Pull drm fixes from Dave Airlie:
"Regular weekly merge request, mostly amdgpu and misc bits in
xe/etnaviv/gma500 and some core changes. Nothing too outlandish, seems
to be about normal for this time of release.
atomic-helpers:
- Fix memory leak in drm_format_conv_state_copy()
fbdev:
- fbdefio: Fix address calculation
amdgpu:
- Suspend/resume fix
- Don't expose gpu_od directory if it's empty
- SDMA 4.4.2 fix
- VPE fix
- BO eviction fix
- UMSCH fix
- SMU 13.0.6 reset fixes
- GPUVM flush accounting fix
- SDMA 5.2 fix
- Fix possible UAF in mes code
amdkfd:
- Eviction fence handling fix
- Fix memory leak when GPU memory allocation fails
- Fix dma-buf validation
- Fix rescheduling of restore worker
- SVM fix
gma500:
- Fix crash during boot
etnaviv:
- fix GC7000 TX clock gating
- revert NPU UAPI changes
xe:
- Fix error paths on managed allocations
- Fix PF/VF relay messages"
* tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
Revert "drm/etnaviv: Expose a few more chipspecs to userspace"
drm/etnaviv: fix tx clock gating on some GC7000 variants
drm/xe/guc: Fix arguments passed to relay G2H handlers
drm/xe: call free_gsc_pkt only once on action add failure
drm/xe: Remove sysfs only once on action add failure
fbdev: fix incorrect address computation in deferred IO
drm/amdgpu/mes: fix use-after-free issue
drm/amdgpu/sdma5.2: use legacy HDP flush for SDMA2/3
drm/amdgpu: Fix the ring buffer size for queue VM flush
drm/amdkfd: Add VRAM accounting for SVM migration
drm/amd/pm: Restore config space after reset
drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspend
drm/amdkfd: Fix rescheduling of restore worker
drm/amdgpu: Update BO eviction priorities
drm/amdgpu/vpe: fix vpe dpm setup failed
drm/amdgpu: Assign correct bits for SDMA HDP flush
drm/amdgpu/pm: Remove gpu_od if it's an empty directory
drm/amdkfd: make sure VM is ready for updating operations
drm/amdgpu: Fix leak when GPU memory allocation fails
drm/amdkfd: Fix eviction fence handling
...
This reverts commit 1dccdba084.
In userspace a different approach was choosen - hwdb. As a result, there
is no need for these values.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This commit cleans up the uapi for vhost_vdpa by
better naming some of the enums which report blk
information to user space, and they are not
in any official releases yet.
Fixes: 1ac61ddfee ("vDPA: report virtio-blk flush info to user space")
Fixes: ae1374b7f7 ("vDPA: report virtio-block read-only info to user space")
Fixes: 330b8aea69 ("vDPA: report virtio-block max segment size to user space")
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240415111047.1047774-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VDPA_GET_VRING_SIZE by mistake uses the already occupied
ioctl # 0x80 and we never noticed - it happens to work
because the direction and size are different, but confuses
tools such as perf which like to look at just the number,
and breaks the extra robustness of the ioctl numbering macros.
To fix, sort the entries and renumber the ioctl - not too late
since it wasn't in any released kernels yet.
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 1496c47065 ("vhost-vdpa: uapi to support reporting per vq size")
Cc: "Zhu Lingshan" <lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <41c1c5489688abe5bfef9f7cf15584e3fb872ac5.1712092759.git.mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Pull SCSI fixes and updates from James Bottomley:
"Fully half this pull is updates to lpfc and qla2xxx which got
committed just as the merge window opened. A sizeable fraction of the
driver updates are simple bug fixes (and lock reworks for bug fixes in
the case of lpfc), so rather than splitting the few actual
enhancements out, we're just adding the drivers to the -rc1 pull.
The enhancements for lpfc are log message removals, copyright updates
and three patches redefining types. For qla2xxx it's just removing a
debug message on module removal and the manufacturer detail update.
The two major fixes are the sg teardown race and a core error leg
problem with the procfs directory not being removed if we destroy a
created host that never got to the running state. The rest are minor
fixes and constifications"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
scsi: core: Fix unremoved procfs host directory regression
scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
scsi: sd: Fix TCG OPAL unlock on system resume
scsi: sg: Avoid sg device teardown race
scsi: lpfc: Copyright updates for 14.4.0.1 patches
scsi: lpfc: Update lpfc version to 14.4.0.1
scsi: lpfc: Define types in a union for generic void *context3 ptr
scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
scsi: lpfc: Use a dedicated lock for ras_fwlog state
scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
scsi: lpfc: Remove unnecessary log message in queuecommand path
scsi: qla2xxx: Update version to 10.02.09.200-k
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
...
Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver
prints this WARNING message:
memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1)
WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr]
The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8
replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended
to be a flexible length array, so the WARN is a false positive.
To suppress the WARN, remove the constant number '1' from the array
declaration and clarify that it has flexible length. Also, adjust the
memory allocation size to match the change.
Suggested-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240323084155.166835-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
Pull virtio updates from Michael Tsirkin:
- Per vq sizes in vdpa
- Info query for block devices support in vdpa
- DMA sync callbacks in vduse
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (35 commits)
virtio_net: rename free_old_xmit_skbs to free_old_xmit
virtio_net: unify the code for recycling the xmit ptr
virtio-net: add cond_resched() to the command waiting loop
virtio-net: convert rx mode setting to use workqueue
virtio: packed: fix unmap leak for indirect desc table
vDPA: report virtio-blk flush info to user space
vDPA: report virtio-block read-only info to user space
vDPA: report virtio-block write zeroes configuration to user space
vDPA: report virtio-block discarding configuration to user space
vDPA: report virtio-block topology info to user space
vDPA: report virtio-block MQ info to user space
vDPA: report virtio-block max segments in a request to user space
vDPA: report virtio-block block-size to user space
vDPA: report virtio-block max segment size to user space
vDPA: report virtio-block capacity to user space
virtio: make virtio_bus const
vdpa: make vdpa_bus const
vDPA/ifcvf: implement vdpa_config_ops.get_vq_num_min
vDPA/ifcvf: get_max_vq_size to return max size
virtio_vdpa: create vqs with the actual size
...
This commits reports write zeroes configuration of
virtio-block devices to user space, includes:
1)maximum write zeroes sectors size
2)maximum write zeroes segment number
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240218185606.13509-9-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit reports virtio-blk discarding configuration
to user space,includes:
1) the maximum discard sectors
2) maximum number of discard segments for the block driver to use
3) the alignment for splitting a discarding request
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240218185606.13509-8-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit allows vDPA reporting topology information of
virtio-blk devices to user space, includes:
1) the number of logical blocks per physical block
2) offset of first aligned logical block
3) suggested minimum I/O size in blocks
4) optimal (suggested maximum) I/O size in blocks
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240218185606.13509-7-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 92792ac752 ("virtio-pci: Introduce admin command sending function")
added "__packed" structures to UAPI header linux/virtio_pci.h. This triggers
build failures in the consumer userspace applications without proper "definition"
of __packed (e.g., kvmtool build fails).
Moreover, the structures are already packed well, and doesn't need explicit
packing, similar to the rest of the structures in all virtio_* headers. Remove
the __packed attribute.
Fixes: 92792ac752 ("virtio-pci: Introduce admin command sending function")
Cc: Feng Liu <feliu@nvidia.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Message-Id: <20240125232039.913606-1-suzuki.poulose@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull rdma updates from Jason Gunthorpe:
"Very small update this cycle:
- Minor code improvements in fi, rxe, ipoib, mana, cxgb4, mlx5,
irdma, rxe, rtrs, mana
- Simplify the hns hem mechanism
- Fix EFA's MSI-X allocation in resource constrained configurations
- Fix a KASN splat in srpt
- Narrow hns's congestion control selection to QPs granularity and
allow userspace to select it
- Solve a parallel module loading race between the CM module and a
driver module
- Flexible array cleanup
- Dump hns's SCC Conext to 'rdma res' for debugging
- Make mana build page lists for HW objects that require a 0 offset
correctly
- Stuck CM ID debugging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (29 commits)
RDMA/cm: add timeout to cm_destroy_id wait
RDMA/mana_ib: Use virtual address in dma regions for MRs
RDMA/mana_ib: Fix bug in creation of dma regions
RDMA/hns: Append SCC context to the raw dump of QPC
RDMA/uverbs: Avoid -Wflex-array-member-not-at-end warnings
RDMA/hns: Support userspace configuring congestion control algorithm with QP granularity
RDMA/rtrs-clt: Check strnlen return len in sysfs mpath_policy_store()
RDMA/uverbs: Remove flexible arrays from struct *_filter
RDMA/device: Fix a race between mad_client and cm_client init
RDMA/hns: Fix mis-modifying default congestion control algorithm
RDMA/rxe: Remove unused 'iova' parameter from rxe_mr_init_user
RDMA/srpt: Do not register event handler until srpt device is fully setup
RDMA/irdma: Remove duplicate assignment
RDMA/efa: Limit EQs to available MSI-X vectors
RDMA/mlx5: Delete unused mlx5_ib_copy_pas prototype
RDMA/cxgb4: Delete unused c4iw_ep_redirect prototype
RDMA/mana_ib: Introduce mana_ib_install_cq_cb helper function
RDMA/mana_ib: Introduce mana_ib_get_netdev helper function
RDMA/mana_ib: Introduce mdev_to_gc helper function
RDMA/hns: Simplify 'struct hns_roce_hem' allocation
...
