Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- sched: sch_taprio: do not schedule in taprio_reset()
Previous releases - regressions:
- core: fix UaF in netns ops registration error path
- ipv4: prevent potential spectre v1 gadgets
- ipv6: fix reachability confirmation with proxy_ndp
- netfilter: fix for the set rbtree
- eth: fec: use page_pool_put_full_page when freeing rx buffers
- eth: iavf: fix temporary deadlock and failure to set MAC address
Previous releases - always broken:
- netlink: prevent potential spectre v1 gadgets
- netfilter: fixes for SCTP connection tracking
- mctp: struct sock lifetime fixes
- eth: ravb: fix possible hang if RIS2_QFF1 happen
- eth: tg3: resolve deadlock in tg3_reset_task() during EEH
Misc:
- Mat stepped out as MPTCP co-maintainer"
* tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: mdio-mux-meson-g12a: force internal PHY off on mux switch
docs: networking: Fix bridge documentation URL
tsnep: Fix TX queue stop/wake for multiple queues
net/tg3: resolve deadlock in tg3_reset_task() during EEH
net: mctp: mark socks as dead on unhash, prevent re-add
net: mctp: hold key reference when looking up a general key
net: mctp: move expiry timer delete to unhash
net: mctp: add an explicit reference from a mctp_sk_key to sock
net: ravb: Fix possible hang if RIS2_QFF1 happen
net: ravb: Fix lack of register setting after system resumed for Gen3
net/x25: Fix to not accept on connected socket
ice: move devlink port creation/deletion
sctp: fail if no bound addresses can be used for a given scope
net/sched: sch_taprio: do not schedule in taprio_reset()
Revert "Merge branch 'ethtool-mac-merge'"
netrom: Fix use-after-free of a listening socket.
netfilter: conntrack: unify established states for SCTP paths
Revert "netfilter: conntrack: add sctp DATA_SENT state"
netfilter: conntrack: fix bug in for_each_sctp_chunk
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
...
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit 90fda63fa1 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c43993777 ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok
as long as only a single TX queue is supported. But support for multiple
TX queues was introduced with 762031375d and I missed to adapt stop
and wake of TX queues.
Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific
TX queue.
Fixes: 762031375d ("tsnep: Support multiple TX/RX queue pairs")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During EEH error injection testing, a deadlock was encountered in the tg3
driver when tg3_io_error_detected() was attempting to cancel outstanding
reset tasks:
crash> foreach UN bt
...
PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd"
...
#5 [c00000000681f990] __cancel_work_timer at c00000000019fd18
#6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3]
#7 [c00000000681faf0] eeh_report_error at c00000000004e25c
...
PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1"
...
#4 [c00000003721fbc0] rtnl_lock at c000000000c940d8
#5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3]
#6 [c00000003721fc60] process_one_work at c00000000019e5c4
...
PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1"
...
#4 [c000000037247bc0] rtnl_lock at c000000000c940d8
#5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3]
#6 [c000000037247c60] process_one_work at c00000000019e5c4
...
PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2"
...:1
#4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8
#5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3]
#6 [c0000000373ebc60] process_one_work at c00000000019e5c4
...
Code inspection shows that both tg3_io_error_detected() and
tg3_reset_task() attempt to acquire the RTNL lock at the beginning of
their code blocks. If tg3_reset_task() should happen to execute between
the times when tg3_io_error_deteced() acquires the RTNL lock and
tg3_reset_task_cancel() is called, a deadlock will occur.
Moving tg3_reset_task_cancel() call earlier within the code block, prior
to acquiring RTNL, prevents this from happening, but also exposes another
deadlock issue where tg3_reset_task() may execute AFTER
tg3_io_error_detected() has executed:
crash> foreach UN bt
PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd"
...
#4 [c000000006867a60] rtnl_lock at c000000000c940d8
#5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3]
#6 [c000000006867b00] eeh_report_reset at c00000000004de88
...
PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1"
...
#3 [c000000036c1bb70] msleep at c000000000259e6c
#4 [c000000036c1bba0] napi_disable at c000000000c6b848
#5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3]
#6 [c000000036c1bc60] process_one_work at c00000000019e5c4
...
This issue can be avoided by aborting tg3_reset_task() if EEH error
recovery is already in progress.
Fixes: db84bf43ef ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull fuse ACL fix from Christian Brauner:
"The new posix acl API doesn't depend on the xattr handler
infrastructure anymore and instead only relies on the posix acl inode
operations. As a result daemons without FUSE_POSIX_ACL are unable to
use posix acls like they used to.
