IPv4 and IPv6 packets may arrive with lower-layer padding that is not
included in the L3 length. For example, a short IPv4 packet may have
up to 6 bytes of padding following the IP payload when received on an
Ethernet device with a minimum packet length of 64 bytes.
Higher-layer processing functions in netfilter (e.g. nf_ip_checksum(),
and help() in nf_conntrack_ftp) assume skb->len reflects the length of
the L3 header and payload, rather than referring back to
ip_hdr->tot_len or ipv6_hdr->payload_len, and get confused by
lower-layer padding.
In the normal IPv4 receive path, ip_rcv() trims the packet to
ip_hdr->tot_len before invoking netfilter hooks. In the IPv6 receive
path, ip6_rcv() does the same using ipv6_hdr->payload_len. Similarly
in the br_netfilter receive path, br_validate_ipv4() and
br_validate_ipv6() trim the packet to the L3 length before invoking
netfilter hooks.
Currently in the OVS conntrack receive path, ovs_ct_execute() pulls
the skb to the L3 header but does not trim it to the L3 length before
calling nf_conntrack_in(NF_INET_PRE_ROUTING). When
nf_conntrack_proto_tcp encounters a packet with lower-layer padding,
nf_ip_checksum() fails causing a "nf_ct_tcp: bad TCP checksum" log
message. While extra zero bytes don't affect the checksum, the length
in the IP pseudoheader does. That length is based on skb->len, and
without trimming, it doesn't match the length the sender used when
computing the checksum.
In ovs_ct_execute(), trim the skb to the L3 length before higher-layer
processing.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add suffix LL to constant 1000 in order to give the compiler
complete information about the proper arithmetic to use. Notice
that this constant is used in a context that expects an expression
of type long long int (64 bits, signed).
The expression (band->burst_size + band->rate) * 1000 is currently
being evaluated using 32-bit arithmetic.
Addresses-Coverity-ID: 1461563 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch adds support for openvswitch to configure erspan
v1 and v2. The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr is added
to uapi as a binary blob to support all ERSPAN v1 and v2's
fields. Note that Previous commit "openvswitch: Add erspan tunnel
support." was reverted since it does not design properly.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial fix removes unneeded semicolons after if blocks.
This issue was detected by using the Coccinelle software.
Signed-off-by: Christopher Díaz Riveros <chrisadr@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit ceaa001a17.
The OVS_TUNNEL_KEY_ATTR_ERSPAN_OPTS attr should be designed
as a nested attribute to support all ERSPAN v1 and v2's fields.
The current attr is a be32 supporting only one field. Thus, this
patch reverts it and later patch will redo it using nested attr.
Signed-off-by: William Tu <u9012063@gmail.com>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: Pravin Shelar <pshelar@ovn.org>
Acked-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preempt counter APIs have been split out, currently, hardirq.h just
includes irq_enter/exit APIs which are not used by openvswitch at all.
So, remove the unused hardirq.h.
Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: dev@openvswitch.org
Signed-off-by: David S. Miller <davem@davemloft.net>
OVS_NLERR prints a newline at the end of the message string, so the
message string does not need to include a newline explicitly. Done
using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lots of overlapping changes. Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.
Include a necessary change by Jakub Kicinski, with log message:
====================
cls_bpf no longer takes care of offload tracking. Make sure
netdevsim performs necessary checks. This fixes a warning
caused by TC trying to remove a filter it has not added.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_vlan_pop() expects skb->protocol to be a valid TPID for double
tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop()
shift the true ethertype into position for us.
Fixes: 5108bbaddc ("openvswitch: add processing of L3 packets")
Signed-off-by: Eric Garver <e@erig.me>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch refactors the existing erspan implementation in order
to support erspan version 2, which has additional metadata. So, in
stead of having one 'struct erspanhdr' holding erspan version 1,
breaks it into 'struct erspan_base_hdr' and 'struct erspan_metadata'.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 3a927bc7cf ("ovs: propagate per dp max headroom to
all vports") the need_headroom for the internal vport is updated
accordingly to the max needed headroom in its datapath.
That avoids the pskb_expand_head() costs when sending/forwarding
packets towards tunnel devices, at least for some scenarios.
We still require such copy when using the ovs-preferred configuration
for vxlan tunnels:
br_int
/ \
tap vxlan
(remote_ip:X)
br_phy
\
NIC
where the route towards the IP 'X' is via 'br_phy'.
When forwarding traffic from the tap towards the vxlan device, we
will call pskb_expand_head() in vxlan_build_skb() because
br-phy->needed_headroom is equal to tun->needed_headroom.
With this change we avoid updating the internal vport needed_headroom,
so that in the above scenario no head copy is needed, giving 5%
performance improvement in UDP throughput test.
