mirror of
https://github.com/Dasharo/linux.git
synced 2026-03-06 15:25:10 -08:00
master
265 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Linus Torvalds
|
0f8e26b38d |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Loongarch:
- Clear LLBCTL if secondary mmu mapping changes
- Add hypercall service support for usermode VMM
x86:
- Add a comment to kvm_mmu_do_page_fault() to explain why KVM
performs a direct call to kvm_tdp_page_fault() when RETPOLINE is
enabled
- Ensure that all SEV code is compiled out when disabled in Kconfig,
even if building with less brilliant compilers
- Remove a redundant TLB flush on AMD processors when guest CR4.PGE
changes
- Use str_enabled_disabled() to replace open coded strings
- Drop kvm_x86_ops.hwapic_irr_update() as KVM updates hardware's
APICv cache prior to every VM-Enter
- Overhaul KVM's CPUID feature infrastructure to track all vCPU
capabilities instead of just those where KVM needs to manage state
and/or explicitly enable the feature in hardware. Along the way,
refactor the code to make it easier to add features, and to make it
more self-documenting how KVM is handling each feature
- Rework KVM's handling of VM-Exits during event vectoring; this
plugs holes where KVM unintentionally puts the vCPU into infinite
loops in some scenarios (e.g. if emulation is triggered by the
exit), and brings parity between VMX and SVM
- Add pending request and interrupt injection information to the
kvm_exit and kvm_entry tracepoints respectively
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU
when loading guest/host PKRU, due to a refactoring of the kernel
helpers that didn't account for KVM's pre-checking of the need to
do WRPKRU
- Make the completion of hypercalls go through the complete_hypercall
function pointer argument, no matter if the hypercall exits to
userspace or not.
Previously, the code assumed that KVM_HC_MAP_GPA_RANGE specifically
went to userspace, and all the others did not; the new code need
not special case KVM_HC_MAP_GPA_RANGE and in fact does not care at
all whether there was an exit to userspace or not
- As part of enabling TDX virtual machines, support support
separation of private/shared EPT into separate roots.
When TDX will be enabled, operations on private pages will need to
go through the privileged TDX Module via SEAMCALLs; as a result,
they are limited and relatively slow compared to reading a PTE.
The patches included in 6.14 allow KVM to keep a mirror of the
private EPT in host memory, and define entries in kvm_x86_ops to
operate on external page tables such as the TDX private EPT
- The recently introduced conversion of the NX-page reclamation
kthread to vhost_task moved the task under the main process. The
task is created as soon as KVM_CREATE_VM was invoked and this, of
course, broke userspace that didn't expect to see any child task of
the VM process until it started creating its own userspace threads.
In particular crosvm refuses to fork() if procfs shows any child
task, so unbreak it by creating the task lazily. This is arguably a
userspace bug, as there can be other kinds of legitimate worker
tasks and they wouldn't impede fork(); but it's not like userspace
has a way to distinguish kernel worker tasks right now. Should they
show as "Kthread: 1" in proc/.../status?