Fix this by copying what we did for overlayfs during the posix acl api
conversion. Make fuse implement a dedicated ->get_inode_acl() method
as does overlayfs. Fuse can then also uses this to express different
needs for vfs permission checking during lookup and acl based
retrieval via the regular system call path.
This allows fuse to continue to refuse retrieving posix acls for
daemons that don't set FUSE_POSXI_ACL for permission checking while
also allowing a fuse server to retrieve it via the usual system calls"
* tag 'fs.fuse.acl.v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fuse: fixes after adapting to new posix acl api
Jeremy Kerr says:
====================
net: mctp: struct sock lifetime fixes
This series is a set of fixes for the sock lifetime handling in the
AF_MCTP code, fixing a uaf reported by Noam Rathaus
<noamr@ssd-disclosure.com>.
The Fixes: tags indicate the original patches affected, but some
tweaking to backport to those commits may be needed; I have a separate
branch with backports to 5.15 if that helps with stable trees.
Of course, any comments/queries most welcome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Once a socket has been unhashed, we want to prevent it from being
re-used in a sk_key entry as part of a routing operation.
This change marks the sk as SOCK_DEAD on unhash, which prevents addition
into the net's key list.
We need to do this during the key add path, rather than key lookup, as
we release the net keys_lock between those operations.
Fixes: 4a992bbd36 ("mctp: Implement message fragmentation & reassembly")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we have a race where we look up a sock through a "general"
(ie, not directly associated with the (src,dest,tag) tuple) key, then
drop the key reference while still holding the key's sock.
This change expands the key reference until we've finished using the
sock, and hence the sock reference too.
Commit message changes from Jeremy Kerr <jk@codeconstruct.com.au>.
Reported-by: Noam Rathaus <noamr@ssd-disclosure.com>
Fixes: 73c618456d ("mctp: locking, lifetime and validity changes for sk_keys")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we delete the key expiry timer (in sk->close) before
unhashing the sk. This means that another thread may find the sk through
its presence on the key list, and re-queue the timer.
This change moves the timer deletion to the unhash, after we have made
the key no longer observable, so the timer cannot be re-queued.
Fixes: 7b14e15ae6 ("mctp: Implement a timeout for tags")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we correlate the mctp_sk_key lifetime to the sock lifetime
through the sock hash/unhash operations, but this is pretty tenuous, and
there are cases where we may have a temporary reference to an unhashed
sk.
This change makes the reference more explicit, by adding a hold on the
sock when it's associated with a mctp_sk_key, released on final key
unref.
Fixes: 73c618456d ("mctp: locking, lifetime and validity changes for sk_keys")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since this driver enables the interrupt by RIC2_QFE1, this driver
should clear the interrupt flag if it happens. Otherwise, the interrupt
causes to hang the system.
Note that this also fix a minor coding style (a comment indentation)
around the fixed code.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
After system entered Suspend to RAM, registers setting of this
hardware is reset because the SoC will be turned off. On R-Car Gen3
(info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So,
after system resumed, it lacks of the initial settings for ptp. So,
add ravb_ptp_{init,stop}() into ravb_{resume,suspend}().
Fixes: f5d7837f96 ("ravb: ptp: Add CONFIG mode support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
When listen() and accept() are called on an x25 socket
that connect() succeeds, accept() succeeds immediately.
This is because x25_connect() queues the skb to
sk->sk_receive_queue, and x25_accept() dequeues it.
This creates a child socket with the sk of the parent
x25 socket, which can cause confusion.
Fix x25_listen() to return -EINVAL if the socket has
already been successfully connect()ed to avoid this issue.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
A listening socket linked to a sockmap has its sk_prot overridden. It
points to one of the struct proto variants in tcp_bpf_prots. The variant
depends on the socket's family and which sockmap programs are attached.
A child socket cloned from a TCP listener initially inherits their sk_prot.
But before cloning is finished, we restore the child's proto to the
listener's original non-tcp_bpf_prots one. This happens in
tcp_create_openreq_child -> tcp_bpf_clone.
Today, in tcp_bpf_clone we detect if the child's proto should be restored
by checking only for the TCP_BPF_BASE proto variant. This is not
correct. The sk_prot of listening socket linked to a sockmap can point to
to any variant in tcp_bpf_prots.
If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then
the child socket unintentionally is left if the inherited sk_prot by
tcp_bpf_clone.
