Add selftest file for the link layer tests of a NIC driver.
Test for auto-negotiation is added.
Add LinkConfig class for changing link layer configs.
Selftest makes use of ksft modules and ethtool.
Include selftest file in the Makefile.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bpf_offload caught a spurious warning in TC recently, but the error
message did not provide enough information to know what the problem
is:
FAIL: Found 'netdevsim' in command output, leaky extack?
Add the extack to the output:
FAIL: Unexpected command output, leaky extack? ('netdevsim', 'Warning: Filter with specified priority/protocol not found.')
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
Pull pidfs update from Christian Brauner:
"This adds a new ioctl to retrieve information about a pidfd.
A common pattern when using pidfds is having to get information about
the process, which currently requires /proc being mounted, resolving
the fd to a pid, and then do manual string parsing of /proc/N/status
and friends. This needs to be reimplemented over and over in all
userspace projects (e.g.: it has been reimplemented in systemd, dbus,
dbus-daemon, polkit so far), and requires additional care in checking
that the fd is still valid after having parsed the data, to avoid
races.
Having a programmatic API that can be used directly removes all these
requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct so that
more parameters can be added later if needed. Start with returning
pid/tgid/ppid and some creds unconditionally, and cgroupid optionally"
* tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfd: add ioctl to retrieve pid info
Pull overlayfs updates from Christian Brauner:
"Make overlayfs support specifying layers through file descriptors.
Currently overlayfs only allows specifying layers through path names.
This is inconvenient for users that want to assemble an overlayfs
mount purely based on file descriptors:
This enables user to specify both:
fsconfig(fd_overlay, FSCONFIG_SET_FD, "upperdir+", NULL, fd_upper);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "workdir+", NULL, fd_work);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower1);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower2);
in addition to:
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "upperdir+", "/upper", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "workdir+", "/work", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower1", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower2", 0);
There's also a large set of new overlayfs selftests to test new
features and some older properties"
* tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add test for specifying 500 lower layers
selftests: add overlayfs fd mounting selftests
selftests: use shared header
Documentation,ovl: document new file descriptor based layers
ovl: specify layers via file descriptors
fs: add helper to use mount option as path or fd
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
llvm 19 fails to compile arena self test:
CLNG-BPF [test_progs] verifier_arena_large.bpf.o
progs/verifier_arena_large.c:90:24: error: unsupported signed division, please convert to unsigned div/mod.
90 | pg_idx = (pg - base) / PAGE_SIZE;
Though llvm <= 18 and llvm >= 20 don't have this issue,
fix the test to avoid the build error.
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Create selftests for PCIe BW control through the PCIe cooling device sysfs
interface.
First, the BW control selftest finds the PCIe Port to test with. By
default, the PCIe Port with the highest Link Speed is selected but
another PCIe Port can be provided with -d parameter.
The actual test steps the cur_state of the cooling device one-by-one
from max_state to what the cur_state was initially. The speed change
is confirmed by observing the current_link_speed for the corresponding
PCIe Port.
Link: https://lore.kernel.org/r/20241018144755.7875-10-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Check that only one notification is produced for various FDB edit
operations.
Regarding the ip_link_add() and ip_link_master() helpers. This pattern of
action plus corresponding defer is bound to come up often, and a dedicated
vocabulary to capture it will be handy. tunnel_create() and vlan_create()
from forwarding/lib.sh are somewhat opaque and perhaps too kitchen-sinky,
so I tried to go in the opposite direction with these ones, and wrapped
only the bare minimum to schedule a corresponding cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/910c5880ae6d3b558d6889cbdba2be690c2615c6.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For logging to be useful, something has to set RET and retmsg by calling
ret_set_ksft_status(). There is a suite of functions to that end in
forwarding/lib: check_err, check_fail et.al. Move them to net/lib.sh so
that every net test can use them.
Existing lib.sh users might be using these same names for their functions.
However lib.sh is always sourced near the top of the file (checked), and
whatever new definitions will simply override the ones provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/f488a00dc85b8e0c1f3c71476b32b21b5189a847.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It would be good to use the same mechanism for scheduling and dispatching
general net tests as the many forwarding tests already use. To that end,
move the logging helpers to net/lib.sh so that every net test can use them.
Existing lib.sh users might be using the name themselves. However lib.sh is
always sourced near the top of the file (checked), and whatever new
definition will simply override the one provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/a6fc083486493425b2c61185c327845b6ce3233a.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Many net selftests invent their own logging helpers. These really should be
in a library sourced by these tests. Currently forwarding/lib.sh has a
suite of perfectly fine logging helpers, but sourcing a forwarding/ library
from a higher-level directory smells of layering violation. In this patch,
move the logging helpers to net/lib.sh so that every net test can use them.
Together with the logging helpers, it's also necessary to move
pause_on_fail(), and EXIT_STATUS and RET.
Existing lib.sh users might be using these same names for their functions
or variables. However lib.sh is always sourced near the top of the
file (checked), and whatever new definitions will simply override the ones
provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/edd3785a3bd72ffbe1409300989e993ee50ae98b.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Update .gitignore in selftest to skip conntrack_reverse_clash,
from Li Zhijian.
2) Fix conntrack_dump_flush return values, from Guan Jing.
3) syzbot found that ipset's bitmap type does not properly checks for
bitmap's first ip, from Jeongjun Park.
* tag 'nf-24-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: add missing range check in bitmap_ip_uadt
selftests: netfilter: Fix missing return values in conntrack_dump_flush
selftests: netfilter: Add missing gitignore file
====================
Link: https://patch.msgid.link/20241114125723.82229-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau says:
====================
pull-request: bpf-next 2024-11-14
We've added 9 non-merge commits during the last 4 day(s) which contain
a total of 3 files changed, 226 insertions(+), 84 deletions(-).
The main changes are:
1) Fixes to bpf_msg_push/pop_data and test_sockmap. The changes has
dependency on the other changes in the bpf-next/net branch,
from Zijian Zhang.
2) Drop netns codes from mptcp test. Reuse the common helpers in
test_progs, from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf, sockmap: Fix sk_msg_reset_curr
bpf, sockmap: Several fixes to bpf_msg_pop_data
bpf, sockmap: Several fixes to bpf_msg_push_data
selftests/bpf: Add more tests for test_txmsg_push_pop in test_sockmap
selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmap
selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmap
selftests/bpf: Fix SENDPAGE data logic in test_sockmap
selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmap
selftests/bpf: Drop netns helpers in mptcp
====================
Link: https://patch.msgid.link/20241114202832.3187927-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