x86 - Intel:
- Fix a bug where KVM updates hardware's APICv cache of the highest
ISR bit while L2 is active, while ultimately results in a
hardware-accelerated L1 EOI effectively being lost
- Honor event priority when emulating Posted Interrupt delivery
during nested VM-Enter by queueing KVM_REQ_EVENT instead of
immediately handling the interrupt
- Rework KVM's processing of the Page-Modification Logging buffer to
reap entries in the same order they were created, i.e. to mark gfns
dirty in the same order that hardware marked the page/PTE dirty
- Misc cleanups
Generic:
- Cleanup and harden kvm_set_memory_region(); add proper lockdep
assertions when setting memory regions and add a dedicated API for
setting KVM-internal memory regions. The API can then explicitly
disallow all flags for KVM-internal memory regions
- Explicitly verify the target vCPU is online in kvm_get_vcpu() to
fix a bug where KVM would return a pointer to a vCPU prior to it
being fully online, and give kvm_for_each_vcpu() similar treatment
to fix a similar flaw
- Wait for a vCPU to come online prior to executing a vCPU ioctl, to
fix a bug where userspace could coerce KVM into handling the ioctl
on a vCPU that isn't yet onlined
- Gracefully handle xarray insertion failures; even though such
failures are impossible in practice after xa_reserve(), reserving
an entry is always followed by xa_store() which does not know (or
differentiate) whether there was an xa_reserve() before or not
RISC-V:
- Zabha, Svvptc, and Ziccrse extension support for guests. None of
them require anything in KVM except for detecting them and marking
them as supported; Zabha adds byte and halfword atomic operations,
while the others are markers for specific operation of the TLB and
of LL/SC instructions respectively
- Virtualize SBI system suspend extension for Guest/VM
- Support firmware counters which can be used by the guests to
collect statistics about traps that occur in the host
Selftests:
- Rework vcpu_get_reg() to return a value instead of using an
out-param, and update all affected arch code accordingly
- Convert the max_guest_memory_test into a more generic
mmu_stress_test. The basic gist of the "conversion" is to have the
test do mprotect() on guest memory while vCPUs are accessing said
memory, e.g. to verify KVM and mmu_notifiers are working as
intended
- Play nice with treewrite builds of unsupported architectures, e.g.
arm (32-bit), as KVM selftests' Makefile doesn't do anything to
ensure the target architecture is actually one KVM selftests
supports
- Use the kernel's $(ARCH) definition instead of the target triple
for arch specific directories, e.g. arm64 instead of aarch64,
mainly so as not to be different from the rest of the kernel
- Ensure that format strings for logging statements are checked by
the compiler even when the logging statement itself is disabled
- Attempt to whack the last LLC references/misses mole in the Intel
PMU counters test by adding a data load and doing CLFLUSH{OPT} on
the data instead of the code being executed. It seems that modern
Intel CPUs have learned new code prefetching tricks that bypass the
PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that
events are counting correctly without actually knowing what the
events count given the underlying hardware; this can happen if
Intel reuses a formerly microarchitecture-specific event encoding
as an architectural event, as was the case for Top-Down Slots"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (151 commits)
kvm: defer huge page recovery vhost task to later
KVM: x86/mmu: Return RET_PF* instead of 1 in kvm_mmu_page_fault()
KVM: Disallow all flags for KVM-internal memslots
KVM: x86: Drop double-underscores from __kvm_set_memory_region()
KVM: Add a dedicated API for setting KVM-internal memslots
KVM: Assert slots_lock is held when setting memory regions
KVM: Open code kvm_set_memory_region() into its sole caller (ioctl() API)
LoongArch: KVM: Add hypercall service support for usermode VMM
LoongArch: KVM: Clear LLBCTL if secondary mmu mapping is changed
KVM: SVM: Use str_enabled_disabled() helper in svm_hardware_setup()
KVM: VMX: read the PML log in the same order as it was written
KVM: VMX: refactor PML terminology
KVM: VMX: Fix comment of handle_vmx_instruction()
KVM: VMX: Reinstate __exit attribute for vmx_exit()
KVM: SVM: Use str_enabled_disabled() helper in sev_hardware_setup()
KVM: x86: Avoid double RDPKRU when loading host/guest PKRU
KVM: x86: Use LVT_TIMER instead of an open coded literal
RISC-V: KVM: Add new exit statstics for redirected traps
RISC-V: KVM: Update firmware counters for various events
RISC-V: KVM: Redirect instruction access fault trap to guest
...
