remove unnecessary checks
  habanalabs: invalidate MMU cache only once
  habanalabs: skip VA block list update in reset flow
  habanalabs: optimize MMU unmap
  habanalabs: prevent read/write from/to the device during hard reset
  habanalabs: split MMU properties to PCI/DRAM
  habanalabs: re-factor MMU masks and documentation
  habanalabs: type specific MMU cache invalidation
  habanalabs: re-factor memory module code
  habanalabs: export uapi defines to user-space
  habanalabs: don't print error when queues are full
  habanalabs: increase max jobs number to 512
  ...
 2019-11-27 10:53:50 -08:00
Linus Torvalds
59274c7164 Merge tag 'usb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 
Pull USB updates from Greg KH:
 "Here is the big set of USB patches for 5.5-rc1

  Lots of little things in here:
   - typec updates and additions
   - usb-serial drivers cleanups and fixes
   - misc USB drivers cleanups and fixes
   - gadget drivers new features and controllers added
   - usual xhci additions
   - other minor changes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
  usb: gadget: udc: gr_udc: create debugfs directory under usb root
  usb: gadget: atmel: create debugfs directory under usb root
  usb: musb: create debugfs directory under usb root
  usb: serial: Fix Kconfig indentation
  usb: misc: Fix Kconfig indentation
  usb: gadget: Fix Kconfig indentation
  usb: host: Fix Kconfig indentation
  usb: dwc3: Fix Kconfig indentation
  usb: gadget: configfs: Fix missing spin_lock_init()
  usb-storage: Disable UAS on JMicron SATA enclosure
  USB: documentation: flags on usb-storage versus UAS
  USB: uas: heed CAPACITY_HEURISTICS
  USB: uas: honor flag to avoid CAPACITY16
  usb: host: xhci-tegra: Correct phy enable sequence
  usb-serial: cp201x: support Mark-10 digital force gauge
  usb: chipidea: imx: pinctrl for HSIC is optional
  usb: chipidea: imx: refine the error handling for hsic
  usb: chipidea: imx: change hsic power regulator as optional
  usb: chipidea: imx: check data->usbmisc_data against NULL before access
  usb: chipidea: core: change vbus-regulator as optional
  ...
 2019-11-27 10:46:34 -08:00
Grygorii Strashko
da84e50c8e phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver 
Add dependency from TI_CPSW_SWITCHDEV.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2019-11-20 11:25:24 -08:00
Heiko Stuebner
4569e64ab6 phy: phy-rockchip-inno-usb2: add phy description for px30 
The px30 soc from Rockchip shares the same register description as
the rk3328, so can re-use its definitions.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-31 18:27:47 +05:30
Stephan Gerhold
64f86b9978 phy: qcom-usb-hs: Fix extcon double register after power cycle 
Commit f0b5c2c963 ("phy: qcom-usb-hs: Replace the extcon API")
switched from extcon_register_notifier() to the resource-managed
API, i.e. devm_extcon_register_notifier().

This is problematic in this case, because the extcon notifier
is dynamically registered/unregistered whenever the PHY is powered
on/off. The resource-managed API does not unregister the notifier
until the driver is removed, so as soon as the PHY is power cycled,
attempting to register the notifier again results in:

	double register detected
	WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0
	Call trace:
	 ...
	 extcon_register_notifier+0x74/0xb8
	 devm_extcon_register_notifier+0x54/0xb8
	 qcom_usb_hs_phy_power_on+0x1fc/0x208
	 ...

... and USB stops working after plugging the cable out and in
another time.

The easiest way to fix this is to make a partial revert of
commit f0b5c2c963 ("phy: qcom-usb-hs: Replace the extcon API")
and avoid using the resource-managed API in this case.

Fixes: f0b5c2c963 ("phy: qcom-usb-hs: Replace the extcon API")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-31 16:54:01 +05:30
Biju Das
c9baab38fe phy: renesas: phy-rcar-gen2: Fix the array off by one warning 
Fix the below smatch warning by adding variable check rather than the
hardcoded value.
warn: array off by one? 'data->select_value[channel_num]'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-31 16:54:01 +05:30
Wei Yongjun
82b5d16441 phy: lantiq: vrx200-pcie: fix error return code in ltq_vrx200_pcie_phy_power_on() 
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: e52a632195 ("phy: lantiq: vrx200-pcie: add a driver for the Lantiq VRX200 PCIe PHY")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-31 16:54:01 +05:30
Wyon Bi
b7535a3bc0 phy/rockchip: Add support for Innosilicon MIPI/LVDS/TTL PHY 
The Innosilicon Video Combo PHY not only supports MIPI DSI,
but also LVDS and TTL functions with small die size and low
pin count. Customers can choose according to their own applications.

Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
[removed TTL mode for now, as it required a hook back into the dsi host]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-31 16:54:00 +05:30
Icenowy Zheng
a228890f94 phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC 
Allwinner H6 SoC contains a USB3 PHY (with USB2 DP/DM lines also
controlled).

