Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
Pull bitmap updates from Yury Norov:
"This includes const_true() series from Vincent Mailhol, another
__always_inline rework from Nathan Chancellor for RISCV, and a couple
of random fixes from Dr. David Alan Gilbert and I Hsin Cheng"
* tag 'bitmap-for-6.14' of https://github.com:/norov/linux:
cpumask: Rephrase comments for cpumask_any*() APIs
cpu: Remove unused init_cpu_online
riscv: Always inline bitops
linux/bits.h: simplify GENMASK_INPUT_CHECK()
compiler.h: add const_true()
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com
CPU unplug first calls __cpu_disable(), and that's where powerpc calls
cleanup_cpu_mmu_context(), which clears this CPU from mm_cpumask() of all
mms in the system.
However this CPU may still be using a lazy tlb mm, and its mm_cpumask bit
will be cleared from it. The CPU does not switch away from the lazy tlb
mm until arch_cpu_idle_dead() calls idle_task_exit().
If that user mm exits in this window, it will not be subject to the lazy
tlb mm shootdown and may be freed while in use as a lazy mm by the CPU
that is being unplugged.
cleanup_cpu_mmu_context() could be moved later, but it looks better to
move the lazy tlb mm switching earlier. The problem with doing the lazy
mm switching in idle_task_exit() is explained in commit bf2c59fce4
("sched/core: Fix illegal RCU from offline CPUs"), which added a wart to
switch away from the mm but leave it set in active_mm to be cleaned up
later.
So instead, switch away from the lazy tlb mm at sched_cpu_wait_empty(),
which is the last hotplug state before teardown
(CPUHP_AP_SCHED_WAIT_EMPTY). This CPU will never switch to a user thread
from this point, so it has no chance to pick up a new lazy tlb mm. This
removes the lazy tlb mm handling wart in CPU unplug.
With this, idle_task_exit() is not needed anymore and can be cleaned up.
This leaves the prototype alone, to be cleaned after this change.
herton: took the suggestions from https://lore.kernel.org/all/87jzvyprsw.ffs@tglx/
and made adjustments on the initial patch proposed by Nicholas.
Link: https://lkml.kernel.org/r/20230524060455.147699-1-npiggin@gmail.com
Link: https://lore.kernel.org/all/20230525205253.E2FAEC433EF@smtp.kernel.org/
Link: https://lkml.kernel.org/r/20241104142318.3295663-1-herton@redhat.com
Fixes: 2655421ae6 ("lazy tlb: shoot lazies, non-refcounting lazy tlb mm reference handling scheme")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The last use of init_cpu_online() was removed by the
commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
The way the clockevent devices are finally stopped while a CPU is
offlining is currently chaotic. The layout being by order:
1) tick_sched_timer_dying() stops the tick and the underlying clockevent
but only for oneshot case. The periodic tick and its related
clockevent still runs.
2) tick_broadcast_offline() detaches and stops the per-cpu oneshot
broadcast and append it to the released list.
3) Some individual clockevent drivers stop the clockevents (a second time if
the tick is oneshot)
4) Once the CPU is dead, a control CPU remotely detaches and stops
(a 3rd time if oneshot mode) the CPU clockevent and adds it to the
released list.
5) The released list containing the broadcast device released on step 2)
and the remotely detached clockevent from step 4) are unregistered.
These random events can be factorized if the current clockevent is
detached and stopped by the dying CPU at the generic layer, that is
from the dying CPU:
a) Stop the tick
b) Stop/detach the underlying per-cpu oneshot broadcast clockevent
c) Stop/detach the underlying clockevent
d) Release / unregister the clockevents from b) and c)
e) Release / unregister the remaining clockevents from the dying CPU.
This part could be performed by the dying CPU
This way the drivers and the tick layer don't need to care about
clockevent operations during cpuhotplug down. This also unifies the tick
behaviour on offline CPUs between oneshot and periodic modes, avoiding
offline ticks altogether for sanity.
Adopt the simplification.