|
||
 Mark Brown
|
819935464c |
arm64/hwcap: Describe 2024 dpISA extensions to userspace
The 2024 dpISA introduces a number of architecture features all of which only add new instructions so only require the addition of hwcaps and ID register visibility. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250107-arm64-2024-dpisa-v5-3-7578da51fc3d@kernel.org Signed-off-by: Will Deacon <will@kernel.org> |
||
 Sean Christopherson
|
915d2f0718 |
KVM: Move KVM_REG_SIZE() definition to common uAPI header
Define KVM_REG_SIZE() in the common kvm.h header, and delete the arm64 and RISC-V versions. As evidenced by the surrounding definitions, all aspects of the register size encoding are generic, i.e. RISC-V should have moved arm64's definition to common code instead of copy+pasting. Acked-by: Anup Patel <anup@brainfault.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20241128005547.4077116-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Linus Torvalds
|
9f16d5e6f2 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
||
 Catalin Marinas
|
5a4332062e |
Merge branches 'for-next/gcs', 'for-next/probes', 'for-next/asm-offsets', 'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
||
 David Woodhouse
|
97413cea1c |
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function which is analogous to ACPI S4 state. This will allow hosting environments to determine that a guest is hibernated rather than just powered off, and ensure that they preserve the virtual environment appropriately to allow the guest to resume safely (or bump the hardware_signature in the FACS to trigger a clean reboot instead). This feature is safe to enable unconditionally (in a subsequent commit) because it is exposed to userspace through the existing KVM_SYSTEM_EVENT_SHUTDOWN event, just with an additional flag which userspace can use to know that the instance intended hibernation instead of a plain power-off. As with SYSTEM_RESET2, there is only one type available (in this case HIBERNATE_OFF), and it is not explicitly reported to userspace through the event; userspace can get it from the registers if it cares). Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Miguel Luis <miguel.luis@oracle.com> Link: https://lore.kernel.org/r/20241019172459.2241939-3-dwmw2@infradead.org [oliver: slight cleanup of comments] Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Mark Brown
|
ddadbcdaae |
arm64: Support AT_HWCAP3
We have filled all 64 bits of AT_HWCAP2 so in order to support discovery of further features provide the framework to use the already defined AT_HWCAP3 for further CPU features. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20241004-arm64-elf-hwcap3-v2-2-799d1daad8b0@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
7ec3b57cb2 |
arm64/ptrace: Expose GCS via ptrace and core files
Provide a new register type NT_ARM_GCS reporting the current GCS mode and pointer for EL0. Due to the interactions with allocation and deallocation of Guarded Control Stacks we do not permit any changes to the GCS mode via ptrace, only GCSPR_EL0 may be changed. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-27-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
16f47bb9ac |
arm64/signal: Expose GCS state in signal frames
Add a context for the GCS state and include it in the signal context when running on a system that supports GCS. We reuse the same flags that the prctl() uses to specify which GCS features are enabled and also provide the current GCS pointer. We do not support enabling GCS via signal return, there is a conflict between specifying GCSPR_EL0 and allocation of a new GCS and this is not an ancticipated use case. We also enforce GCS configuration locking on signal return. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> Acked-by: Yury Khrustalev <yury.khrustalev@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-26-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
eefc98711f |
arm64/hwcap: Add hwcap for GCS
Provide a hwcap to enable userspace to detect support for GCS. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Yury Khrustalev <yury.khrustalev@arm.com> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-18-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
 Will Deacon
|
982a847c71 |
Merge branch 'for-next/poe' into for-next/core