As a trade-off, packets sent from the internal port towards a tunnel
device will now experience the head copy overhead. The rationale is
that the latter use-case is less relevant performance-wise.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
timespec is deprecated because of the y2038 overflow, so let's convert
this one to ktime_get_ts64(). The code is already safe even on 32-bit
architectures, since it uses monotonic times. On 64-bit architectures,
nothing changes, while on 32-bit architectures this avoids one
type conversion.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we want to add a datapath flow, which has more than 500 vxlan outputs'
action, we will get the following error reports:
openvswitch: netlink: Flow action size 32832 bytes exceeds max
openvswitch: netlink: Flow action size 32832 bytes exceeds max
openvswitch: netlink: Actions may not be safe on all matching packets
... ...
It seems that we can simply enlarge the MAX_ACTIONS_BUFSIZE to fix it, but
this is not the root cause. For example, for a vxlan output action, we need
about 60 bytes for the nlattr, but after it is converted to the flow
action, it only occupies 24 bytes. This means that we can still support
more than 1000 vxlan output actions for a single datapath flow under the
the current 32k max limitation.
So even if the nla_len(attr) is larger than MAX_ACTIONS_BUFSIZE, we
shouldn't report EINVAL and keep it move on, as the judgement can be
done by the reserve_sfa_size.
Signed-off-by: zhangliping <zhangliping02@baidu.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
gso_type is being used in binary AND operations together with SKB_GSO_UDP.
The issue is that variable gso_type is of type unsigned short and
SKB_GSO_UDP expands to more than 16 bits:
SKB_GSO_UDP = 1 << 16
this makes any binary AND operation between gso_type and SKB_GSO_UDP to
be always zero, hence making some code unreachable and likely causing
undesired behavior.
Fix this by changing the data type of variable gso_type to unsigned int.
Addresses-Coverity-ID: 1462223
Fixes: 0c19f846d5 ("net: accept UFO datagrams from tuntap and packet")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tuntap and similar devices can inject GSO packets. Accept type
VIRTIO_NET_HDR_GSO_UDP, even though not generating UFO natively.
Processes are expected to use feature negotiation such as TUNSETOFFLOAD
to detect supported offload types and refrain from injecting other
packets. This process breaks down with live migration: guest kernels
do not renegotiate flags, so destination hosts need to expose all
features that the source host does.
Partially revert the UFO removal from 182e0b6b5846~1..d9d30adf5677.
This patch introduces nearly(*) no new code to simplify verification.
It brings back verbatim tuntap UFO negotiation, VIRTIO_NET_HDR_GSO_UDP
insertion and software UFO segmentation.
It does not reinstate protocol stack support, hardware offload
(NETIF_F_UFO), SKB_GSO_UDP tunneling in SKB_GSO_SOFTWARE or reception
of VIRTIO_NET_HDR_GSO_UDP packets in tuntap.
To support SKB_GSO_UDP reappearing in the stack, also reinstate
logic in act_csum and openvswitch. Achieve equivalence with v4.13 HEAD
by squashing in commit 939912216f ("net: skb_needs_check() removes
CHECKSUM_UNNECESSARY check for tx.") and reverting commit 8d63bee643
("net: avoid skb_warn_bad_offload false positives on UFO").
(*) To avoid having to bring back skb_shinfo(skb)->ip6_frag_id,
ipv6_proxy_select_ident is changed to return a __be32 and this is
assigned directly to the frag_hdr. Also, SKB_GSO_UDP is inserted
at the end of the enum to minimize code churn.
Tested
Booted a v4.13 guest kernel with QEMU. On a host kernel before this
patch `ethtool -k eth0` shows UFO disabled. After the patch, it is
enabled, same as on a v4.13 host kernel.
A UFO packet sent from the guest appears on the tap device:
host:
nc -l -p -u 8000 &
tcpdump -n -i tap0
guest:
dd if=/dev/zero of=payload.txt bs=1 count=2000
nc -u 192.16.1.1 8000 < payload.txt
Direct tap to tap transmission of VIRTIO_NET_HDR_GSO_UDP succeeds,
packets arriving fragmented:
./with_tap_pair.sh ./tap_send_ufo tap0 tap1
(from https://github.com/wdebruij/kerneltools/tree/master/tests)
Changes
v1 -> v2
- simplified set_offload change (review comment)
- documented test procedure
Link: http://lkml.kernel.org/r/<CAF=yD-LuUeDuL9YWPJD9ykOZ0QCjNeznPDr6whqZ9NGMNF12Mw@mail.gmail.com>
Fixes: fb652fdfe8 ("macvlan/macvtap: Remove NETIF_F_UFO advertisement.")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems that the intention of the code is to null check the value
returned by function genlmsg_put. But the current code is null
checking the address of the pointer that holds the value returned
by genlmsg_put.
