Function graph uses a subops and manager ops mechanism to attach to
ftrace. The manager ops connects to ftrace and the functions it connects
to is defined by a list of subops that it manages.
The function hash that defines what the above ops attaches to limits the
functions to attach if the hash has any content. If the hash is empty, it
means to trace all functions.
The creation of the manager ops hash is done by iterating over all the
subops hashes. If any of the subops hashes is empty, it means that the
manager ops hash must trace all functions as well.
The issue is in the creation of the manager ops. When a second subops is
attached, a new hash is created by starting it as NULL and adding the
subops one at a time. But the NULL ops is mistaken as an empty hash, and
once an empty hash is found, it stops the loop of subops and just enables
all functions.
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
trace_initcall_start_cb (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
try_to_run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
cleanup_rapl_pmus (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_free_pcibus_map (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_types_exit (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
kvm_shutdown (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_dump_msrs (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_cleanup_l1d_flush (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
[..]
Fix this by initializing the new hash to NULL and if the hash is NULL do
not treat it as an empty hash but instead allocate by copying the content
of the first sub ops. Then on subsequent iterations, the new hash will not
be NULL, but the content of the previous subops. If that first subops
attached to all functions, then new hash may assume that the manager ops
also needs to attach to all functions.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.060300046@goodmis.org
Fixes: 5fccc7552c ("ftrace: Add subops logic to allow one ops to manage many")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25c ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
Pull ftrace updates from Steven Rostedt:
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function.
The fprobe and kretprobe logic implements a similar method as the
function graph tracer to trace the end of the function. That is to
hijack the return address and jump to a trampoline to do the trace
when the function exits. To do this, a shadow stack needs to be
created to store the original return address. Fprobes and function
graph do this slightly differently. Fprobes (and kretprobes) has
slots per callsite that are reserved to save the return address. This
is fine when just a few points are traced. But users of fprobes, such
as BPF programs, are starting to add many more locations, and this
method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started,
every task gets its own shadow stack to hold the return address that
is going to be traced. The function graph tracer has been updated to
allow multiple users to use its infrastructure. Now have fprobes be
one of those users. This will also allow for the fprobe and kretprobe
methods to trace the return address to become obsolete. With new
technologies like CFI that need to know about these methods of
hijacking the return address, going toward a solution that has only
one method of doing this will make the kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable
interrupts and not trace NMIs. But the code has changed to allow NMIs
and also interrupts. This change was done a long time ago, but the
disabling of interrupts was never removed. Remove the disabling of
interrupts in the function graph tracer is it is not needed. This
greatly improves its performance.
- Allow the :mod: command to enable tracing module functions on the
kernel command line.
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
* tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ftrace: Implement :mod: cache filtering on kernel command line
tracing: Adopt __free() and guard() for trace_fprobe.c
bpf: Use ftrace_get_symaddr() for kprobe_multi probes
ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr
Documentation: probes: Update fprobe on function-graph tracer
selftests/ftrace: Add a test case for repeating register/unregister fprobe
selftests: ftrace: Remove obsolate maxactive syntax check
tracing/fprobe: Remove nr_maxactive from fprobe
fprobe: Add fprobe_header encoding feature
fprobe: Rewrite fprobe on function-graph tracer
s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
tracing: Add ftrace_fill_perf_regs() for perf event
tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
fprobe: Use ftrace_regs in fprobe exit handler
fprobe: Use ftrace_regs in fprobe entry handler
fgraph: Pass ftrace_regs to retfunc
fgraph: Replace fgraph_ret_regs with ftrace_regs
...
Module functions can be set to set_ftrace_filter before the module is
loaded.
# echo :mod:snd_hda_intel > set_ftrace_filter
This will enable all the functions for the module snd_hda_intel. If that
module is not loaded, it is "cached" in the trace array for when the
module is loaded, its functions will be traced.
But this is not implemented in the kernel command line. That's because the
kernel command line filtering is added very early in boot up as it is
needed to be done before boot time function tracing can start, which is
also available very early in boot up. The code used by the
"set_ftrace_filter" file can not be used that early as it depends on some
other initialization to occur first. But some of the functions can.
Implement the ":mod:" feature of "set_ftrace_filter" in the kernel command
line parsing. Now function tracing on just a single module that is loaded
at boot up can be done.