This leads to issues like infinite recursion on close [1], because the
child state is otherwise not set up for use with tcp_bpf_prot operations.
Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants.
Note that it wouldn't be sufficient to check the socket state when
overriding the sk_prot in tcp_bpf_update_proto in order to always use the
TCP_BPF_BASE variant for listening sockets. Since commit
b8b8315e39 ("bpf, sockmap: Remove unhash handler for BPF sockmap usage")
it is possible for a socket to transition to TCP_LISTEN state while already
linked to a sockmap, e.g. connect() -> insert into map ->
connect(AF_UNSPEC) -> listen().
[1]: https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/
Fixes: e80251555f ("tcp_bpf: Don't let child socket inherit parent protocol ops on copy")
Reported-by: syzbot+04c21ed96d861dccc5cd@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20230113-sockmap-fix-v2-2-1e0ee7ac2f90@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Perform SCTP vtag verification for ABORT/SHUTDOWN_COMPLETE according
to RFC 9260, Sect 8.5.1.
2) Fix infinite loop if SCTP chunk size is zero in for_each_sctp_chunk().
And remove useless check in this macro too.
3) Revert DATA_SENT state in the SCTP tracker, this was applied in the
previous merge window. Next patch in this series provides a more
simple approach to multihoming support.
4) Unify HEARTBEAT_ACKED and ESTABLISHED states for SCTP multihoming
support, use default ESTABLISHED of 210 seconds based on
heartbeat timeout * maximum number of retransmission + round-trip timeout.
Otherwise, SCTP conntrack entry that represents secondary paths
remain stale in the table for up to 5 days.
This is a slightly large batch with fixes for the SCTP connection
tracking helper, all patches from Sriram Yagnaraman.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: unify established states for SCTP paths
Revert "netfilter: conntrack: add sctp DATA_SENT state"
netfilter: conntrack: fix bug in for_each_sctp_chunk
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
====================
Link: https://lore.kernel.org/r/20230124183933.4752-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a286ba7387 ("ice: reorder PF/representor devlink
port register/unregister flows") moved the code to create
and destroy the devlink PF port. This was fine, but created
a corner case issue in the case of ice_register_netdev()
failing. In that case, the driver would end up calling
ice_devlink_destroy_pf_port() twice.
Additionally, it makes no sense to tie creation of the devlink
PF port to the creation of the netdev so separate out the
code to create/destroy the devlink PF port from the netdev
code. This makes it a cleaner interface.
Fixes: a286ba7387 ("ice: reorder PF/representor devlink port register/unregister flows")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, if you bind the socket to something like:
servaddr.sin6_family = AF_INET6;
servaddr.sin6_port = htons(0);
servaddr.sin6_scope_id = 0;
inet_pton(AF_INET6, "::1", &servaddr.sin6_addr);
And then request a connect to:
connaddr.sin6_family = AF_INET6;
connaddr.sin6_port = htons(20000);
connaddr.sin6_scope_id = if_nametoindex("lo");
inet_pton(AF_INET6, "fe88::1", &connaddr.sin6_addr);
What the stack does is:
- bind the socket
- create a new asoc
- to handle the connect
- copy the addresses that can be used for the given scope
- try to connect
But the copy returns 0 addresses, and the effect is that it ends up
trying to connect as if the socket wasn't bound, which is not the
desired behavior. This unexpected behavior also allows KASLR leaks
through SCTP diag interface.
The fix here then is, if when trying to copy the addresses that can
be used for the scope used in connect() it returns 0 addresses, bail
out. This is what TCP does with a similar reproducer.
Reported-by: Pietro Borrello <borrello@diag.uniroma1.it>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/9fcd182f1099f86c6661f3717f63712ddd1c676c.1674496737.git.marcelo.leitner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull module fix from Luis Chamberlain:
"Theis is a fix we have been delaying for v6.2 due to lack of early
testing on linux-next.
The commit has been sitting in linux-next since December and testing
has also been now a bit extensive by a few developers. Since this is a
fix which definitely will go to v6.3 it should also apply to v6.2 so
if there are any issues we pick them up earlier rather than later. The
fix fixes a regression since v5.3, prior to me helping with module
maintenance, however, the issue is real in that in the worst case now
can prevent boot.
We've discussed all possible corner cases [0] and at last do feel this
is ready for v6.2-rc6"
Link https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/ [0]
* tag 'modules-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Don't wait for GOING modules
