Pull ftrace updates from Steven Rostedt:
- Have fprobes built on top of function graph infrastructure
The fprobe logic is an optimized kprobe that uses ftrace to attach to
functions when a probe is needed at the start or end of the function.
The fprobe and kretprobe logic implements a similar method as the
function graph tracer to trace the end of the function. That is to
hijack the return address and jump to a trampoline to do the trace
when the function exits. To do this, a shadow stack needs to be
created to store the original return address. Fprobes and function
graph do this slightly differently. Fprobes (and kretprobes) has
slots per callsite that are reserved to save the return address. This
is fine when just a few points are traced. But users of fprobes, such
as BPF programs, are starting to add many more locations, and this
method does not scale.
The function graph tracer was created to trace all functions in the
kernel. In order to do this, when function graph tracing is started,
every task gets its own shadow stack to hold the return address that
is going to be traced. The function graph tracer has been updated to
allow multiple users to use its infrastructure. Now have fprobes be
one of those users. This will also allow for the fprobe and kretprobe
methods to trace the return address to become obsolete. With new
technologies like CFI that need to know about these methods of
hijacking the return address, going toward a solution that has only
one method of doing this will make the kernel less complex.
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Remove disabling of interrupts in the function graph tracer
When function graph tracer was first introduced, it could race with
interrupts and NMIs. To prevent that race, it would disable
interrupts and not trace NMIs. But the code has changed to allow NMIs
and also interrupts. This change was done a long time ago, but the
disabling of interrupts was never removed. Remove the disabling of
interrupts in the function graph tracer is it is not needed. This
greatly improves its performance.
- Allow the :mod: command to enable tracing module functions on the
kernel command line.
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Because enabling function tracing can be done very early at boot up
(before scheduling is enabled), the commands that can be done when
function tracing is started is limited. Having the ":mod:" command to
trace module functions as they are loaded is very useful. Update the
kernel command line function filtering to allow it.
* tag 'ftrace-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
ftrace: Implement :mod: cache filtering on kernel command line
tracing: Adopt __free() and guard() for trace_fprobe.c
bpf: Use ftrace_get_symaddr() for kprobe_multi probes
ftrace: Add ftrace_get_symaddr to convert fentry_ip to symaddr
Documentation: probes: Update fprobe on function-graph tracer
selftests/ftrace: Add a test case for repeating register/unregister fprobe
selftests: ftrace: Remove obsolate maxactive syntax check
tracing/fprobe: Remove nr_maxactive from fprobe
fprobe: Add fprobe_header encoding feature
fprobe: Rewrite fprobe on function-graph tracer
s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC
ftrace: Add CONFIG_HAVE_FTRACE_GRAPH_FUNC
bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
tracing: Add ftrace_fill_perf_regs() for perf event
tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
fprobe: Use ftrace_regs in fprobe exit handler
fprobe: Use ftrace_regs in fprobe entry handler
fgraph: Pass ftrace_regs to retfunc
fgraph: Replace fgraph_ret_regs with ftrace_regs
...
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
When kprobe multi bpf program can't be executed due to recursion check,
we currently return 0 (success) to fprobe layer where it's ignored for
standard kprobe multi probes.
For kprobe session the success return value will make fprobe layer to
install return probe and try to execute it as well.
But the return session probe should not get executed, because the entry
part did not run. FWIW the return probe bpf program most likely won't get
executed, because its recursion check will likely fail as well, but we
don't need to run it in the first place.. also we can make this clear
and obvious.
It also affects missed counts for kprobe session program execution, which
are now doubled (extra count for not executed return probe).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250106175048.1443905-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit ef1b808e3b ("bpf: Fix UAF via mismatching bpf_prog/attachment
RCU flavors") resolved a possible UAF issue in uprobes that attach
non-sleepable bpf prog by explicitly waiting for a tasks-trace-RCU grace
period. But, in the current implementation, synchronize_rcu_tasks_trace
is included within the mutex critical section, which increases the
length of the critical section and may affect performance. So let's move
out synchronize_rcu_tasks_trace from mutex CS.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250104013946.1111785-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Syzbot reported [1] crash that happens for following tracing scenario:
- create tracepoint perf event with attr.inherit=1, attach it to the
process and set bpf program to it
- attached process forks -> chid creates inherited event
the new child event shares the parent's bpf program and tp_event
(hence prog_array) which is global for tracepoint
- exit both process and its child -> release both events
- first perf_event_detach_bpf_prog call will release tp_event->prog_array
and second perf_event_detach_bpf_prog will crash, because
tp_event->prog_array is NULL
The fix makes sure the perf_event_detach_bpf_prog checks prog_array
is valid before it tries to remove the bpf program from it.
[1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad
Fixes: 0ee288e69d ("bpf,perf: Fix perf_event_detach_bpf_prog error handling")
Reported-by: syzbot+2e0d2840414ce817aaac@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241208142507.1207698-1-jolsa@kernel.org
Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU
protection. But it is possible to attach a non-sleepable BPF program to a
uprobe, and non-sleepable BPF programs are freed via normal RCU (see
__bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal
RCU grace period does not imply a tasks-trace-RCU grace period.
Fix it by explicitly waiting for a tasks-trace-RCU grace period after
removing the attachment of a bpf_prog to a perf_event.
Fixes: 8c7dcb84e3 ("bpf: implement sleepable uprobes by chaining gps")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20241210-bpf-fix-actual-uprobe-uaf-v1-1-19439849dd44@google.com
With bpf_get_probe_write_proto() no longer printing a message, we can
avoid it being a special case with its own permission check.
Refactor bpf_tracing_func_proto() similar to bpf_base_func_proto() to
have a section conditional on bpf_token_capable(CAP_SYS_ADMIN), where
the proto for bpf_probe_write_user() is returned. Finally, remove the
unnecessary bpf_get_probe_write_proto().
This simplifies the code, and adding additional CAP_SYS_ADMIN-only
helpers in future avoids duplicating the same CAP_SYS_ADMIN check.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20241129090040.2690691-2-elver@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, space for raw sample data is always allocated within sample
records for both BPF output and tracepoint events. This leads to unused
space in sample records when raw sample data is not requested.
This patch enforces checking sample type of an event in
perf_sample_save_raw_data(). So raw sample data will only be saved if
explicitly requested, reducing overhead when it is not needed.
Fixes: 0a9081cf0a ("perf/core: Add perf_sample_save_raw_data() helper")
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-2-yabinc@google.com
Adding support to attach BPF program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two uprobe multi links.
Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the BPF program on return
probe simply by returning zero or non zero from the entry BPF
program execution to execute or not the BPF program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org
Add a MEM_WRITE attribute for BPF helper functions which can be used in
bpf_func_proto to annotate an argument type in order to let the verifier
know that the helper writes into the memory passed as an argument. In
the past MEM_UNINIT has been (ab)used for this function, but the latter
merely tells the verifier that the passed memory can be uninitialized.
There have been bugs with overloading the latter but aside from that
there are also cases where the passed memory is read + written which
currently cannot be expressed, see also 4b3786a6c5 ("bpf: Zero former
ARG_PTR_TO_{LONG,INT} args in case of error").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241021152809.33343-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