Add a driver for it.

The register operations in this driver is mainly extracted from the BSP
USB3 driver.

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-31 16:54:00 +05:30
Vinod Koul
a88c85ee2e phy: qcom-qmp: Add SM8150 QMP UFS PHY support 
SM8150 UFS PHY is v4 of QMP phy. Add support for V4 QMP phy register
defines and support for SM8150 QMP UFS PHY.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-25 17:58:19 +05:30
Grygorii Strashko
316b429459 phy: ti: gmii-sel: fix mac tx internal delay for rgmii-rxid 
Now phy-gmii-sel will disable MAC TX internal delay for PHY interface mode
"rgmii-rxid" which is incorrect.
Hence, fix it by enabling MAC TX internal delay in the case of "rgmii-rxid"
mode.

Fixes: 92b58b3474 ("phy: ti: introduce phy-gmii-sel driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-25 17:58:15 +05:30
Bartosz Golaszewski
64d5989c1a phy: tegra: use regulator_bulk_set_supply_names() 
Use the new regulator helper instead of a for loop.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-25 17:58:13 +05:30
YueHaibing
54fad40d3f phy: ti: dm816x: remove set but not used variable 'phy_data' 
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/phy/ti/phy-dm816x-usb.c:192:29: warning:
 variable phy_data set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-25 17:58:13 +05:30
Yoshihiro Shimoda
4bd5ead82d phy: renesas: rcar-gen3-usb2: Fix sysfs interface of "role" 
Since the role_store() uses strncmp(), it's possible to refer
out-of-memory if the sysfs data size is smaller than strlen("host").
This patch fixes it by using sysfs_streq() instead of strncmp().

Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 9bb86777fb ("phy: rcar-gen3-usb2: add sysfs for usb role swap")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:37 +05:30
Nagarjuna Kristam
a8a24429dd phy: tegra: xusb: Add vbus override support on Tegra186 
Tegra XUSB device control driver needs to control vbus override
during its operations, add API for the support.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:36 +05:30
Nagarjuna Kristam
90767cdfea phy: tegra: xusb: Add vbus override support on Tegra210 
Tegra XUSB device control driver needs to control vbus override
during its operations, add API for the support.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:36 +05:30
Nagarjuna Kristam
a5be28c365 phy: tegra: xusb: Add usb3 port fake support on Tegra210 
On Tegra210, usb2 only otg/peripheral ports dont work in device mode.
They need an assosciated usb3 port to work in device mode. Identify
an unused usb3 port and assign it as a fake USB3 port to USB2 only
port whose mode is otg/peripheral.

Based on work by BH Hsieh <bhsieh@nvidia.com>.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:34 +05:30
Nagarjuna Kristam
ac25b6e9f8 phy: tegra: xusb: Add XUSB dual mode support on Tegra210 
Configure the port capabilities based on usb_dr_mode settings.

Based on work by JC Kuo <jckuo@nvidia.com>.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:33 +05:30
Ben Dooks
1025cb924b phy: phy-brcm-usb-init: fix use of integer as pointer 
The xhci_ec_base variable is a pointer, so don't compare
it with an integer.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:31 +05:30
Ben Dooks
e4b957d3a7 phy: phy-brcm-usb-init: fix __iomem annotations 
The register address should have __iomem attributes
so fix this to remove the following sparse warnings:

drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:459:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:461:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:465:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:469:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:478:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:480:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:485:30:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:494:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:495:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:498:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:501:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:613:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:640:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:710:64: warning: Using plain integer as NULL pointer
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:712:32:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:713:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:717:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:720:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:721:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:794:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:813:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:829:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:843:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:847:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9:    expected void [noderef] <asn:2> *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:878:9:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:880:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:896:29:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:901:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: cast removes address space '<asn:2>' of expression
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:905:37:    got void *
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:423:52:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13: warning: incorrect type in assignment (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    expected void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:434:13:    got void [noderef] <asn:2> *
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38: warning: incorrect type in argument 1 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:38:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51: warning: incorrect type in argument 2 (different address spaces)
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    expected void [noderef] <asn:2> *addr
drivers/phy/broadcom/phy-brcm-usb-init.c:435:51:    got void *reg
drivers/phy/broadcom/phy-brcm-usb-init.c:422:13: warning: too many warnings

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:31 +05:30
YueHaibing
fa09344014 phy: hisilicon: use devm_platform_ioremap_resource() to simplify code 
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:28 +05:30
Geert Uytterhoeven
c9dfadeee8 phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq 
As platform_get_irq() now prints an error when the interrupt does not
exist, a scary warning may be printed for an optional interrupt:

    phy_rcar_gen3_usb2 ee0a0200.usb-phy: IRQ index 0 not found

Fix this by calling platform_get_irq_optional() instead.

Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:27 +05:30
Markus Elfring
265938bb1b phy-mvebu-a3700-utmi: Use devm_platform_ioremap_resource() in mvebu_a3700_utmi_phy_probe() 
Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 2019-10-23 13:20:27 +05:30