Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
Rather, do not retry in generic_map_lookup_batch. If it finds a non
existing element, skip to the next key. This simple solution comes with
a price that transient errors may not be recovered, and the iteration
might cycle back to the first key under parallel deletion. For example,
Hou Tao <houtao@huaweicloud.com> pointed out a following scenario:
For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key
(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.
(3) goto next_key
It swaps the prev_key and key
(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just
like prev_key=NULL case, the returned key will be duplicated.
With the retry logic, the iteration can continue to the key next to the
deleted one. But if we directly skip to the next key, the iteration loop
would restart from the first key for the lpm_trie type.
However, not all races may be recovered. For example, if current key is
deleted after instead of before bpf_map_copy_value, or if the prev_key
also gets deleted, then the loop will still restart from the first key
for lpm_tire anyway. For generic lookup it might be better to stay
simple, i.e. just skip to the next key. To guarantee that the output
keys are not duplicated, it is better to implement map type specific
batch operations, which can properly lock the trie and synchronize with
concurrent mutators.
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Closes: https://lore.kernel.org/bpf/Z6JXtA1M5jAZx8xD@debian.debian/
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/85618439eea75930630685c467ccefeac0942e2b.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We use map->freeze_mutex to prevent races between map_freeze() and
memory mapping BPF map contents with writable permissions. The way we
naively do this means we'll hold freeze_mutex for entire duration of all
the mm and VMA manipulations, which is completely unnecessary. This can
potentially also lead to deadlocks, as reported by syzbot in [0].
So, instead, hold freeze_mutex only during writeability checks, bump
(proactively) "write active" count for the map, unlock the mutex and
proceed with mmap logic. And only if something went wrong during mmap
logic, then undo that "write active" counter increment.
[0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Reported-by: syzbot+4dc041c686b7c816a71e@syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For all BPF maps we ensure that VM_MAYWRITE is cleared when
memory-mapping BPF map contents as initially read-only VMA. This is
because in some cases BPF verifier relies on the underlying data to not
be modified afterwards by user space, so once something is mapped
read-only, it shouldn't be re-mmap'ed as read-write.
As such, it's not necessary to check VM_MAYWRITE in bpf_map_mmap() and
map->ops->map_mmap() callbacks: VM_WRITE should be consistently set for
read-write mappings, and if VM_WRITE is not set, there is no way for
user space to upgrade read-only mapping to read-write one.
This patch cleans up this VM_WRITE vs VM_MAYWRITE handling within
bpf_map_mmap(), which is an entry point for any BPF map mmap()-ing
logic. We also drop unnecessary sanitization of VM_MAYWRITE in BPF
ringbuf's map_mmap() callback implementation, as it is already performed
by common code in bpf_map_mmap().
Note, though, that in bpf_map_mmap_{open,close}() callbacks we can't
drop VM_MAYWRITE use, because it's possible (and is outside of
subsystem's control) to have initially read-write memory mapping, which
is subsequently dropped to read-only by user space through mprotect().
In such case, from BPF verifier POV it's read-write data throughout the
lifetime of BPF map, and is counted as "active writer".
But its VMAs will start out as VM_WRITE|VM_MAYWRITE, then mprotect() can
change it to just VM_MAYWRITE (and no VM_WRITE), so when its finally
munmap()'ed and bpf_map_mmap_close() is called, vm_flags will be just
VM_MAYWRITE, but we still need to decrement active writer count with
bpf_map_write_active_dec() as it's still considered to be a read-write
mapping by the rest of BPF subsystem.
Similar reasoning applies to bpf_map_mmap_open(), which is called
whenever mmap(), munmap(), and/or mprotect() forces mm subsystem to
split original VMA into multiple discontiguous VMAs.
Memory-mapping handling is a bit tricky, yes.
Cc: Jann Horn <jannh@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25c ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
The callers of bpf_obj_free_fields() have already guaranteed that the
migration is disabled, therefore, there is no need to invoke
migrate_{disable,enable} pair in bpf_obj_free_fields()'s underly
implementation.
This patch removes unnecessary migrate_{disable|enable} pairs from
bpf_obj_free_fields() and its callees: bpf_list_head_free() and
bpf_rb_root_free().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250108010728.207536-12-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The freeing of all map elements may invoke bpf_obj_free_fields() to free
the special fields in the map value. Since these special fields may be
allocated from bpf memory allocator, migrate_{disable|enable} pairs are
necessary for the freeing of these special fields.
