Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
The current SDCA MBQ (Multi-Byte Quantities) register map only
supports 16-bit types, add support for more sizes and then update
the rt722 driver to use the new support. We also add support for
the deferring feature of MBQs to allow hardware to indicate it is
not currently ready to service a read/write.
Afraid I don't have hardware to test the rt722 change so it is
only build tested, but I thought it good to include a change to
demonstrate the new features in use.
The SDCA specification allows for controls to be deferred. In the case
of a deferred control the device will return COMMAND_IGNORED to the
8-bit operation that would cause the value to commit. Which is the
final 8-bits on a write, or the first 8-bits on a read. In the case of
receiving a defer, the regmap will poll the SDCA function busy bit,
after which the transaction will be retried, returning an error if the
function busy does not clear within a chip specific timeout. Since
this is common SDCA functionality which is the 99% use-case for MBQs
it makes sense to incorporate this functionality into the register
map. If no MBQ configuration is specified, the behaviour will default
to the existing behaviour.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-5-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
SoundWire MBQ register maps typically contain a variety of register
sizes, which doesn't map ideally to the regmap abstraction which
expects register maps to have a consistent size. Currently the MBQ
register map only allows 16-bit registers to be defined, however
this leads to complex CODEC driver implementations with an 8-bit
register map and a 16-bit MBQ, every control will then have a custom
get and put handler that allows them to access different register
maps. Further more 32-bit MBQ quantities are not currently supported.
Add support for additional MBQ sizes and to avoid the complexity
of multiple register maps treat the val_size as a maximum size for
the register map. Within the regmap use an ancillary callback to
determine how many bytes to actually read/write to the hardware for
a specific register. In the case that no callback is defined the
behaviour defaults back to the existing behaviour of a fixed size
register map.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-4-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
Two patches move the code to use BITS_TO_BYTES(), while the last
one otpimizes the code generation on x86 (32- and 64-bit on different
compilers).
On x86 the compiler (gcc (Debian 14.2.0-8) 14.2.0) may generate
a better code if it sees division and modulo goes together.
Function old new delta
__regmap_init 3740 3732 -8
Total: Before=31159, After=31151, chg -0.03%
clang (Debian clang version 18.1.8) on x86_64 still shows better code
Function old new delta
__regmap_init 3582 3579 -3
Total: Before=39854, After=39851, chg -0.01%
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241121105838.4073659-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lockdep gives a false positive splat as it can't distinguish the lock
which is taken by different IRQ descriptors from different IRQ chips
that are organized in a way of a hierarchy:
======================================================
WARNING: possible circular locking dependency detected
6.12.0-rc5-next-20241101-00148-g9fabf8160b53 #562 Tainted: G W
------------------------------------------------------
modprobe/141 is trying to acquire lock:
ffff899446947868 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}, at: regmap_update_bits_base+0x33/0x90
but task is already holding lock:
ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
which lock already depends on the new lock.
-> #3 (&d->lock){+.+.}-{4:4}:
-> #2 (&desc->request_mutex){+.+.}-{4:4}:
-> #1 (ipclock){+.+.}-{4:4}:
-> #0 (intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock){+.+.}-{4:4}:
Chain exists of:
intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock --> &desc->request_mutex --> &d->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&d->lock);
lock(&desc->request_mutex);
lock(&d->lock);
lock(intel_soc_pmic_bxtwc:502:(&bxtwc_regmap_config)->lock);
*** DEADLOCK ***
3 locks held by modprobe/141:
#0: ffff8994419368f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xf6/0x250
#1: ffff89944690b250 (&desc->request_mutex){+.+.}-{4:4}, at: __setup_irq+0x1a2/0x790
#2: ffff899446947c68 (&d->lock){+.+.}-{4:4}, at: __setup_irq+0x682/0x790
Set a lockdep class when we map the IRQ so that it doesn't warn about
a lockdep bug that doesn't exist.
