Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
Compared to the SNP Guest Request, the "Extended" version adds data pages for
receiving certificates. If not enough pages provided, the HV can report to the
VM how much is needed so the VM can reallocate and repeat.
Commit
ae596615d9 ("virt: sev-guest: Reduce the scope of SNP command mutex")
moved handling of the allocated/desired pages number out of scope of said
mutex and create a possibility for a race (multiple instances trying to
trigger Extended request in a VM) as there is just one instance of
snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex.
Fix the issue by moving the data blob/size and the GHCB input struct
(snp_req_data) into snp_guest_req which is allocated on stack now and accessed
by the GHCB caller under that mutex.
Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four
callers needs it. Free the received blob in get_ext_report() right after it is
copied to the userspace. Possible future users of snp_send_guest_request() are
likely to have different ideas about the buffer size anyways.
Fixes: ae596615d9 ("virt: sev-guest: Reduce the scope of SNP command mutex")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com
In the "pmcmd_ioctl" function, three memory objects allocated by
kmalloc are initialized by "hcall_get_cpu_state", which are then
copied to user space. The initializer is indeed implemented in
"acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of
information leakage due to uninitialized bytes.
Fixes: 3d679d5aec ("virt: acrn: Introduce interfaces to query C-states and P-states allowed by hypervisor")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Cc: stable <stable@kernel.org>
Acked-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20250130115811.92424-1-lihaoyu499@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vboxguest driver depends on port I/O for debug output:
include/asm-generic/io.h:626:15: error: call to '_outl' declared with attribute error: outl() requires CONFIG_HAS_IOPORT
626 | #define _outl _outl
include/asm-generic/io.h:663:14: note: in expansion of macro '_outl'
663 | #define outl _outl
| ^~~~~
drivers/virt/vboxguest/vboxguest_utils.c:102:9: note: in expansion of macro 'outl'
102 | outl(phys_req, gdev->io_port + VMMDEV_PORT_OFF_REQUEST);
| ^~~~
Most arm64 platforms don't actually support port I/O, though it is
currently enabled unconditionally. Refine the vbox dependency to allow
turning HAS_IOPORT off in the future when building for platforms without
port I/O and allow compile-testing on all architectures.
Fixes: 5cf8f938bf ("vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250122065445.1469218-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 SEV updates from Borislav Petkov:
- A segmented Reverse Map table (RMP) is a across-nodes distributed
table of sorts which contains per-node descriptors of each node-local
4K page, denoting its ownership (hypervisor, guest, etc) in the realm
of confidential computing. Add support for such a table in order to
improve referential locality when accessing or modifying RMP table
entries
- Add support for reading the TSC in SNP guests by removing any
interference or influence the hypervisor might have, with the goal of
making a confidential guest even more independent from the hypervisor
* tag 'x86_sev_for_v6.14_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Add the Secure TSC feature for SNP guests
x86/tsc: Init the TSC for Secure TSC guests
x86/sev: Mark the TSC in a secure TSC guest as reliable
x86/sev: Prevent RDTSC/RDTSCP interception for Secure TSC enabled guests
x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests
x86/sev: Change TSC MSR behavior for Secure TSC enabled guests
x86/sev: Add Secure TSC support for SNP guests
x86/sev: Relocate SNP guest messaging routines to common code
x86/sev: Carve out and export SNP guest messaging init routines
virt: sev-guest: Replace GFP_KERNEL_ACCOUNT with GFP_KERNEL
virt: sev-guest: Remove is_vmpck_empty() helper
x86/sev/docs: Document the SNP Reverse Map Table (RMP)
x86/sev: Add full support for a segmented RMP table
x86/sev: Treat the contiguous RMP table as a single RMP segment
x86/sev: Map only the RMP table entries instead of the full RMP range
x86/sev: Move the SNP probe routine out of the way
x86/sev: Require the RMPREAD instruction after Zen4
x86/sev: Add support for the RMPREAD instruction
x86/sev: Prepare for using the RMPREAD instruction to access the RMP
Pull arm64 updates from Will Deacon:
"We've got a little less than normal thanks to the holidays in
December, but there's the usual summary below. The highlight is
probably the 52-bit physical addressing (LPA2) clean-up from Ard.
Confidential Computing:
- Register a platform device when running in CCA realm mode to enable
automatic loading of dependent modules
CPU Features:
- Update a bunch of system register definitions to pick up new field
encodings from the architectural documentation
- Add hwcaps and selftests for the new (2024) dpISA extensions
Documentation:
- Update EL3 (firmware) requirements for booting Linux on modern
arm64 designs
- Remove stale information about the kernel virtual memory map
Miscellaneous:
- Minor cleanups and typo fixes
Memory management:
- Fix vmemmap_check_pmd() to look at the PMD type bits
- LPA2 (52-bit physical addressing) cleanups and minor fixes
- Adjust physical address space depending upon whether or not LPA2 is
enabled
Perf and PMUs:
- Add port filtering support for NVIDIA's NVLINK-C2C Coresight PMU
- Extend AXI filtering support for the DDR PMU on NXP IMX SoCs
- Fix Designware PCIe PMU event numbering
- Add generic branch events for the Apple M1 CPU PMU
- Add support for Marvell Odyssey DDR and LLC-TAD PMUs
- Cleanups to the Hisilicon DDRC and Uncore PMU code
- Advertise discard mode for the SPE PMU
- Add the perf users mailing list to our MAINTAINERS entry"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
Documentation: arm64: Remove stale and redundant virtual memory diagrams
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
arm64: Remove duplicate included header
drivers/perf: apple_m1: Map generic branch events
arm64: rsi: Add automatic arm-cca-guest module loading
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
...
Pull misc vfs updates from Christian Brauner:
"Features:
- Support caching symlink lengths in inodes
The size is stored in a new union utilizing the same space as
i_devices, thus avoiding growing the struct or taking up any more
space
When utilized it dodges strlen() in vfs_readlink(), giving about
1.5% speed up when issuing readlink on /initrd.img on ext4
- Add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
If a file system supports uncached buffered IO, it may set
FOP_DONTCACHE and enable support for RWF_DONTCACHE.
If RWF_DONTCACHE is attempted without the file system supporting
it, it'll get errored with -EOPNOTSUPP
- Enable VBOXGUEST and VBOXSF_FS on ARM64
Now that VirtualBox is able to run as a host on arm64 (e.g. the
Apple M3 processors) we can enable VBOXSF_FS (and in turn
VBOXGUEST) for this architecture.
Tested with various runs of bonnie++ and dbench on an Apple MacBook
Pro with the latest Virtualbox 7.1.4 r165100 installed
Cleanups:
- Delay sysctl_nr_open check in expand_files()
- Use kernel-doc includes in fiemap docbook
- Use page->private instead of page->index in watch_queue
- Use a consume fence in mnt_idmap() as it's heavily used in
link_path_walk()
- Replace magic number 7 with ARRAY_SIZE() in fc_log
- Sort out a stale comment about races between fd alloc and dup2()
- Fix return type of do_mount() from long to int
- Various cosmetic cleanups for the lockref code
Fixes:
- Annotate spinning as unlikely() in __read_seqcount_begin
The annotation already used to be there, but got lost in commit
52ac39e5db ("seqlock: seqcount_t: Implement all read APIs as
statement expressions")
- Fix proc_handler for sysctl_nr_open
- Flush delayed work in delayed fput()
- Fix grammar and spelling in propagate_umount()
- Fix ESP not readable during coredump
In /proc/PID/stat, there is the kstkesp field which is the stack
pointer of a thread. While the thread is active, this field reads
zero. But during a coredump, it should have a valid value
However, at the moment, kstkesp is zero even during coredump
- Don't wake up the writer if the pipe is still full
- Fix unbalanced user_access_end() in select code"
* tag 'vfs-6.14-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
gfs2: use lockref_init for qd_lockref
erofs: use lockref_init for pcl->lockref
dcache: use lockref_init for d_lockref
lockref: add a lockref_init helper
lockref: drop superfluous externs
lockref: use bool for false/true returns
lockref: improve the lockref_get_not_zero description
lockref: remove lockref_put_not_zero
fs: Fix return type of do_mount() from long to int
select: Fix unbalanced user_access_end()
vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64
pipe_read: don't wake up the writer if the pipe is still full
selftests: coredump: Add stackdump test
fs/proc: do_task_stat: Fix ESP not readable during coredump
fs: add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
fs: sort out a stale comment about races between fd alloc and dup2
fs: Fix grammar and spelling in propagate_umount()
fs: fc_log replace magic number 7 with ARRAY_SIZE()
fs: use a consume fence in mnt_idmap()
file: flush delayed work in delayed fput()
...
The TSM module provides guest identification and attestation when a
guest runs in CCA realm mode. By creating a dummy platform device,
let's ensure the module is automatically loaded. The udev daemon loads
the TSM module after it receives a device addition event. Once that
happens, it can be used earlier in the boot process to decrypt the
rootfs.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241220181236.172060-2-jeremy.linton@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
At present, the SEV guest driver exclusively handles SNP guest messaging. All
routines for sending guest messages are embedded within it.
To support Secure TSC, SEV-SNP guests must communicate with the AMD Security
Processor during early boot. However, these guest messaging functions are not
accessible during early boot since they are currently part of the guest
driver.
Hence, relocate the core SNP guest messaging functions to SEV common code and
provide an API for sending SNP guest messages.
No functional change, but just an export symbol added for
snp_send_guest_request() and dropped the export symbol on
snp_issue_guest_request() and made it static.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-5-nikunj@amd.com
Currently, the sev-guest driver is the only user of SNP guest messaging. All
routines for initializing SNP guest messaging are implemented within the
sev-guest driver and are not available during early boot.
In preparation for adding Secure TSC guest support, carve out APIs to allocate
and initialize the guest messaging descriptor context and make it part of
coco/sev/core.c. As there is no user of sev_guest_platform_data anymore,
remove the structure.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-4-nikunj@amd.com
Replace GFP_KERNEL_ACCOUNT with GFP_KERNEL in the sev-guest driver code.
GFP_KERNEL_ACCOUNT is typically used for accounting untrusted userspace
allocations. After auditing the sev-guest code, the following changes are
necessary:
* snp_init_crypto(): Use GFP_KERNEL as this is a trusted device probe
path.
Retain GFP_KERNEL_ACCOUNT in the following cases for robustness and
specific path requirements:
* alloc_shared_pages(): Although all allocations are limited, retain
GFP_KERNEL_ACCOUNT for future robustness.
* get_report() and get_ext_report(): These functions are on the unlocked
ioctl path and should continue using GFP_KERNEL_ACCOUNT.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-3-nikunj@amd.com
Remove is_vmpck_empty() which uses a local array allocation to check if the
VMPCK is empty and replace it with memchr_inv() to directly determine if the
VMPCK is empty without additional memory allocation.
[ bp: Massage commit message. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-2-nikunj@amd.com
In CoCo VMs it is possible for the untrusted host to cause
set_memory_decrypted() to fail such that an error is returned
and the resulting memory is shared. Callers need to take care
to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional
or security issues.
Leak the decrypted memory when set_memory_decrypted() fails,
and don't need to print an error since set_memory_decrypted()
will call WARN_ONCE().
Fixes: f4738f56d1 ("virt: tdx-guest: Add Quote generation support using TSM_REPORTS")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240619111801.25630-1-lirongqing%40baidu.com
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
Calling the MMIO_GUARD hypercall from guests which have not been
enrolled (e.g. because they are running without pvmfw) results in
-EINVAL being returned. In this case, MMIO_GUARD is not active
and so we can simply proceed with the normal ioremap() routine.
Don't fail ioremap() if MMIO_GUARD fails; instead WARN_ON_ONCE()
to highlight that the pvm environment is slightly wonky.
Fixes: 0f12694958 ("drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241202145731.6422-2-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 SEV updates from Borislav Petkov:
- Do the proper memory conversion of guest memory in order to be able
to kexec kernels in SNP guests along with other adjustments and
cleanups to that effect
- Start converting and moving functionality from the sev-guest driver
into core code with the purpose of supporting the secure TSC SNP
feature where the hypervisor cannot influence the TSC exposed to the
guest anymore
- Add a "nosnp" cmdline option in order to be able to disable SNP
support in the hypervisor and thus free-up resources which are not
going to be used
- Cleanups
[ Reminding myself about the endless TLA's again: SEV is the AMD Secure
Encrypted Virtualization - Linus ]
* tag 'x86_sev_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Cleanup vc_handle_msr()
x86/sev: Convert shared memory back to private on kexec
x86/mm: Refactor __set_clr_pte_enc()
x86/boot: Skip video memory access in the decompressor for SEV-ES/SNP
virt: sev-guest: Carve out SNP message context structure
virt: sev-guest: Reduce the scope of SNP command mutex
virt: sev-guest: Consolidate SNP guest messaging parameters to a struct
x86/sev: Cache the secrets page address
x86/sev: Handle failures from snp_init()
virt: sev-guest: Use AES GCM crypto library
x86/virt: Provide "nosnp" boot option for sev kernel command line
x86/virt: Move SEV-specific parsing into arch/x86/virt/svm
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
in all of those failure exits prior to fdget() are plain returns and
the only thing done after fdput() is (on failure exits) a kfree(),
which can be done before fdput() just fine.
NOTE: in acrn_irqfd_assign() 'fail:' failure exit is wrong for
eventfd_ctx_fileget() failure (we only want fdput() there) and once
we stop doing that, it doesn't need to check if eventfd is NULL or
ERR_PTR(...) there.
NOTE: in privcmd we move fdget() up before the allocation - more
to the point, before the copy_from_user() attempt.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Introduce an arm-cca-guest driver that registers with
the configfs-tsm module to provide user interfaces for
retrieving an attestation token.
When a new report is requested the arm-cca-guest driver
invokes the appropriate RSI interfaces to query an
attestation token.
The steps to retrieve an attestation token are as follows:
1. Mount the configfs filesystem if not already mounted
mount -t configfs none /sys/kernel/config
2. Generate an attestation token
report=/sys/kernel/config/tsm/report/report0
mkdir $report
dd if=/dev/urandom bs=64 count=1 > $report/inblob
hexdump -C $report/outblob
rmdir $report
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20241017131434.40935-11-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently, the sev-guest driver is the only user of SNP guest messaging.
The snp_guest_dev structure holds all the allocated buffers, secrets page
and VMPCK details. In preparation for adding messaging allocation and
initialization APIs, decouple snp_guest_dev from messaging-related
information by carving out the guest message context
structure(snp_msg_desc).
Incorporate this newly added context into snp_send_guest_request() and all
related functions, replacing the use of the snp_guest_dev.
No functional change.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20241009092850.197575-7-nikunj@amd.com
The SNP command mutex is used to serialize access to the shared buffer,
command handling, and message sequence number.
All shared buffer, command handling, and message sequence updates are done
within snp_send_guest_request(), so moving the mutex to this function is
appropriate and maintains the critical section.
Since the mutex is now taken at a later point in time, remove the lockdep
checks that occur before taking the mutex.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20241009092850.197575-6-nikunj@amd.com
