When executing the command "perf list", I met "Error: failed to open
tracing events directory" twice, the first reason is that there is no
"/sys/kernel/tracing/events" directory due to it does not enable the
kernel tracing infrastructure with CONFIG_FTRACE, the second reason
is that there is no root privileges.
Add the error string to tell the users what happened and what should
to do, and also call put_tracing_file() to free events_path a little
later to avoid messy code in the error message.
At the same time, just remove the redundant "/" of the file path in
the function get_tracing_file(), otherwise it shows something like
"/sys/kernel/tracing//events".
Before:
$ ./perf list
Error: failed to open tracing events directory
After:
(1) Without CONFIG_FTRACE
$ ./perf list
Error: failed to open tracing events directory
/sys/kernel/tracing/events: No such file or directory
(2) With CONFIG_FTRACE but no root privileges
$ ./perf list
Error: failed to open tracing events directory
/sys/kernel/tracing/events: Permission denied
Committer testing:
Redirect stdout to null to quickly test the patch:
Before:
$ perf list > /dev/null
Error: failed to open tracing events directory
$
After:
$ perf list > /dev/null
Error: failed to open tracing events directory
/sys/kernel/tracing/events: Permission denied
$
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/20240730062301.23244-3-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In general a read fills 4kb so filling the buffer is a 1 in 4096
operation, move it out of the io__get_char function to avoid some
checking overhead and to better hint the function is good to inline.
For perf's IO intensive internal (non-rigorous) benchmarks there's a
small improvement to kallsyms-parsing with a default build.
Before:
```
$ perf bench internals all
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 146.322 usec (+- 0.305 usec)
Average num. events: 61.000 (+- 0.000)
Average time per event 2.399 usec
Average data synthesis took: 145.056 usec (+- 0.155 usec)
Average num. events: 329.000 (+- 0.000)
Average time per event 0.441 usec
Average kallsyms__parse took: 162.313 ms (+- 0.599 ms)
...
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 53.720 usec (+- 7.823 usec)
Average PMU scanning took: 375.145 usec (+- 23.974 usec)
```
After:
```
$ perf bench internals all
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 127.829 usec (+- 0.079 usec)
Average num. events: 61.000 (+- 0.000)
Average time per event 2.096 usec
Average data synthesis took: 133.652 usec (+- 0.101 usec)
Average num. events: 327.000 (+- 0.000)
Average time per event 0.409 usec
Average kallsyms__parse took: 150.415 ms (+- 0.313 ms)
...
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 47.790 usec (+- 1.178 usec)
Average PMU scanning took: 376.945 usec (+- 23.683 usec)
```
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240519181716.4088459-1-irogers@google.com
Multiple threads, such as with "perf top", may race to initialize a
file system path like hugetlbfs. The racy initialization of the path
leads to at least memory leaks. To avoid this initialize each fs for
reading the mount point path with pthread_once.
Mounting the file system may also be racy, so introduce a mutex over
the function. This does mean that the path is being accessed with and
without a mutex, which is inherently racy but hopefully benign,
especially as there are fewer callers to fs__mount.
Remove the fs__entries by directly using global variables, this was
done as no argument like the index can be passed to the init once
routine.
Issue found and tested with "perf top" and address sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230609224004.180988-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and Kconfig help messages in the tracing code still refer
to this older debugfs path, so let's update them to avoid confusion.
Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
perf record __cmd_record() does not poll evlist pollfds. Instead it polls
thread_data[0].pollfd. That happens whether or not threads are being used.
perf record duplicates evlist mmap pollfds as needed for separate threads.
The non-perf-event represented by evlist->ctl_fd has to handled separately,
which is done explicitly, duplicating it into the thread_data[0] pollfds.
That approach neglects any other non-perf-event file descriptors. Currently
there is also done_fd which needs the same handling.
Add a new generalized approach.
Add fdarray_flag__non_perf_event to identify the file descriptors that
need the special handling. For those cases, also keep a mapping of the
evlist pollfd index and thread pollfd index, so that the evlist revents
can be updated.
Although this patch adds the new handling, it does not take it into use.
There is no functional change, but it is the precursor to a fix, so is
marked as a fix.
Fixes: 415ccb58f6 ("perf record: Introduce thread specific data array")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220824072814.16422-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