[ tglx: Remove the WARN_ON() in clockevents_register_device() as that
is called from an upcoming CPU before the CPU is marked online ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241029125451.54574-3-frederic@kernel.org
Add a function to check that an offline CPU has left the tracing
infrastructure in a sane state.
Commit 9bb69ba4c1 ("ACPI: processor_idle: use raw_safe_halt() in
acpi_idle_play_dead()") fixed an issue where the acpi_idle_play_dead()
function called safe_halt() instead of raw_safe_halt(), which had the
side-effect of setting the hardirqs_enabled flag for the offline CPU.
On x86 this triggered warnings from lockdep_assert_irqs_disabled() when
the CPU was brought back online again later. These warnings were too
early for the exception to be handled correctly, leading to a
triple-fault.
Add lockdep_cleanup_dead_cpu() to check for this kind of failure mode,
print the events leading up to it, and correct it so that the CPU can
come online again correctly. Re-introducing the original bug now merely
results in this warning instead:
[ 61.556652] smpboot: CPU 1 is now offline
[ 61.556769] CPU 1 left hardirqs enabled!
[ 61.556915] irq event stamp: 128149
[ 61.556965] hardirqs last enabled at (128149): [<ffffffff81720a36>] acpi_idle_play_dead+0x46/0x70
[ 61.557055] hardirqs last disabled at (128148): [<ffffffff81124d50>] do_idle+0x90/0xe0
[ 61.557117] softirqs last enabled at (128078): [<ffffffff81cec74c>] __do_softirq+0x31c/0x423
[ 61.557199] softirqs last disabled at (128065): [<ffffffff810baae1>] __irq_exit_rcu+0x91/0x100
[boqun: Capitalize the title and reword the message a bit]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/f7bd2b3b999051bb3ef4be34526a9262008285f5.camel@infradead.org
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
Building the kernel with W=1 generates the following warning:
kernel/cpu.c:2693: warning: This comment starts with '/**',
but isn't a kernel-doc comment.
The function topology_is_core_online() is a simple helper function and
doesn't need a kernel-doc comment.
Use a normal comment instead.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240825221152.71951-2-thorsten.blum@toblux.com
If a core is offline then enabling SMT should not online CPUs of
this core. By enabling SMT, what is intended is either changing the SMT
value from "off" to "on" or setting the SMT level (threads per core) from a
lower to higher value.
On PowerPC the ppc64_cpu utility can be used, among other things, to
perform the following functions:
ppc64_cpu --cores-on # Get the number of online cores
ppc64_cpu --cores-on=X # Put exactly X cores online
ppc64_cpu --offline-cores=X[,Y,...] # Put specified cores offline
ppc64_cpu --smt={on|off|value} # Enable, disable or change SMT level
If the user has decided to offline certain cores, enabling SMT should
not online CPUs in those cores. This patch fixes the issue and changes
the behaviour as described, by introducing an arch specific function
topology_is_core_online(). It is currently implemented only for PowerPC.
Fixes: 73c58e7e14 ("powerpc: Add HOTPLUG_SMT support")
Reported-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Closes: https://groups.google.com/g/powerpc-utils-devel/c/wrwVzAAnRlI/m/5KJSoqP4BAAJ
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240731030126.956210-2-nysal@linux.ibm.com
CONFIG_HOTPLUG_PARALLEL expects the architecture to implement
arch_cpuhp_init_parallel_bringup() to decide whether paralllel hotplug is
possible and to do the necessary architecture specific initialization.
There are architectures which can enable it unconditionally and do not
require architecture specific initialization.