To simplify reasoning about when migrate_disable() is needed for the
freeing of these special fields, let the caller to guarantee migration
is disabled before invoking bpf_obj_free_fields(). Therefore, disabling
migration before calling ops->map_free() to simplify the freeing of map
values or special fields allocated from bpf memory allocator.
After disabling migration in bpf_map_free(), there is no need for
additional migration_{disable|enable} pairs in these ->map_free()
callbacks. Remove these redundant invocations.
The migrate_{disable|enable} pairs in the underlying implementation of
bpf_obj_free_fields() will be removed by the following patch.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250108010728.207536-11-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The fd_array attribute of the BPF_PROG_LOAD syscall may contain a set
of file descriptors: maps or btfs. This field was introduced as a
sparse array. Introduce a new attribute, fd_array_cnt, which, if
present, indicates that the fd_array is a continuous array of the
corresponding length.
If fd_array_cnt is non-zero, then every map in the fd_array will be
bound to the program, as if it was used by the program. This
functionality is similar to the BPF_PROG_BIND_MAP syscall, but such
maps can be used by the verifier during the program load.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241213130934.1087929-5-aspsk@isovalent.com
Pull tracing updates from Steven Rostedt:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit.
This location is known to allow page faults. The tracepoints are
called under an rcu_read_lock() which does not allow faults that can
sleep. This limits the ability of tracepoint handlers to page fault
in user space system call parameters. Now these tracepoints have been
made "faultable", allowing the callbacks to fault in user space
parameters and record them.
Note, only the infrastructure has been implemented. The consumers
(perf, ftrace, BPF) now need to have their code modified to allow
faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with
atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph
tracer is also running.
When function_graph trace is running along with function tracer, the
parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack
function filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
* tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
ftrace: Fix regression with module command in stack_trace_filter
tracing: Fix function name for trampoline
ftrace: Get the true parent ip for function tracer
tracing: Remove redundant check on field->field in histograms
bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links
bpf: decouple BPF link/attach hook and BPF program sleepable semantics
bpf: put bpf_link's program when link is safe to be deallocated
tracing: Replace strncpy() with strscpy() when copying comm
tracing: Add might_fault() check in __DECLARE_TRACE_SYSCALL
tracing: Fix syscall tracepoint use-after-free
tracing: Introduce tracepoint_is_faultable()
tracing: Introduce tracepoint extended structure
tracing: Remove TRACE_FLAG_IRQS_NOSUPPORT
tracing: Replace multiple deprecated strncpy with memcpy
tracing: Make percpu stack trace buffer invariant to PAGE_SIZE
tracing: Use atomic64_inc_return() in trace_clock_counter()
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
tracing/bpf: Add might_fault check to syscall probes
tracing/perf: Add might_fault check to syscall probes
tracing/ftrace: Add might_fault check to syscall probes
...
Adding support to attach BPF program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two uprobe multi links.
Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the BPF program on return
probe simply by returning zero or non zero from the entry BPF
program execution to execute or not the BPF program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org
Now that kernel supports sleepable tracepoints, the fact that
bpf_probe_unregister() is asynchronous, i.e., that it doesn't wait for
any in-flight tracepoints to conclude before returning, we now need to
delay BPF raw tp link's deallocation and bpf_prog_put() of its
underlying BPF program (regardless of program's own sleepable semantics)
until after full RCU Tasks Trace GP. With that GP over, we'll have
a guarantee that no tracepoint can reach BPF link and thus its BPF program.
We use newly added tracepoint_is_faultable() check to know when this RCU
Tasks Trace GP is necessary and utilize BPF link's own sleepable flag
passed through bpf_link_init_sleepable() initializer.
Link: https://lore.kernel.org/20241101181754.782341-3-andrii@kernel.org
Tested-by: Jordan Rife <jrife@google.com>
Reported-by: Jordan Rife <jrife@google.com>
Fixes: a363d27cdb ("tracing: Allow system call tracepoints to handle page faults")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
BPF link's lifecycle protection scheme depends on both BPF hook and BPF
program. If *either* of those require RCU Tasks Trace GP, then we need
to go through a chain of GPs before putting BPF program refcount and
deallocating BPF link memory.
This patch adds bpf_link-specific sleepable flag, which can be set to
true even if underlying BPF program is not sleepable itself. If either
link->sleepable or link->prog->sleepable is true, we'll go through
a chain of RCU Tasks Trace GP and RCU GP before putting BPF program and
freeing memory.