Pull tracing updates from Steven Rostedt:
"Main user visible change:
- User events can now have "multi formats"
The current user events have a single format. If another event is
created with a different format, it will fail to be created. That
is, once an event name is used, it cannot be used again with a
different format. This can cause issues if a library is using an
event and updates its format. An application using the older format
will prevent an application using the new library from registering
its event.
A task could also DOS another application if it knows the event
names, and it creates events with different formats.
The multi-format event is in a different name space from the single
format. Both the event name and its format are the unique
identifier. This will allow two different applications to use the
same user event name but with different payloads.
- Added support to have ftrace_dump_on_oops dump out instances and
not just the main top level tracing buffer.
Other changes:
- Add eventfs_root_inode
Only the root inode has a dentry that is static (never goes away)
and stores it upon creation. There's no reason that the thousands
of other eventfs inodes should have a pointer that never gets set
in its descriptor. Create a eventfs_root_inode desciptor that has a
eventfs_inode descriptor and a dentry pointer, and only the root
inode will use this.
- Added WARN_ON()s in eventfs
There's some conditionals remaining in eventfs that should never be
hit, but instead of removing them, add WARN_ON() around them to
make sure that they are never hit.
- Have saved_cmdlines allocation also include the map_cmdline_to_pid
array
The saved_cmdlines structure allocates a large amount of data to
hold its mappings. Within it, it has three arrays. Two are already
apart of it: map_pid_to_cmdline[] and saved_cmdlines[]. More memory
can be saved by also including the map_cmdline_to_pid[] array as
well.
- Restructure __string() and __assign_str() macros used in
TRACE_EVENT()
Dynamic strings in TRACE_EVENT() are declared with:
__string(name, source)
And assigned with:
__assign_str(name, source)
In the tracepoint callback of the event, the __string() is used to
get the size needed to allocate on the ring buffer and
__assign_str() is used to copy the string into the ring buffer.
There's a helper structure that is created in the TRACE_EVENT()
macro logic that will hold the string length and its position in
the ring buffer which is created by __string().
There are several trace events that have a function to create the
string to save. This function is executed twice. Once for
__string() and again for __assign_str(). There's no reason for
this. The helper structure could also save the string it used in
__string() and simply copy that into __assign_str() (it also
already has its length).
By using the structure to store the source string for the
assignment, it means that the second argument to __assign_str() is
no longer needed.
It will be removed in the next merge window, but for now add a
warning if the source string given to __string() is different than
the source string given to __assign_str(), as the source to
__assign_str() isn't even used and will be going away.
- Added checks to make sure that the source of __string() is also the
source of __assign_str() so that it can be safely removed in the
next merge window.
Included fixes that the above check found.
- Other minor clean ups and fixes"
* tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
tracing: Add __string_src() helper to help compilers not to get confused
tracing: Use strcmp() in __assign_str() WARN_ON() check
tracepoints: Use WARN() and not WARN_ON() for warnings
tracing: Use div64_u64() instead of do_div()
tracing: Support to dump instance traces by ftrace_dump_on_oops
tracing: Remove second parameter to __assign_rel_str()
tracing: Add warning if string in __assign_str() does not match __string()
tracing: Add __string_len() example
tracing: Remove __assign_str_len()
ftrace: Fix most kernel-doc warnings
tracing: Decrement the snapshot if the snapshot trigger fails to register
tracing: Fix snapshot counter going between two tracers that use it
tracing: Use EVENT_NULL_STR macro instead of open coding "(null)"
tracing: Use ? : shortcut in trace macros
tracing: Do not calculate strlen() twice for __string() fields
tracing: Rework __assign_str() and __string() to not duplicate getting the string
cxl/trace: Properly initialize cxl_poison region name
net: hns3: tracing: fix hclgevf trace event strings
drm/i915: Add missing ; to __assign_str() macros in tracepoint code
NFSD: Fix nfsd_clid_class use of __string_len() macro
...
