cgroup resource allocation has to be handled in TTM, so -EAGAIN from
cgroups can be converted into -ENOSPC, and the limitcg can be properly
evicted in ttm code.
When hitting a resource limit through -EAGAIN, the cgroup for which the
limit is hit is also returned. This allows eviction to delete only from
cgroups which are a subgroup of the current cgroup.
The returned CSS is used to determine if eviction is valuable for a
given resource, and allows TTM to only target specific resources to
lower memory usage.
Co-developed-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Co-developed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204134410.1161769-4-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Driver Changes:
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag)
- Use hw support for min/interim ddb allocation for async flip (Vinod)
- More general code refactor to allow full display separation (Jani)
- Expose dsc sink max slice count via debugfs (Swati)
- Fix C10 pll programming sequence (Suraj)
- Fix DG1 power gate sequence (Rodrigo)
- Use preemption timeout on selftest cleanup (Janusz)
- DP DSC related fixes (Ankit)
- Fix HDCP compliance test (Suraj)
- Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj)
- Adjust Added Wake Time with PKG_C_LATENCY (Animesh)
- Enabling uncompressed 128b/132b UHBR SST (Jani)
- Handle hdmi connector init failures, and no HDMI/DP cases (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z31_WPbBoHkwgEA9@intel.com
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.
There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.
Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.
v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
Core Changes:
- drm/print: add drm_print_hex_dump()
Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc]
Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
Atm when the connector is added to the drm_mode_config::connector_list,
the connector may not be fully initialized yet. This is not a problem
for static connectors initialized/added during driver loading, for which
the driver ensures that look-ups via the above list are not possible
until all the connector and other required state is fully initialized
already. It's also not a problem for user space looking up either a
static or dynamic (see what this is below) connector, since this will be
only possible once the connector is registered.
A dynamic - atm only a DP MST - connector can be initialized and added
after the load time initialization is done. Such a connector may be
looked up by in-kernel users once it's added to the connector list. In
particular a hotplug handler could perform a detection on all the
connectors on the list and hence find a connector there which isn't yet
initialized. For instance the connector's helper hooks may be unset,
leading to a NULL dereference while the detect helper calls the
connector's drm_connector_helper_funcs::detect() or detect_ctx()
handler.
To resolve the above issue, add a way for dynamic connectors to
separately initialize the DRM core specific parts of the connector
without adding it to the connector list - by calling the new
drm_connector_dynamic_init() - and to add the connector to the list
later once all the initialization is complete and the connector is
registered - by calling the new drm_connector_dynamic_register().
Adding the above 2 functions was also motivated to make the distinction
of the interface between static and dynamic connectors clearer: Drivers
should manually initialize and register only dynamic connectors (with
the above 2 functions). A driver should only initialize a static
connector (with one of the drm_connector_init*, drmm_connector_init*
functions) while the registration of the connector will be done
automatically by DRM core.
v2: (Jani)
- Let initing DDC as well via drm_connector_init_core().
- Rename __drm_connector_init to drm_connector_init_core_and_add().
v3:
- Rename drm_connector_init_core() to drm_connector_dynamic_init().
(Sima)
- Instead of exporting drm_connector_add(), move adding the connector
to the registration step via a new drm_connector_dynamic_register().
(Sima)
- Update drm_connector_dynamic_init()'s function documentation and the
commit log according to the above changes.
- Update the commit log describing the problematic scenario during
connector detection. (Maxime)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-2-imre.deak@intel.com
The connector->eld is accessed by the .get_eld() callback. This access
can collide with the drm_edid_to_eld() updating the data at the same
time. Add drm_connector.eld_mutex to protect the data from concurrenct
access. Individual drivers are not updated (to reduce possible issues
while applying the patch), maintainers are to find a best suitable way
to lock that mutex while accessing the ELD data.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-1-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