* for-next/poe: (31 commits) arm64: pkeys: remove redundant WARN kselftest/arm64: Add test case for POR_EL0 signal frame records kselftest/arm64: parse POE_MAGIC in a signal frame kselftest/arm64: add HWCAP test for FEAT_S1POE selftests: mm: make protection_keys test work on arm64 selftests: mm: move fpregs printing kselftest/arm64: move get_header() arm64: add Permission Overlay Extension Kconfig arm64: enable PKEY support for CPUs with S1POE arm64: enable POE and PIE to coexist arm64/ptrace: add support for FEAT_POE arm64: add POE signal support arm64: implement PKEYS support arm64: add pte_access_permitted_no_overlay() arm64: handle PKEY/POE faults arm64: mask out POIndex when modifying a PTE arm64: convert protection key into vm_flags and pgprot values arm64: add POIndex defines arm64: re-order MTE VM_ flags arm64: enable the Permission Overlay Extension for EL0 ... |
||
 Joey Gouly
|
9160f7e909 |
arm64: add POE signal support
Add PKEY support to signals, by saving and restoring POR_EL0 from the stackframe. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20240822151113.1479789-20-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Joey Gouly
|
7f955be9f8 |
arm64: implement PKEYS support
Implement the PKEYS interface, using the Permission Overlay Extension. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20240822151113.1479789-19-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
|
Joey Gouly
|
bf83dae90f |
arm64: enable the Permission Overlay Extension for EL0
Expose a HWCAP and ID_AA64MMFR3_EL1_S1POE to userspace, so they can be used to check if the CPU supports the feature. Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20240822151113.1479789-12-joey.gouly@arm.com Signed-off-by: Will Deacon <will@kernel.org> |
||
 Dave Martin
|
fc2220c9b1 |
arm64: signal: Fix some under-bracketed UAPI macros
A few SME-related sigcontext UAPI macros leave an argument unprotected from misparsing during macro expansion. Add parentheses around references to macro arguments where appropriate. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Fixes: |
||
 Arnd Bergmann
|
e632bca07c |
arm64: generate 64-bit syscall.tbl
Change the asm/unistd.h header for arm64 to no longer include asm-generic/unistd.h itself, but instead generate both the asm/unistd.h contents and the list of entry points using the syscall.tbl scripts that we use on most other architectures. Once his is done for the remaining architectures, the generic unistd.h header can be removed and the generated tbl file put in its place. The Makefile changes are more complex than they should be, I need a little help to improve those. Ideally this should be done in an architecture-independent way as well. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
505d66d1ab |
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
When clone3() was introduced, it was not obvious how each architecture deals with setting up the stack and keeping the register contents in a fork()-like system call, so this was left for the architecture maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those that already implement it. Five years later, we still have a few architectures left that are missing clone3(), and the macro keeps getting in the way as it's fundamentally different from all the other __ARCH_WANT_SYS_* macros that are meant to provide backwards-compatibility with applications using older syscalls that are no longer provided by default. Address this by reversing the polarity of the macro, adding an __ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3 from all the other ones. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
4f712ee0cb |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
||
|
Catalin Marinas
|
0c5ade742e |
Merge branches 'for-next/reorg-va-space', 'for-next/rust-for-arm64', 'for-next/misc', 'for-next/daif-cleanup', 'for-next/kselftest', 'for-next/documentation', 'for-next/sysreg' and 'for-next/dpisa', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (39 commits)
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
drivers/perf: hisi_pcie: Merge find_related_event() and get_event_idx()
drivers/perf: hisi_pcie: Relax the check on related events
drivers/perf: hisi_pcie: Check the target filter properly
drivers/perf: hisi_pcie: Add more events for counting TLP bandwidth
drivers/perf: hisi_pcie: Fix incorrect counting under metric mode
drivers/perf: hisi_pcie: Introduce hisi_pcie_pmu_get_event_ctrl_val()
drivers/perf: hisi_pcie: Rename hisi_pcie_pmu_{config,clear}_filter()
drivers/perf: hisi: Enable HiSilicon Erratum 162700402 quirk for HIP09
perf/arm_cspmu: Add devicetree support
dt-bindings/perf: Add Arm CoreSight PMU
perf/arm_cspmu: Simplify counter reset
perf/arm_cspmu: Simplify attribute groups
perf/arm_cspmu: Simplify initialisation
...
* for-next/reorg-va-space:
: Reorganise the arm64 kernel VA space in preparation for LPA2 support
: (52-bit VA/PA).