Adding:
ftrace=function ftrace_filter=:mod:sna_hda_intel
To the kernel command line will only enable the sna_hda_intel module
functions when the module is loaded, and it will start tracing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250116175832.34e39779@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the :mod: command is written into /sys/kernel/tracing/set_event (or
that file within an instance), if the module specified after the ":mod:"
is not yet loaded, it will store that string internally. When the module
is loaded, it will enable the events as if the module was loaded when the
string was written into the set_event file.
This can also be useful to enable events that are in the init section of
the module, as the events are enabled before the init section is executed.
This also works on the kernel command line:
trace_event=:mod:<module>
Will enable the events for <module> when it is loaded.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250116143533.514730995@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit c132be2c4f ("function_graph: Have the instances use their own
ftrace_ops for filtering"), function profiler (enabled via
function_profile_enabled) has been showing statistics for all functions,
ignoring set_ftrace_filter settings.
While tracers are instantiated, the function profiler is not. Therefore, it
should use the global set_ftrace_filter for consistency. This patch
modifies the function profiler to use the global filter, fixing the
filtering functionality.
Before (filtering not working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
Function Hit Time Avg
s^2
-------- --- ---- ---
---
schedule 314 22290594 us 70989.15 us
40372231 us
x64_sys_call 1527 8762510 us 5738.382 us
3414354 us
schedule_hrtimeout_range 176 8665356 us 49234.98 us
405618876 us
__x64_sys_ppoll 324 5656635 us 17458.75 us
19203976 us
do_sys_poll 324 5653747 us 17449.83 us
19214945 us
schedule_timeout 67 5531396 us 82558.15 us
2136740827 us
__x64_sys_pselect6 12 3029540 us 252461.7 us
63296940171 us
do_pselect.constprop.0 12 3029532 us 252461.0 us
63296952931 us
```
After (filtering working):
```
root@localhost:~# echo 'vfs*' > /sys/kernel/tracing/set_ftrace_filter
root@localhost:~# echo 1 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# sleep 1
root@localhost:~# echo 0 > /sys/kernel/tracing/function_profile_enabled
root@localhost:~# head /sys/kernel/tracing/trace_stat/*
Function Hit Time Avg
s^2
-------- --- ---- ---
---
vfs_write 462 68476.43 us 148.217 us
25874.48 us
vfs_read 641 9611.356 us 14.994 us
28868.07 us
vfs_fstat 890 878.094 us 0.986 us
1.667 us
vfs_fstatat 227 757.176 us 3.335 us
18.928 us
vfs_statx 226 610.610 us 2.701 us
17.749 us
vfs_getattr_nosec 1187 460.919 us 0.388 us
0.326 us
vfs_statx_path 297 343.287 us 1.155 us
11.116 us
vfs_rename 6 291.575 us 48.595 us
9889.236 us
```
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250101190820.72534-1-enjuk@amazon.com
Fixes: c132be2c4f ("function_graph: Have the instances use their own ftrace_ops for filtering")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There are a few functions in ftrace.c that have "goto out" or equivalent
on error in order to release locks that were taken. This can be error
prone or just simply make the code more complex.
Switch every location that ends with unlocking a mutex on error over to
using the guard(mutex)() infrastructure to let the compiler worry about
releasing locks. This makes the code easier to read and understand.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20241223184941.718001540@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull tracing updates from Steven Rostedt:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit.
This location is known to allow page faults. The tracepoints are
called under an rcu_read_lock() which does not allow faults that can
sleep. This limits the ability of tracepoint handlers to page fault
in user space system call parameters. Now these tracepoints have been
made "faultable", allowing the callbacks to fault in user space
parameters and record them.
Note, only the infrastructure has been implemented. The consumers
(perf, ftrace, BPF) now need to have their code modified to allow
faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with
atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph
tracer is also running.
When function_graph trace is running along with function tracer, the
parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack
function filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
* tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
ftrace: Fix regression with module command in stack_trace_filter
tracing: Fix function name for trampoline
ftrace: Get the true parent ip for function tracer
tracing: Remove redundant check on field->field in histograms
bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links
bpf: decouple BPF link/attach hook and BPF program sleepable semantics
bpf: put bpf_link's program when link is safe to be deallocated
tracing: Replace strncpy() with strscpy() when copying comm
tracing: Add might_fault() check in __DECLARE_TRACE_SYSCALL
tracing: Fix syscall tracepoint use-after-free
tracing: Introduce tracepoint_is_faultable()
tracing: Introduce tracepoint extended structure
tracing: Remove TRACE_FLAG_IRQS_NOSUPPORT
tracing: Replace multiple deprecated strncpy with memcpy
tracing: Make percpu stack trace buffer invariant to PAGE_SIZE
tracing: Use atomic64_inc_return() in trace_clock_counter()
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
tracing/bpf: Add might_fault check to syscall probes
tracing/perf: Add might_fault check to syscall probes
tracing/ftrace: Add might_fault check to syscall probes
...