Provide a weak fallback for arch_cpuhp_init_parallel_bringup() so that
such architectures are not forced to implement empty stub functions.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240716-loongarch-hotplug-v3-2-af59b3bb35c8@flygoat.com
Pull x86 confidential computing updates from Borislav Petkov:
"Unrelated x86/cc changes queued here to avoid ugly cross-merges and
conflicts:
- Carve out CPU hotplug function declarations into a separate header
with the goal to be able to use the lockdep assertions in a more
flexible manner
- As a result, refactor cacheinfo code after carving out a function
to return the cache ID associated with a given cache level
- Cleanups
Add support to be able to kexec TDX guests:
- Expand ACPI MADT CPU offlining support
- Add machinery to prepare CoCo guests memory before kexec-ing into a
new kernel
- Cleanup, readjust and massage related code"
* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
x86/mm: Introduce kernel_ident_mapping_free()
x86/smp: Add smp_ops.stop_this_cpu() callback
x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
x86/tdx: Convert shared memory back to private on kexec
x86/mm: Add callbacks to prepare encrypted memory for kexec
x86/tdx: Account shared memory
x86/mm: Return correct level from lookup_address() if pte is none
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
x86/kexec: Keep CR4.MCE set during kexec for TDX guest
x86/relocate_kernel: Use named labels for less confusion
cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
cpu/hotplug: Add support for declaring CPU offlining not supported
x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
x86/acpi: Extract ACPI MADT wakeup code into a separate file
x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
...
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
Pull CPU hotplug updates from Thomas Gleixner:
"A small set of SMP/CPU hotplug updates:
- Reverse the order of iteration when freezing secondary CPUs for
hibernation.
This avoids that drivers like the Intel uncore performance counter
have to transfer the assignement of handling the per package uncore
events for every CPU in a package, which is a considerable speedup
on larger systems.
- Add a missing destroy_work_on_stack() invocation in
smp_call_on_cpu() to prevent debug objects to emit a false positive
warning when the stack is freed.
- Small cleanups in comments and a str_plural() conversion"
* tag 'smp-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Add missing destroy_work_on_stack() call in smp_call_on_cpu()
cpu/hotplug: Reverse order of iteration in freeze_secondary_cpus()
smp: Use str_plural() to fix Coccinelle warnings
cpu/hotplug: Fix typo in comment
The 'offline' file in sysfs shows all offline CPUs, including those
that aren't present. User-space is expected to remove not-present CPUs
from this list to learn which CPUs could be brought online.
CPUs can be present but not-enabled. These CPUs can't be brought online
until the firmware policy changes, which comes with an ACPI notification
that will register the CPUs.
With only the offline and present files, user-space is unable to
determine which CPUs it can try to bring online. Add a new CPU mask
that shows this based on all the registered CPUs.
Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-20-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
After the rework of "Parallel CPU bringup", the cmdline "nosmp" and
"maxcpus=0" parameters are not working anymore. These parameters set
setup_max_cpus to zero and that's handed to bringup_nonboot_cpus().
The code there does a decrement before checking for zero, which brings it
into the negative space and brings up all CPUs.
Add a zero check at the beginning of the function to prevent this.
[ tglx: Massaged change log ]
Fixes: 18415f33e2 ("cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE")
Fixes: 06c6796e03 ("cpu/hotplug: Fix off by one in cpuhp_bringup_mask()")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240618081336.3996825-1-chenhuacai@loongson.cn
ACPI MADT doesn't allow to offline a CPU after it has been woken up.
Currently, CPU hotplug is prevented based on the confidential computing
attribute which is set for Intel TDX. But TDX is not the only possible user of
the wake up method. Any platform that uses ACPI MADT wakeup method cannot
offline CPU.
Disable CPU offlining on ACPI MADT wakeup enumeration.
This has no visible effects for users: currently, TDX guest is the only platform
that uses the ACPI MADT wakeup method.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-5-kirill.shutemov@linux.intel.com
The ACPI MADT mailbox wakeup method doesn't allow to offline a CPU after
it has been woken up.
Currently, offlining is prevented based on the confidential computing attribute
which is set for Intel TDX. But TDX is not the only possible user of the wake up
method. The MADT wakeup can be implemented outside of a confidential computing
environment. Offline support is a property of the wakeup method, not the CoCo
implementation.
Introduce cpu_hotplug_disable_offlining() that can be called to indicate that
CPU offlining should be disabled.
This function is going to replace CC_ATTR_HOTPLUG_DISABLED for ACPI MADT wakeup
method.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-4-kirill.shutemov@linux.intel.com
