Memory controller drivers for v6.14 - TI
TI AEMIF driver enhancements: some refactoring around timing
parameters and finally adding plus exporting interfaces for devices
using the AEMIF interface (e.g. TI Davinci NAND controller) to better
configure the memory interface.
The exported functions are going to be used by:
drivers/mtd/nand/raw/davinci_nand.c
* tag 'memory-controller-drv-ti-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: ti-aemif: Export aemif_*_cs_timings()
memory: ti-aemif: Create aemif_set_cs_timings()
memory: ti-aemif: Create aemif_check_cs_timings()
memory: ti-aemif: Wrap CS timings into a struct
memory: ti-aemif: Remove unnecessary local variables
memory: ti-aemif: Store timings parameter in number of cycles - 1
Link: https://lore.kernel.org/r/20241231133534.136771-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As of_find_node_by_name() release the reference of the argument device
node, tegra_emc_find_node_by_ram_code() releases some device nodes while
still in use, resulting in possible UAFs. According to the bindings and
the in-tree DTS files, the "emc-tables" node is always device's child
node with the property "nvidia,use-ram-code", and the "lpddr2" node is a
child of the "emc-tables" node. Thus utilize the
for_each_child_of_node() macro and of_get_child_by_name() instead of
of_find_node_by_name() to simplify the code.
This bug was found by an experimental verification tool that I am
developing.
Fixes: 96e5da7c84 ("memory: tegra: Introduce Tegra20 EMC driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241217091434.1993597-1-joe@pf.is.s.u-tokyo.ac.jp
Link: https://lore.kernel.org/r/20241218024415.2494267-3-joe@pf.is.s.u-tokyo.ac.jp
[krzysztof: applied v1, adjust the commit msg to incorporate v2 parts]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
aemif_calc_rate() checks the validity of a new computed timing against a
'max' value given as input. This isn't convenient if we want to check
the CS timing configuration somewhere else in the code.
Wrap the verification of all the chip select's timing configuration into a
single function to ease its exportation in upcoming patches.
Remove the validity check from aemif_calc_rate(). Also remove the no
longer used 'max' input and change the return type to u32.
Remove the check of the aemif_calc_rate()'s return value during
device-tree parsing as aemif_calc_rate() can't fail anymore.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-5-bastien.curutchet@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The CS configuration register expects timings to be expressed in
'number of cycles - 1' but they are stored in ns in the struct
aemif_cs_data. So at init, the timings currently set are converted to ns
by aemif_get_hw_params(), updated with values from the device-tree
properties, and then converted back to 'number of cycles - 1' before
being applied.
Store the timings directly in 'number of cycles - 1' instead of
nanoseconds.
Perform the conversion from nanosecond during the device-tree parsing.
Remove aemif_cycles_to_nsec() as it isn't used anymore.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241204094319.1050826-2-bastien.curutchet@bootlin.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The RZ/{G2L,G2LC,V2L} SMARC EVK uses Micron MT25QU412A flash and RZ/G2UL
SMARC EVK uses Renesas AT25QL128A flash. With current pin setting for
IOVF pin, 4-bit flash write fails for AT25QL128A flash. Use Hi-Z state
as the default for IOVF pin, so that spi controller driver in linux will
be independent of flash type.
To support this, during board production, the bit 4 of the NV config
register must be cleared by the bootloader for Micron flash.
Output from u-boot after clearing bit4 of NVCR register.
=> renesas_micron_flash_nvcr
SF: Detected mt25qu512a with page size 256 Bytes, erase size 64 KiB, total 64 MiB
NVCR=0xef
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240830203014.199326-2-biju.das.jz@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This reverts commit 23a641d5c2.
The first-level children of the aemif node are not the device nodes (ones
containing the 'compatible' property) but the chip-select nodes which
instead have their own children.
of_platform_populate() will skip such nodes so we must indeed iterate
over the direct children of the aemif node. The problem here is that we
never call of_platform_depopulate() as it takes the root device as
argument. We only have an unpopulated chip-select nodes so we will leak
these devices if any of the calls to of_platform_populate() fails.
I don't have a batter idea right now but my patch was not correct so we
need to revert it. While at it: at least use the scoped variant of the
OF node iterator. Down the line, we should find a better solution to fix
this potential resource leak in error path.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240824080235.56472-1-brgl@bgdev.pl
Fixes: 23a641d5c2 ("memory: ti-aemif: don't needlessly iterate over child nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
