When audit is enabled in a kernel build, and there are no LSMs active
that support LSM labeling, it is possible that local variable lsmctx
in the AUDIT_SIGNAL_INFO handler in audit_receive_msg() could be used
before it is properly initialize. Then kmalloc() will try to allocate
a large amount of memory with the uninitialized length.
This patch corrects this problem by initializing the lsmctx to a safe
value when it is declared, which avoid errors like:
WARNING: CPU: 2 PID: 443 at mm/page_alloc.c:4727 __alloc_pages_noprof
...
ra: 9000000003059644 ___kmalloc_large_node+0x84/0x1e0
ERA: 900000000304d588 __alloc_pages_noprof+0x4c8/0x1040
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000007 (+FPE +SXE +ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
CPU: 2 UID: 0 PID: 443 Comm: auditd Not tainted 6.13.0-rc1+ #1899
...
Call Trace:
[<9000000002def6a8>] show_stack+0x30/0x148
[<9000000002debf58>] dump_stack_lvl+0x68/0xa0
[<9000000002e0fe18>] __warn+0x80/0x108
[<900000000407486c>] report_bug+0x154/0x268
[<90000000040ad468>] do_bp+0x2a8/0x320
[<9000000002dedda0>] handle_bp+0x120/0x1c0
[<900000000304d588>] __alloc_pages_noprof+0x4c8/0x1040
[<9000000003059640>] ___kmalloc_large_node+0x80/0x1e0
[<9000000003061504>] __kmalloc_noprof+0x2c4/0x380
[<9000000002f0f7ac>] audit_receive_msg+0x764/0x1530
[<9000000002f1065c>] audit_receive+0xe4/0x1c0
[<9000000003e5abe8>] netlink_unicast+0x340/0x450
[<9000000003e5ae9c>] netlink_sendmsg+0x1a4/0x4a0
[<9000000003d9ffd0>] __sock_sendmsg+0x48/0x58
[<9000000003da32f0>] __sys_sendto+0x100/0x170
[<9000000003da3374>] sys_sendto+0x14/0x28
[<90000000040ad574>] do_syscall+0x94/0x138
[<9000000002ded318>] handle_syscall+0xb8/0x158
Fixes: 6fba89813c ("lsm: ensure the correct LSM context releaser")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[PM: resolved excessive line length in the backtrace]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Replace the (secctx,seclen) pointer pair with a single
lsm_context pointer to allow return of the LSM identifier
along with the context and context length. This allows
security_release_secctx() to know how to release the
context. Callers have been modified to use or save the
returned data from the new structure.
security_secid_to_secctx() and security_lsmproc_to_secctx()
will now return the length value on success instead of 0.
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak, kdoc fix, signedness fix from Dan Carpenter]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new lsm_context data structure to hold all the information about a
"security context", including the string, its size and which LSM allocated
the string. The allocation information is necessary because LSMs have
different policies regarding the lifecycle of these strings. SELinux
allocates and destroys them on each use, whereas Smack provides a pointer
to an entry in a list that never goes away.
Update security_release_secctx() to use the lsm_context instead of a
(char *, len) pair. Change its callers to do likewise. The LSMs
supporting this hook have had comments added to remind the developer
that there is more work to be done.
The BPF security module provides all LSM hooks. While there has yet to
be a known instance of a BPF configuration that uses security contexts,
the possibility is real. In the existing implementation there is
potential for multiple frees in that case.
Cc: linux-integrity@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: netfilter-devel@vger.kernel.org
To: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: linux-nfs@vger.kernel.org
Cc: Todd Kjos <tkjos@google.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull lsm updates from Paul Moore:
"Thirteen patches, all focused on moving away from the current 'secid'
LSM identifier to a richer 'lsm_prop' structure.
This move will help reduce the translation that is necessary in many
LSMs, offering better performance, and make it easier to support
different LSMs in the future"
* tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: remove lsm_prop scaffolding
netlabel,smack: use lsm_prop for audit data
audit: change context data from secid to lsm_prop
lsm: create new security_cred_getlsmprop LSM hook
audit: use an lsm_prop in audit_names
lsm: use lsm_prop in security_inode_getsecid
lsm: use lsm_prop in security_current_getsecid
audit: update shutdown LSM data
lsm: use lsm_prop in security_ipc_getsecid
audit: maintain an lsm_prop in audit_context
lsm: add lsmprop_to_secctx hook
lsm: use lsm_prop in security_audit_rule_match
lsm: add the lsm_prop data structure
The audit process LSM information is changed from a secid audit_sig_sid
to an lsm_prop in audit_sig_lsm. Update the users of this data
appropriately. Calls to security_secid_to_secctx() are changed to use
security_lsmprop_to_secctx() instead. security_current_getsecid_subj()
is scaffolded. It will be updated in a subsequent patch.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use str_enabled_disabled() helper instead of open
coding the same.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In a few audit records, PIDs were being recorded with task_pid_nr()
instead of task_tgid_nr().
$ grep "task_pid_nr" kernel/audit*.c
audit.c: task_pid_nr(current),
auditfilter.c: pid = task_pid_nr(current);
auditsc.c: audit_log_format(ab, " pid=%u", task_pid_nr(current));
For single-thread applications, the process id (pid) and the thread
group id (tgid) are the same. However, on multi-thread applications,
task_pid_nr() returns the current thread id (user-space's TID), while
task_tgid_nr() returns the main thread id (user-space's PID). Since
the users are more interested in the process id (pid), rather than the
thread id (tid), this patch converts these callers to the correct method.
Link: https://github.com/linux-audit/audit-kernel/issues/126
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
When auditd_set sets the auditd_conn pointer, audit messages can
immediately be put on the socket by other kernel threads. If the backlog
is large or the rate is high, this can immediately fill the socket
buffer. If the audit daemon requested an ACK for this operation, a full
socket buffer causes the ACK to get dropped, also setting ENOBUFS on the
socket.
To avoid this race and ensure ACKs get through, fast-track the ACK in
this specific case to ensure it is sent before auditd_conn is set.
Signed-off-by: Chris Riches <chris.riches@nutanix.com>
[PM: fix some tab vs space damage]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fixes following checkpatch.pl issue:
ERROR: trailing statements should be on next line
Signed-off-by: Atul Kumar Pant <atulpant.linux@gmail.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The ifdef-else logic is already in the header file, so include it
unconditionally, no functional changes here.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
[PM: fixed misspelling in the subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently nobody use is_audit_feature_set() outside this file, so make
it static.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
data_len is already getting checked if it's less than 2 earlier in this
function.
Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When an admin enables audit at early boot via the "audit=1" kernel
command line the audit queue behavior is slightly different; the
audit subsystem goes to greater lengths to avoid dropping records,
which unfortunately can result in problems when the audit daemon is
forcibly stopped for an extended period of time.
This patch makes a number of changes designed to improve the audit
queuing behavior so that leaving the audit daemon in a stopped state
for an extended period does not cause a significant impact to the
system.
- kauditd_send_queue() is now limited to looping through the
passed queue only once per call. This not only prevents the
function from looping indefinitely when records are returned
to the current queue, it also allows any recovery handling in
kauditd_thread() to take place when kauditd_send_queue()
returns.
- Transient netlink send errors seen as -EAGAIN now cause the
record to be returned to the retry queue instead of going to
the hold queue. The intention of the hold queue is to store,
perhaps for an extended period of time, the events which led
up to the audit daemon going offline. The retry queue remains
a temporary queue intended to protect against transient issues
between the kernel and the audit daemon.
- The retry queue is now limited by the audit_backlog_limit
setting, the same as the other queues. This allows admins
to bound the size of all of the audit queues on the system.
- kauditd_rehold_skb() now returns records to the end of the
hold queue to ensure ordering is preserved in the face of
recent changes to kauditd_send_queue().
Cc: stable@vger.kernel.org
Fixes: 5b52330bbf ("audit: fix auditd/kernel connection state tracking")
Fixes: f4b3ee3c85 ("audit: improve robustness of the audit queue handling")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull audit updates from Paul Moore:
"Four audit patches for v5.17:
- Harden the code through additional use of the struct_size() macro
and zero-length arrays to flexible-array conversions.
- Ensure that processes which generate userspace audit records are
not exempt from the kernel's audit throttling when the audit queues
are being overrun"
* tag 'audit-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: replace zero-length array with flexible-array member
audit: use struct_size() helper in audit_[send|make]_reply()
audit: ensure userspace is penalized the same as the kernel when under pressure
audit: use struct_size() helper in kmalloc()
Pull selinux updates from Paul Moore:
"Nothing too significant, but five SELinux patches for v5.17 that do
the following:
- Harden the code through additional use of the struct_size() macro
- Plug some memory leaks
- Clean up the code via removal of the security_add_mnt_opt() LSM
hook and minor tweaks to selinux_add_opt()
- Rename security_task_getsecid_subj() to better reflect its actual
behavior/use - now called security_current_getsecid_subj()"
* tag 'selinux-pr-20220110' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: minor tweaks to selinux_add_opt()
selinux: fix potential memleak in selinux_add_opt()
security,selinux: remove security_add_mnt_opt()
selinux: Use struct_size() helper in kmalloc()
lsm: security_task_getsecid_subj() -> security_current_getsecid_subj()
If the audit daemon were ever to get stuck in a stopped state the
kernel's kauditd_thread() could get blocked attempting to send audit
records to the userspace audit daemon. With the kernel thread
blocked it is possible that the audit queue could grow unbounded as
certain audit record generating events must be exempt from the queue
limits else the system enter a deadlock state.
This patch resolves this problem by lowering the kernel thread's
socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks
the kauditd_send_queue() function to better manage the various audit
queues when connection problems occur between the kernel and the
audit daemon. With this patch, the backlog may temporarily grow
beyond the defined limits when the audit daemon is stopped and the
system is under heavy audit pressure, but kauditd_thread() will
continue to make progress and drain the queues as it would for other
connection problems. For example, with the audit daemon put into a
stopped state and the system configured to audit every syscall it
was still possible to shutdown the system without a kernel panic,
deadlock, etc.; granted, the system was slow to shutdown but that is
to be expected given the extreme pressure of recording every syscall.
The timeout value of HZ/10 was chosen primarily through
experimentation and this developer's "gut feeling". There is likely
no one perfect value, but as this scenario is limited in scope (root
privileges would be needed to send SIGSTOP to the audit daemon), it
is likely not worth exposing this as a tunable at present. This can
always be done at a later date if it proves necessary.
Cc: stable@vger.kernel.org
Fixes: 5b52330bbf ("audit: fix auditd/kernel connection state tracking")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure. The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.
This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The security_task_getsecid_subj() LSM hook invites misuse by allowing
callers to specify a task even though the hook is only safe when the
current task is referenced. Fix this by removing the task_struct
argument to the hook, requiring LSM implementations to use the
current task. While we are changing the hook declaration we also
rename the function to security_current_getsecid_subj() in an effort
to reinforce that the hook captures the subjective credentials of the
current task and not an arbitrary task on the system.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Of the three LSMs that implement the security_task_getsecid() LSM
hook, all three LSMs provide the task's objective security
credentials. This turns out to be unfortunate as most of the hook's
callers seem to expect the task's subjective credentials, although
a small handful of callers do correctly expect the objective
credentials.
This patch is the first step towards fixing the problem: it splits
the existing security_task_getsecid() hook into two variants, one
for the subjective creds, one for the objective creds.
void security_task_getsecid_subj(struct task_struct *p,
u32 *secid);
void security_task_getsecid_obj(struct task_struct *p,
u32 *secid);
While this patch does fix all of the callers to use the correct
variant, in order to keep this patch focused on the callers and to
ease review, the LSMs continue to use the same implementation for
both hooks. The net effect is that this patch should not change
the behavior of the kernel in any way, it will be up to the latter
LSM specific patches in this series to change the hook
implementations and return the correct credentials.
Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