This will be used to protect BPF link for sleepable (faultable) raw
tracepoints in the next patch.
Link: https://lore.kernel.org/20241101181754.782341-2-andrii@kernel.org
Tested-by: Jordan Rife <jrife@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In general, BPF link's underlying BPF program should be considered to be
reachable through attach hook -> link -> prog chain, and, pessimistically,
we have to assume that as long as link's memory is not safe to free,
attach hook's code might hold a pointer to BPF program and use it.
As such, it's not (generally) correct to put link's program early before
waiting for RCU GPs to go through. More eager bpf_prog_put() that we
currently do is mostly correct due to BPF program's release code doing
similar RCU GP waiting, but as will be shown in the following patches,
BPF program can be non-sleepable (and, thus, reliant on only "classic"
RCU GP), while BPF link's attach hook can have sleepable semantics and
needs to be protected by RCU Tasks Trace, and for such cases BPF link
has to go through RCU Tasks Trace + "classic" RCU GPs before being
deallocated. And so, if we put BPF program early, we might free BPF
program before we free BPF link, leading to use-after-free situation.
So, this patch defers bpf_prog_put() until we are ready to perform
bpf_link's deallocation. At worst, this delays BPF program freeing by
one extra RCU GP, but that seems completely acceptable. Alternatively,
we'd need more elaborate ways to determine BPF hook, BPF link, and BPF
program lifetimes, and how they relate to each other, which seems like
an unnecessary complication.
Note, for most BPF links we still will perform eager bpf_prog_put() and
link dealloc, so for those BPF links there are no observable changes
whatsoever. Only BPF links that use deferred dealloc might notice
slightly delayed freeing of BPF programs.
Also, to reduce code and logic duplication, extract program put + link
dealloc logic into bpf_link_dealloc() helper.
Link: https://lore.kernel.org/20241101181754.782341-1-andrii@kernel.org
Tested-by: Jordan Rife <jrife@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This patch adds uptr support in the map_value of the task local storage.
struct map_value {
struct user_data __uptr *uptr;
};
struct {
__uint(type, BPF_MAP_TYPE_TASK_STORAGE);
__uint(map_flags, BPF_F_NO_PREALLOC);
__type(key, int);
__type(value, struct value_type);
} datamap SEC(".maps");
A new bpf_obj_pin_uptrs() is added to pin the user page and
also stores the kernel address back to the uptr for the
bpf prog to use later. It currently does not support
the uptr pointing to a user struct across two pages.
It also excludes PageHighMem support to keep it simple.
As of now, the 32bit bpf jit is missing other more crucial bpf
features. For example, many important bpf features depend on
bpf kfunc now but so far only one arch (x86-32) supports it
which was added by me as an example when kfunc was first
introduced to bpf.
The uptr can only be stored to the task local storage by the
syscall update_elem. Meaning the uptr will not be considered
if it is provided by the bpf prog through
bpf_task_storage_get(BPF_LOCAL_STORAGE_GET_F_CREATE).
This is enforced by only calling
bpf_local_storage_update(swap_uptrs==true) in
bpf_pid_task_storage_update_elem. Everywhere else will
have swap_uptrs==false.
This will pump down to bpf_selem_alloc(swap_uptrs==true). It is
the only case that bpf_selem_alloc() will take the uptr value when
updating the newly allocated selem. bpf_obj_swap_uptrs() is added
to swap the uptr between the SDATA(selem)->data and the user provided
map_value in "void *value". bpf_obj_swap_uptrs() makes the
SDATA(selem)->data takes the ownership of the uptr and the user space
provided map_value will have NULL in the uptr.
The bpf_obj_unpin_uptrs() is called after map->ops->map_update_elem()
returning error. If the map->ops->map_update_elem has reached
a state that the local storage has taken the uptr ownership,
the bpf_obj_unpin_uptrs() will be a no op because the uptr
is NULL. A "__"bpf_obj_unpin_uptrs is added to make this
error path unpin easier such that it does not have to check
the map->record is NULL or not.
BPF_F_LOCK is not supported when the map_value has uptr.
This can be revisited later if there is a use case. A similar
swap_uptrs idea can be considered.
The final bit is to do unpin_user_page in the bpf_obj_free_fields().
The earlier patch has ensured that the bpf_obj_free_fields() has
gone through the rcu gp when needed.
Cc: linux-mm@kvack.org
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/r/20241023234759.860539-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch introduces the "__uptr" type tag to BTF. It is to define
a pointer pointing to the user space memory. This patch adds BTF
logic to pass the "__uptr" type tag.
btf_find_kptr() is reused for the "__uptr" tag. The "__uptr" will only
be supported in the map_value of the task storage map. However,
btf_parse_struct_meta() also uses btf_find_kptr() but it is not
interested in "__uptr". This patch adds a "field_mask" argument
to btf_find_kptr() which will return BTF_FIELD_IGNORE if the
caller is not interested in a “__uptr” field.
btf_parse_kptr() is also reused to parse the uptr.
The btf_check_and_fixup_fields() is changed to do extra
checks on the uptr to ensure that its struct size is not larger
than PAGE_SIZE. It is not clear how a uptr pointing to a CO-RE
supported kernel struct will be used, so it is also not allowed now.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-3-houtao@huaweicloud.com
Add a MEM_WRITE attribute for BPF helper functions which can be used in
bpf_func_proto to annotate an argument type in order to let the verifier
know that the helper writes into the memory passed as an argument. In
the past MEM_UNINIT has been (ab)used for this function, but the latter
merely tells the verifier that the passed memory can be uninitialized.
There have been bugs with overloading the latter but aside from that
there are also cases where the passed memory is read + written which
currently cannot be expressed, see also 4b3786a6c5 ("bpf: Zero former
ARG_PTR_TO_{LONG,INT} args in case of error").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241021152809.33343-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously when retrieving `bpf_link_info.perf_event` for
kprobe/uprobe/tracepoint, the `name_len` field was not populated by the
kernel, leaving it to reflect the value initially set by the user. This
behavior was inconsistent with how other input/output string buffer
fields function (e.g. `raw_tracepoint.tp_name_len`).
This patch fills `name_len` with the actual size of the string name.
Fixes: 1b715e1b0e ("bpf: Support ->fill_link_info for perf_event")
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20241008164312.46269-1-wudevelops@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf 'struct fd' updates from Alexei Starovoitov:
"This includes struct_fd BPF changes from Al and Andrii"
* tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: convert bpf_token_create() to CLASS(fd, ...)
security,bpf: constify struct path in bpf_token_create() LSM hook
bpf: more trivial fdget() conversions
bpf: trivial conversions for fdget()
bpf: switch maps to CLASS(fd, ...)
bpf: factor out fetching bpf_map from FD and adding it to used_maps list
bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)
bpf: convert __bpf_prog_get() to CLASS(fd, ...)
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
When security_bpf_map_create() in map_create() fails, map_create() will
call btf_put() and ->map_free() callback to free the map. It doesn't
free the btf_record of map value, so add the missed btf_record_free()
when map creation fails.
However btf_record_free() needs to be called after ->map_free() just
like bpf_map_free_deferred() did, because ->map_free() may use the
btf_record to free the special fields in preallocated map value. So
factor out bpf_map_free() helper to free the map, btf_record, and btf
orderly and use the helper in both map_create() and
bpf_map_free_deferred().
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240912012845.3458483-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input
arguments, zero the value for the case of an error as otherwise it could leak
memory. For tracing, it is not needed given CAP_PERFMON can already read all
kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped
in here.
Also, the MTU helpers mtu_len pointer value is being written but also read.
Technically, the MEM_UNINIT should not be there in order to always force init.
Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now
implies two things actually: i) write into memory, ii) memory does not have
to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory,
ii) memory must be initialized. This means that for bpf_*_check_mtu() we're
readding the issue we're trying to fix, that is, it would then be able to
write back into things like .rodata BPF maps. Follow-up work will rework the
MEM_UNINIT semantics such that the intent can be better expressed. For now
just clear the *mtu_len on error path which can be lifted later again.
Fixes: 8a67f2de9b ("bpf: expose bpf_strtol and bpf_strtoul to all program types")
Fixes: d7a4cb9b67 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/e5edd241-59e7-5e39-0ee5-a51e31b6840a@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-5-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.
In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.
The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.
However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via *<ptr> = val.
The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>).
MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated
argument types, since in !MEM_FIXED_SIZE cases the verifier does not know
the buffer size a priori and therefore cannot blindly write *<ptr> = val.
Fixes: 57c3bb725a ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240913191754.13290-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