Fixes: 4af8be67fd ("regmap: Convert regmap_irq to use irq_domain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241101165553.4055617-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases when using the maple tree register cache, the lockdep
validator might complain about invalid deadlocks:
[7.131886] Possible interrupt unsafe locking scenario:
[7.131890] CPU0 CPU1
[7.131893] ---- ----
[7.131896] lock(&mt->ma_lock);
[7.131904] local_irq_disable();
[7.131907] lock(rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock);
[7.131916] lock(&mt->ma_lock);
[7.131925] <Interrupt>
[7.131928] lock(rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock);
[7.131936]
*** DEADLOCK ***
[7.131939] no locks held by swapper/0/0.
[7.131944]
the shortest dependencies between 2nd lock and 1st lock:
[7.131950] -> (&mt->ma_lock){+.+.}-{2:2} {
[7.131966] HARDIRQ-ON-W at:
[7.131973] lock_acquire+0x200/0x330
[7.131986] _raw_spin_lock+0x50/0x70
[7.131998] regcache_maple_write+0x68/0xe0
[7.132010] regcache_write+0x6c/0x90
[7.132019] _regmap_read+0x19c/0x1d0
[7.132029] _regmap_update_bits+0xc0/0x148
[7.132038] regmap_update_bits_base+0x6c/0xa8
[7.132048] rk8xx_probe+0x22c/0x3d8
[7.132057] rk8xx_spi_probe+0x74/0x88
[7.132065] spi_probe+0xa8/0xe0
[...]
[7.132675] }
[7.132678] ... key at: [<ffff800082943c20>] __key.0+0x0/0x10
[7.132691] ... acquired at:
[7.132695] _raw_spin_lock+0x50/0x70
[7.132704] regcache_maple_write+0x68/0xe0
[7.132714] regcache_write+0x6c/0x90
[7.132724] _regmap_read+0x19c/0x1d0
[7.132732] _regmap_update_bits+0xc0/0x148
[7.132741] regmap_field_update_bits_base+0x74/0xb8
[7.132751] vop2_plane_atomic_update+0x480/0x14d8 [rockchipdrm]
[7.132820] drm_atomic_helper_commit_planes+0x1a0/0x320 [drm_kms_helper]
[...]
[7.135112] -> (rockchip_drm_vop2:3114:(&vop2_regmap_config)->lock){-...}-{2:2} {
[7.135130] IN-HARDIRQ-W at:
[7.135136] lock_acquire+0x200/0x330
[7.135147] _raw_spin_lock_irqsave+0x6c/0x98
[7.135157] regmap_lock_spinlock+0x20/0x40
[7.135166] regmap_read+0x44/0x90
[7.135175] vop2_isr+0x90/0x290 [rockchipdrm]
[7.135225] __handle_irq_event_percpu+0x124/0x2d0
In the example above, the validator seems to get the scope of
dependencies wrong, since the regmap instance used in rk8xx-spi driver
has nothing to do with the instance from vop2.
Improve validation by sharing the regmap's lockdep class with the maple
tree's internal lock, while also providing a subclass for the latter.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20241031-regmap-maple-lockdep-fix-v2-1-06a3710f3623@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Since 0 can look a lot like a NULL pointer when used in a cache some clever
data structures might potentially introduce bugs specific to handling it.
Add some explicit testing of storing 0 as a value in a sparse cache, at the
minute there are no issues and this will stop any appearing in the future.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240924-regcache-zero-value-v1-1-8a1224214b52@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
By default regmap uses a mutex to protect the regmap but we also support
other kinds of locking, including spinlocks, which can have an impact
especially around allocations. Ensure that we are covering the spinlock
case by running tests configured using fast I/O, this causes the core to
use a spinlock instead of a mutex. Running every single test would be
redundant but cover most of them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240901-regmap-test-fast-io-v1-1-aad83a871bcc@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit fd4ebc07b4 ("regmap: Hold the regmap lock when allocating and
freeing the cache") introduced a locking around the allocating and
freeing a regmap cache, so adjust the memory allocation flags to the ones
given in the regmap configuration instead of the hardcoded GFP_KERNEL.
This fixes the "BUG: sleeping function called from invalid context"
introduced by the mentioned commit.
Fixes: fd4ebc07b4 ("regmap: Hold the regmap lock when allocating and freeing the cache")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20240828122834.3778031-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