Fix this by properly null checking the value returned by function
genlmsg_put in order to avoid a pontential null pointer dereference.
Addresses-Coverity-ID: 1461561 ("Dereference before null check")
Addresses-Coverity-ID: 1461562 ("Dereference null return value")
Fixes: 96fbc13d7e ("openvswitch: Add meter infrastructure")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warnings:
net/openvswitch/flow_netlink.c:340:8: warning:
symbol 'ovs_nsh_key_attr_size' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error, the function ovs_meter_cmd_reply_start() returns
ERR_PTR() not NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: 96fbc13d7e ("openvswitch: Add meter infrastructure")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
OVS kernel datapath so far does not support Openflow meter action.
This is the first stab at adding kernel datapath meter support.
This implementation supports only drop band type.
Signed-off-by: Andy Zhou <azhou@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Later patches will invoke get_dp() outside of datapath.c. Export it.
Signed-off-by: Andy Zhou <azhou@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
v16->17
- Fixed disputed check code: keep them in nsh_push and nsh_pop
but also add them in __ovs_nla_copy_actions
v15->v16
- Add csum recalculation for nsh_push, nsh_pop and set_nsh
pointed out by Pravin
- Move nsh key into the union with ipv4 and ipv6 and add
check for nsh key in match_validate pointed out by Pravin
- Add nsh check in validate_set and __ovs_nla_copy_actions
v14->v15
- Check size in nsh_hdr_from_nlattr
- Fixed four small issues pointed out By Jiri and Eric
v13->v14
- Rename skb_push_nsh to nsh_push per Dave's comment
- Rename skb_pop_nsh to nsh_pop per Dave's comment
v12->v13
- Fix NSH header length check in set_nsh
v11->v12
- Fix missing changes old comments pointed out
- Fix new comments for v11
v10->v11
- Fix the left three disputable comments for v9
but not fixed in v10.
v9->v10
- Change struct ovs_key_nsh to
struct ovs_nsh_key_base base;
__be32 context[NSH_MD1_CONTEXT_SIZE];
- Fix new comments for v9
v8->v9
- Fix build error reported by daily intel build
because nsh module isn't selected by openvswitch
v7->v8
- Rework nested value and mask for OVS_KEY_ATTR_NSH
- Change pop_nsh to adapt to nsh kernel module
- Fix many issues per comments from Jiri Benc
v6->v7
- Remove NSH GSO patches in v6 because Jiri Benc
reworked it as another patch series and they have
been merged.
- Change it to adapt to nsh kernel module added by NSH
GSO patch series
v5->v6
- Fix the rest comments for v4.
- Add NSH GSO support for VxLAN-gpe + NSH and
Eth + NSH.
v4->v5
- Fix many comments by Jiri Benc and Eric Garver
for v4.
v3->v4
- Add new NSH match field ttl
- Update NSH header to the latest format
which will be final format and won't change
per its author's confirmation.
- Fix comments for v3.
v2->v3
- Change OVS_KEY_ATTR_NSH to nested key to handle
length-fixed attributes and length-variable
attriubte more flexibly.
- Remove struct ovs_action_push_nsh completely
- Add code to handle nested attribute for SET_MASKED
- Change PUSH_NSH to use the nested OVS_KEY_ATTR_NSH
to transfer NSH header data.
- Fix comments and coding style issues by Jiri and Eric
v1->v2
- Change encap_nsh and decap_nsh to push_nsh and pop_nsh
- Dynamically allocate struct ovs_action_push_nsh for
length-variable metadata.
OVS master and 2.8 branch has merged NSH userspace
patch series, this patch is to enable NSH support
in kernel data path in order that OVS can support
NSH in compat mode by porting this.
Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Eric Garver <e@erig.me>
Acked-by: Pravin Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows reliable identification of netdevice interfaces connected
to openvswitch bridges. In particular, user space queries the netdev
interfaces belonging to the ports for statistics, up/down state, etc.
Datapath dump needs to provide enough information for the user space to be
able to do that.
Currently, only interface names are returned. This is not sufficient, as
openvswitch allows its ports to be in different name spaces and the
interface name is valid only in its name space. What is needed and generally
used in other netlink APIs, is the pair ifindex+netnsid.
The solution is addition of the ifindex+netnsid pair (or only ifindex if in
the same name space) to vport get/dump operation.
On request side, ideally the ifindex+netnsid pair could be used to
get/set/del the corresponding vport. This is not implemented by this patch
and can be added later if needed.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
