Initially, ceph_fs_debugfs_init() had temporary
name buffer with hardcoded length of 80 symbols.
Then, it was hardcoded again for 100 symbols.
Finally, it makes sense to exchange hardcoded
value on properly defined constant and 255 symbols
should be enough for any name case.
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Patrick Donnelly <pdonnell@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When trimming the caps and just after the 'session->s_cap_lock' is
released in ceph_iterate_session_caps() the cap maybe removed by
another thread, and when using the stale cap memory in the callbacks
it will trigger use-after-free crash.
We need to check the existence of the cap just after the 'ci->i_ceph_lock'
being acquired. And do nothing if it's already removed.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/43272
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch adds latency and size metrics for remote object copies
operations ("copyfrom"). For now, these metrics will be available on the
client only, they won't be sent to the MDS.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch modifies struct ceph_client_metric so that each metric block
(read, write and metadata) becomes an element in a array. This allows to
also re-write the helper functions that handle these blocks, making them
simpler and, above all, reduce the amount of copy&paste every time a new
metric is added.
Thus, for each of these metrics there will be a new struct ceph_metric
entry that'll will contain all the sizes and latencies fields (and a lock).
Note however that the metadata metric doesn't really use the size_fields,
and thus this metric won't be shown in the debugfs '../metrics/size' file.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently, all the metrics are grouped together in a single file, making
it difficult to process this file from scripts. Furthermore, as new
metrics are added, processing this file will become even more challenging.
This patch turns the 'metric' file into a directory that will contain
several files, one for each metric.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This will collect IO's total size and then calculate the average
size, and also will collect the min/max IO sizes.
The debugfs will show the size metrics in bytes and will let the
userspace applications to switch to what they need.
URL: https://tracker.ceph.com/issues/49913
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In client for each inode, it may have many opened files and may
have been pinned in more than one MDS servers. And some inodes
are idle, which have no any opened files.
This patch will show these metrics in the debugfs, likes:
item total
-----------------------------------------
opened files / total inodes 14 / 5
pinned i_caps / total inodes 7 / 5
opened inodes / total inodes 3 / 5
Will send these metrics to ceph, which will be used by the `fs top`,
later.
[ jlayton: drop unrelated hunk, count hashed inodes instead of
allocated ones ]
URL: https://tracker.ceph.com/issues/47005
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In multi-mds, the 'caps' debugfs file will have duplicate ino,
add the 'mds' column to indicate which mds session the cap belongs to.
Signed-off-by: Yanhu Cao <gmayyyha@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tuan and Ulrich mentioned that they were hitting a problem on s390x,
which has a 32-bit ino_t value, even though it's a 64-bit arch (for
historical reasons).
I think the current handling of inode numbers in the ceph driver is
wrong. It tries to use 32-bit inode numbers on 32-bit arches, but that's
actually not a problem. 32-bit arches can deal with 64-bit inode numbers
just fine when userland code is compiled with LFS support (the common
case these days).
What we really want to do is just use 64-bit numbers everywhere, unless
someone has mounted with the ino32 mount option. In that case, we want
to ensure that we hash the inode number down to something that will fit
in 32 bits before presenting the value to userland.
Add new helper functions that do this, and only do the conversion before
presenting these values to userland in getattr and readdir.
The inode table hashvalue is changed to just cast the inode number to
unsigned long, as low-order bits are the most likely to vary anyway.
While it's not strictly required, we do want to put something in
inode->i_ino. Instead of basing it on BITS_PER_LONG, however, base it on
the size of the ino_t type.
NOTE: This is a user-visible change on 32-bit arches:
1/ inode numbers will be seen to have changed between kernel versions.
32-bit arches will see large inode numbers now instead of the hashed
ones they saw before.
2/ any really old software not built with LFS support may start failing
stat() calls with -EOVERFLOW on inode numbers >2^32. Nothing much we
can do about these, but hopefully the intersection of people running
such code on ceph will be very small.
The workaround for both problems is to mount with "-o ino32".
[ idryomov: changelog tweak ]
URL: https://tracker.ceph.com/issues/46828
Reported-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Reported-and-Tested-by: Tuan Hoang1 <Tuan.Hoang1@ibm.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The variable mds is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This will help to reduce using the global mdsc->mutex lock in many
places.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Calculate the latency for OSD read requests. Add a new r_end_stamp
field to struct ceph_osd_request that will hold the time of that
the reply was received. Use that to calculate the RTT for each call,
and divide the sum of those by number of calls to get averate RTT.
Keep a tally of RTT for OSD writes and number of calls to track average
latency of OSD writes.
URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For dentry leases, only count the hit/miss info triggered from the vfs
calls. For the cases like request reply handling and ceph_trim_dentries,
ignore them.
For now, these are only viewable using debugfs. Future patches will
allow the client to send the stats to the MDS.
The output looks like:
item total miss hit
-------------------------------------------------
d_lease 11 7 141
URL: https://tracker.ceph.com/issues/43215
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Although CEPH_DEFINE_SHOW_FUNC is much older, it now duplicates
DEFINE_SHOW_ATTRIBUTE from linux/seq_file.h.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The m_num_mds here is actually the number for MDSs which are in
up:active status, and it will be duplicated to m_num_active_mds,
so remove it.
Add possible_max_rank to the mdsmap struct and this will be
the correctly possible largest rank boundary.
Remove the special case for one mds in __mdsmap_get_random_mds(),
because the validate mds rank may not always be 0.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add some visibility of tasks that are waiting for caps to the "caps"
debugfs file. Display the tgid of the waiting task, inode number, and
the caps the task needs and wants.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
