Pull input updates from Dmitry Torokhov:
- several new device IDs added to xpad game controller driver
- support for imagis IST3038H variant of chip added to imagis touch
controller driver
- a fix for GPIO allocation for ads7846 touch controller driver
- a fix for iqs7222 driver to properly support status register
- a fix for goodix-berlin touch controller driver to use the right name
for the regulator
- more i8042 quirks to better handle several old Clevo devices.
* tag 'input-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Remove myself from the goodix touchscreen maintainers
Input: iqs7222 - preserve system status register
Input: i8042 - swap old quirk combination with new quirk for more devices
Input: i8042 - swap old quirk combination with new quirk for several devices
Input: i8042 - add required quirks for missing old boardnames
Input: i8042 - swap old quirk combination with new quirk for NHxxRZQ
Input: xpad - rename QH controller to Legion Go S
Input: xpad - add support for TECNO Pocket Go
Input: xpad - add support for ZOTAC Gaming Zone
Input: goodix-berlin - fix vddio regulator references
Input: goodix-berlin - fix comment referencing wrong regulator
Input: imagis - add support for imagis IST3038H
dt-bindings: input/touchscreen: imagis: add compatible for ist3038h
Input: xpad - add multiple supported devices
Input: xpad - add 8BitDo SN30 Pro, Hyperkin X91 and Gamesir G7 SE controllers
Input: ads7846 - fix gpiod allocation
Input: wdt87xx_i2c - fix compiler warning
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently the platform filter cannot access any driver-specific state
which forces drivers installing a i8042 filter to have at least some
kind of global pointer for their filter.
Allow callers of i8042_install_filter() to submit a context pointer
which is then passed to the i8042 filter. This frees drivers from the
responsibility of having to manage this global pointer themself.
Also introduce a separate type for the i8042 filter (i8042_filter_t)
so that the function definitions can stay compact.
Tested on a Dell Inspiron 3505.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250113221314.435812-1-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull input updates from Dmitry Torokhov:
- support for NT36672A touchscreen added to novatek-nvt-ts driver
- a change to ads7846 driver to prevent XPT2046 from locking up
- a change switching platform input dirves back to using remove()
method (from remove_new())
- updates to a number of input drivers to use the new cleanup
facilities (__free(...), guard(), and scoped-guard()) which ensure
that the resources and locks are released properly and automatically
- other assorted driver cleanups and fixes.
* tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits)
Input: mpr121 - use devm_regulator_get_enable_read_voltage()
Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly
Input: spear-keyboard - don't include 'pm_wakeup.h' directly
Input: cypress-sf - constify struct i2c_device_id
Input: ads7846 - increase xfer array size in 'struct ser_req'
Input: fix the input_event struct documentation
Input: i8042 - fix typo dublicate to duplicate
Input: ads7846 - add dummy command register clearing cycle
Input: cs40l50 - fix wrong usage of INIT_WORK()
Input: introduce notion of passive observers for input handlers
Input: maple_keyb - use guard notation when acquiring mutex
Input: locomokbd - use guard notation when acquiring spinlock
Input: hilkbd - use guard notation when acquiring spinlock
Input: synaptics-rmi4 - switch to using cleanup functions in F34
Input: synaptics - fix a typo
dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type
Input: omap-keypad - use guard notation when acquiring mutex
Input: imagis - fix warning regarding 'imagis_3038_data' being unused
Input: userio - remove unneeded semicolon
Input: sparcspkr - use cleanup facility for device_node
...
Recent conversion of the driver to use guard notation for locks and
other resources introduced a bug: "written" variable that is supposed to
hold number of bytes successfully written was not initialized.
Fix it by initializing the variable with 0.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410201730.ItNhUTIv-lkp@intel.com/
Fixes: 5b53a9d40c ("Input: serio_raw - use guard notation for locks and other resources")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/input/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in a few drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241008090009.462836-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When compiling with W=1 the following warnings are triggered:
drivers/input/serio/serio_raw.c: In function ‘serio_raw_connect’:
drivers/input/serio/serio_raw.c:303:28: error: ‘%ld’ directive output may be truncated writing between 1 and 11 bytes into a region of size 7 [-Werror=format-truncation=]
303 | "serio_raw%ld", (long)atomic_inc_return(&serio_raw_no));
atomic_inc_return() returns an int, so there is no reason to cast it
to long and print as such. Fix the issue by removing the cast,
printing it as unsigned decimal, and expanding the name from 16 to 20
bytes to accommodate the largest possible port number.
Link: https://lore.kernel.org/r/20240905041732.2034348-22-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Use guard notation when acquiring mutexes and spinlocks, and when
pausing and resuming serio port. Such guard notation makes the code
more compact and error handling more robust by ensuring that locks
are released in all code paths when control leaves critical section.
Link: https://lore.kernel.org/r/20240905041732.2034348-21-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