arm64: kaslr: Adjust randomization range dynamically
arm64: mm: Reclaim unused vmemmap region for vmalloc use
arm64: vmemmap: Avoid base2 order of struct page size to dimension region
arm64: ptdump: Discover start of vmemmap region at runtime
arm64: ptdump: Allow all region boundaries to be defined at boot time
arm64: mm: Move fixmap region above vmemmap region
arm64: mm: Move PCI I/O emulation region above the vmemmap region
* for-next/rust-for-arm64:
: Enable Rust support for arm64
arm64: rust: Enable Rust support for AArch64
rust: Refactor the build target to allow the use of builtin targets
* for-next/misc:
: Miscellaneous arm64 patches
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
arm64: Remove enable_daif macro
arm64/hw_breakpoint: Directly use ESR_ELx_WNR for an watchpoint exception
arm64: cpufeatures: Clean up temporary variable to simplify code
arm64: Update setup_arch() comment on interrupt masking
arm64: remove unnecessary ifdefs around is_compat_task()
arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang
arm64/sme: Ensure that all fields in SMCR_EL1 are set to known values
arm64/sve: Ensure that all fields in ZCR_EL1 are set to known values
arm64/sve: Document that __SVE_VQ_MAX is much larger than needed
arm64: make member of struct pt_regs and it's offset macro in the same order
arm64: remove unneeded BUILD_BUG_ON assertion
arm64: kretprobes: acquire the regs via a BRK exception
arm64: io: permit offset addressing
arm64: errata: Don't enable workarounds for "rare" errata by default
* for-next/daif-cleanup:
: Clean up DAIF handling for EL0 returns
arm64: Unmask Debug + SError in do_notify_resume()
arm64: Move do_notify_resume() to entry-common.c
arm64: Simplify do_notify_resume() DAIF masking
* for-next/kselftest:
: Miscellaneous arm64 kselftest patches
kselftest/arm64: Test that ptrace takes effect in the target process
* for-next/documentation:
: arm64 documentation patches
arm64/sme: Remove spurious 'is' in SME documentation
arm64/fp: Clarify effect of setting an unsupported system VL
arm64/sme: Fix cut'n'paste in ABI document
arm64/sve: Remove bitrotted comment about syscall behaviour
* for-next/sysreg:
: sysreg updates
arm64/sysreg: Update ID_AA64DFR0_EL1 register
arm64/sysreg: Update ID_DFR0_EL1 register fields
arm64/sysreg: Add register fields for ID_AA64DFR1_EL1
* for-next/dpisa:
: Support for 2023 dpISA extensions
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
|
||
|
Mark Brown
|
c1932cac79 |
arm64/hwcap: Define hwcaps for 2023 DPISA features
The 2023 architecture extensions include a large number of floating point features, most of which simply add new instructions. Add hwcaps so that userspace can enumerate these features. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-6-c568edc8ed7f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
8c46def444 |
arm64/signal: Add FPMR signal handling
Expose FPMR in the signal context on systems where it is supported. The kernel validates the exact size of the FPSIMD registers so we can't readily add it to fpsimd_context without disruption. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-4-c568edc8ed7f@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Mark Brown
|
21eb468e9f |
arm64/sve: Document that __SVE_VQ_MAX is much larger than needed
__SVE_VQ_MAX is defined without comment as 512 but the actual architectural maximum is 16, a substantial difference which might not be obvious to readers especially given the several different units used for specifying vector sizes in various contexts and the fact that it's often used via macros. In an effort to minimise surprises for users who might assume the value is the architectural maximum and use it to do things like size allocations add a comment noting the difference, and add a note for SVE_VQ_MAX to aid discoverability. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Dave Martin <Dave.Martin@arm.com> Link: https://lore.kernel.org/r/20240209-arm64-sve-vl-max-comment-v2-1-111b283469ee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
 Paolo Bonzini
|
6bda055d62 |
KVM: define __KVM_HAVE_GUEST_DEBUG unconditionally
Since all architectures (for historical reasons) have to define struct kvm_guest_debug_arch, and since userspace has to check KVM_CHECK_EXTENSION(KVM_CAP_SET_GUEST_DEBUG) anyway, there is no advantage in masking the capability #define itself. Remove the #define __KVM_HAVE_GUEST_DEBUG from architecture-specific headers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
8886640dad |
kvm: replace __KVM_HAVE_READONLY_MEM with Kconfig symbol
KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly return nonzero. This however does not make sense, and it prevented userspace from supporting this architecture-independent feature without recompilation. Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and is only used in virt/kvm/kvm_main.c. Userspace does not need to test it and there should be no need for it to exist. Remove it and replace it with a Kconfig symbol within Linux source code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Paolo Bonzini
|
5d9cb71642 |
KVM: arm64: move ARM-specific defines to uapi/asm/kvm.h
While this in principle breaks userspace code that mentions KVM_ARM_DEV_* on architectures other than aarch64, this seems unlikely to be a problem considering that run->s.regs.device_irq_level is only defined on that architecture. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |