HDS options(tcp-data-split, hds-thresh) have dependencies between other
features like XDP. Basic dependencies are checked in the core API.
netdevsim is very useful to check basic dependencies.
The default tcp-data-split mode is UNKNOWN but netdevsim driver
returns ENABLED when ethtool dumps tcp-data-split mode.
The default value of HDS threshold is 0 and the maximum value is 1024.
ethtool shows like this.
ethtool -g eni1np1
Ring parameters for eni1np1:
Pre-set maximums:
...
HDS thresh: 1024
Current hardware settings:
...
TCP data split: on
HDS thresh: 0
ethtool -G eni1np1 tcp-data-split on hds-thresh 1024
ethtool -g eni1np1
Ring parameters for eni1np1:
Pre-set maximums:
...
HDS thresh: 1024
Current hardware settings:
...
TCP data split: on
HDS thresh: 1024
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-10-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add queue management API support. We need a way to reset queues
to test NAPI reordering, the queue management API provides a
handy scaffolding for that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make nsim->rqs an array of pointers and allocate them individually
so that we can swap them out one by one.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add NAPI support to netdevim, similar to veth.
* Add a nsim_rq rx queue structure to hold a NAPI instance and a skb
queue.
* During xmit, store the skb in the peer skb queue and schedule NAPI.
* During napi_poll(), drain the skb queue and pass up the stack.
* Add assoc between rxq and NAPI instance using netif_queue_set_napi().
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add very basic page pool use so that we can exercise
the netlink uAPI in a selftest.
Page pool gets created on open, destroyed on close.
But we control allocating of a single page thru debugfs.
This page may survive past the page pool itself so that
we can test orphaned page pools.
Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Forward skbs sent from one netdevsim port to its connected netdevsim
port using dev_forward_skb, in a spirit similar to veth.
Add a tx_dropped variable to struct netdevsim, tracking the number of
skbs that could not be forwarded using dev_forward_skb().
The xmit() function accessing the peer ptr is protected by an RCU read
critical section. The rcu_read_lock() is functionally redundant as since
v5.0 all softirqs are implicitly RCU read critical sections; but it is
useful for human readers.
If another CPU is concurrently in nsim_destroy(), then it will first set
the peer ptr to NULL. This does not affect any existing readers that
dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is
a synchronize_rcu() before the netdev is actually unregistered and
freed. This ensures that any readers i.e. xmit() that got a non-NULL
peer will complete before the netdev is freed.
Any readers after the RCU_INIT_POINTER() but before synchronize_rcu()
will dereference NULL, making it safe.
The codepath to nsim_destroy() and nsim_create() takes both the newly
added nsim_dev_list_lock and rtnl_lock. This makes it safe with
concurrent calls to linking two netdevsims together.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two netdevsim bus attribute to sysfs:
/sys/bus/netdevsim/link_device
/sys/bus/netdevsim/unlink_device
Writing "A M B N" to link_device will link netdevsim M in netnsid A with
netdevsim N in netnsid B.
Writing "A M" to unlink_device will unlink netdevsim M in netnsid A from
its peer, if any.
rtnl_lock is taken to ensure nothing changes during the linking.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc
emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has
a PTP clock, so that it is reasonably capable of offloading the schedule.
By using the mock PHC driver, that becomes possible.
Hardware timestamping is not necessary, and netdevsim does not support
packet I/O anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the kernel is compiled with MACsec support, add the
NETIF_F_HW_MACSEC feature to netdevsim devices and implement
macsec_ops.
To allow easy testing of failure from the device, support is limited
to 3 SecY's per netdevsim device, and 1 RXSC per SecY.
v2:
- nsim_macsec_add_secy, return -ENOSPC if secy_count isn't full but
we can't find an empty slot (Simon Horman)
- add sci_to_cpu to make sparse happy (Simon Horman)
- remove set but not used secy variable (kernel test robot and
Simon Horman)
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare for devlink reload being called with devlink->lock held and
convert the netdevsim driver to use unlocked devlink API during init and
fini flows. Take devl_lock() in reload_down() and reload_up() ops in the
meantime before reload cmd is converted to take the lock itself.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to the previous commit, use the devlink instance
lock and let it replace the vfs_lock.
nsim_esw_legacy_enable() was locked by both port lock and
vfs lock so one set of lock/unlocks goes away.
netdevsim's .eswitch_mode_set callback is now ready for
the callback to take the instance lock.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Take advantage of the devlink instance lock for protecting
the port list. This will simplify locking even more once
all devlink callbacks hold the instance lock.
We need to add locking in nsim_dev_port_add_all() which used
to assume higher layer protection when accessing the list.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for testing of HW stats support that was added recently, namely
the L3 stats support. L3 stats are provided for devices for which the L3
stats have been turned on, and that were enabled for netdevsim through a
debugfs toggle:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/enable_ifindex
For fully enabled netdevices, netdevsim counts 10pps of ingress traffic and
20pps of egress traffic. Similarly, L3 stats can be disabled for a given
device, and netdevsim ceases pretending there is any HW traffic going on:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/disable_ifindex
Besides this, there is a third toggle to mark a device for future failure:
# echo $ifindex > /sys/kernel/debug/netdevsim/$DEV/hwstats/l3/fail_next_enable
A future request to enable L3 stats on such netdevice will be bounced by
netdevsim:
# ip -j l sh dev d | jq '.[].ifindex'
66
# echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/enable_ifindex
# echo 66 > /sys/kernel/debug/netdevsim/netdevsim10/hwstats/l3/fail_next_enable
# ip stats set dev d l3_stats on
Error: netdevsim: Stats enablement set to fail.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename functions serving as driver entry points
from nsim_dev_... to nsim_drv_... this makes the
API boundary between bus and dev clearer.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
max_vfs is a strange little beast because the file
hangs off of nsim's debugfs, but it configures a field
in the bus device. Move it to dev.c, let's look at it
as if the device driver was imposing VF limit based
on FW info (like pci_sriov_set_totalvfs()).
Again, when moving refactor the function not to hold
the vfs lock pointlessly while parsing the input.
Wrap the access from the read side in READ_ONCE()
to appease concurrency checkers. Do not check if
return value from snprintf() is negative...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since "eswitch" configuration was added bus.c contains
a lot of device details which really belong to dev.c.
Restructure the code while moving it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When netdevsim got split into the faux bus vfconfig ended
up in the bus device (think pci_dev) which is strange because
it contains very networky not to say netdevy information.
Move it to nsim_dev, which is the driver "priv" structure
for the device.
To make sure we don't race with probe/remove take
the device lock (much like PCI).
While at it remove the NULL-checking of vfconfigs.
It appears to be pointless.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For testing visibility of mq/mqprio default children.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't progress with adding and deleting ports as long as devlink
reload is running.
Fixes: 23809a726c ("netdevsim: Forbid devlink reload when adding or deleting ports")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently netdevsim only supports a single queue per port, which is
insufficient for testing multi-queue TC schedulers e.g. sch_mq. Extend
the current sysfs interface so that users can create ports with multiple
queues:
$ echo "[ID] [PORT_COUNT] [NUM_QUEUES]" > /sys/bus/netdevsim/new_device
As an example, echoing "2 4 8" creates 4 ports, with 8 queues per port.
Note, this is compatible with the current interface, with default number
of queues set to 1. For example, echoing "2 4" creates 4 ports with 1
queue per port; echoing "2" simply creates 1 port with 1 queue.
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink_trap tests for the netdevsim fail due to misspelled
debugfs file name. Change this name, as well as name of callback
function, to match the naming as in the devlink itself - 'trap_drop_counter'.
Test-results:
selftests: drivers/net/netdevsim: devlink_trap.sh
TEST: Initialization [ OK ]
TEST: Trap action [ OK ]
TEST: Trap metadata [ OK ]
TEST: Non-existing trap [ OK ]
TEST: Non-existing trap action [ OK ]
TEST: Trap statistics [ OK ]
TEST: Trap group action [ OK ]
TEST: Non-existing trap group [ OK ]
TEST: Trap group statistics [ OK ]
TEST: Trap policer [ OK ]
TEST: Trap policer binding [ OK ]
TEST: Port delete [ OK ]
TEST: Device delete [ OK ]
Fixes: a7b3527a43 ("drivers: net: netdevsim: add devlink trap_drop_counter_get implementation")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever query statistics is issued for trap with DROP action,
devlink subsystem would also fill-in statistics 'dropped' field.
In case if device driver did't register callback for hard drop
statistics querying, 'dropped' field will be omitted and not filled.
Add trap_drop_counter_get callback implementation to the netdevsim.
Add new test cases for netdevsim, to test both the callback
functionality, as well as drop statistics alteration check.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