Since the beginning of ftrace, the code that did the patching had its
timings saved on how long it took to complete. But this information was
never exposed. It was used for debugging and exposing it was always
something that was on the TODO list. Now it's time to expose it. There's
even a file that is where it should go!
Also include how long patching modules took as a separate value.
# cat /sys/kernel/tracing/dyn_ftrace_total_info
57680 pages:231 groups: 9
ftrace boot update time = 14024666 (ns)
ftrace module total update time = 126070 (ns)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/20241017113105.1edfa943@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When using function_graph tracer to analyze the flow of kernel function
execution, it is often necessary to quickly locate the exact line of code
where the call occurs. While this may be easy at times, it can be more
time-consuming when some functions are inlined or the flow is too long.
This feature aims to simplify the process by recording the return address
of traced funcions and printing it when outputing trace logs.
To enhance human readability, the prefix 'ret=' is used for the kernel return
value, while '<-' serves as the prefix for the return address in trace logs to
make it look more like the function tracer.
A new trace option named 'funcgraph-retaddr' has been introduced, and the
existing option 'sym-addr' can be used to control the format of the return
address.
See below logs with both funcgraph-retval and funcgraph-retaddr enabled.
0) | load_elf_binary() { /* <-bprm_execve+0x249/0x600 */
0) | load_elf_phdrs() { /* <-load_elf_binary+0x84/0x1730 */
0) | __kmalloc_noprof() { /* <-load_elf_phdrs+0x4a/0xb0 */
0) 3.657 us | __cond_resched(); /* <-__kmalloc_noprof+0x28c/0x390 ret=0x0 */
0) + 24.335 us | } /* __kmalloc_noprof ret=0xffff8882007f3000 */
0) | kernel_read() { /* <-load_elf_phdrs+0x6c/0xb0 */
0) | rw_verify_area() { /* <-kernel_read+0x2b/0x50 */
0) | security_file_permission() { /* <-kernel_read+0x2b/0x50 */
0) | selinux_file_permission() { /* <-security_file_permission+0x26/0x40 */
0) | __inode_security_revalidate() { /* <-selinux_file_permission+0x6d/0x140 */
0) 2.034 us | __cond_resched(); /* <-__inode_security_revalidate+0x5f/0x80 ret=0x0 */
0) 6.602 us | } /* __inode_security_revalidate ret=0x0 */
0) 2.214 us | avc_policy_seqno(); /* <-selinux_file_permission+0x107/0x140 ret=0x0 */
0) + 16.670 us | } /* selinux_file_permission ret=0x0 */
0) + 20.809 us | } /* security_file_permission ret=0x0 */
0) + 25.217 us | } /* rw_verify_area ret=0x0 */
0) | __kernel_read() { /* <-load_elf_phdrs+0x6c/0xb0 */
0) | ext4_file_read_iter() { /* <-__kernel_read+0x160/0x2e0 */
Then, we can use the faddr2line to locate the source code, for example:
$ ./scripts/faddr2line ./vmlinux load_elf_phdrs+0x6c/0xb0
load_elf_phdrs+0x6c/0xb0:
elf_read at fs/binfmt_elf.c:471
(inlined by) load_elf_phdrs at fs/binfmt_elf.c:531
Link: https://lore.kernel.org/20240915032912.1118397-1-dolinux.peng@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409150605.HgUmU8ea-lkp@intel.com/
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
[ Rebased to handle text_delta offsets ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The calltime field in the shadow stack frame is only used by the function
graph tracer and profiler. But now that there's other users of the function
graph infrastructure, this adds overhead and wastes space on the shadow
stack. Move the calltime to the fgraph data storage, where the function
graph and profiler entry functions will save it in its own graph storage and
retrieve it in its exit functions.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/20240914214827.096968730@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
