Align implementation with memcpy and memmove where also remaining bytes are
copied via final switch case instead of using simple implementations which
loop. But this alignment has much stronger reason and definitely aligning
implementation is not the key point here. It is just good to have in mind
that the same technique is used already there.
In GCC 10, now -ftree-loop-distribute-patterns optimization is on at O2.
This optimization causes GCC to convert the while loop in memset.c into a
call to memset.
So this optimization is transforming a loop in a memset/memcpy into a call
to the function itself. This makes the memset implementation as recursive.
"-freestanding" option will disable the built-in library function but it
has been added in generic library implementation.
In default microblaze kernel defconfig we have CONFIG_OPT_LIB_FUNCTION
enabled so it will always pick optimized version of memset which is target
specific so we are replacing the while() loop with switch case to avoid
recursive memset call.
Issue with freestanding was already discussed in connection to commit
33d0f96ffd ("lib/string.c: Use freestanding environment") and also this
is topic in glibc and gcc.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56888http://patchwork.ozlabs.org/project/glibc/patch/20191121021040.14554-1-sandra@codesourcery.com/
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com>
Link: https://lore.kernel.org/r/10a432e269a6d3349cf458e4f5792522779cba0d.1645797329.git.michal.simek@xilinx.com
On microblaze systems which are not using OPT_LIB_FUNCTION only simple
memset is used. This function is already implemented in lib/string.c that's
why it should be used instead.
This change is done in respect of issue fixed by commit 33d0f96ffd
("lib/string.c: Use freestanding environment") where gcc-10.x moved
-ftree-loop-distribute-patterns optimization is to O2 optimization level.
This optimization causes GCC to convert the while loop in memset.c into a
call to memset. So This optimization is transforming a loop in a
memset/memcpy into a call to the function itself. This makes the memset
implementation as recursive.
Based on fix above -ffreestanding was used and it needs to be used on
Microblaze too but the patch is not adding this flag it removes simple
implementation to cause that generic implementation is used where this flag
is already setup.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com>
Link: https://lore.kernel.org/r/4a143e7654f72ee893dcea9769946e17d3570b16.1645797329.git.michal.simek@xilinx.com
Remove the microblaze implemenation of strncpy/strnlen and instead use
the generic versions. The microblaze version is fairly slow because it
always does byte accesses even for aligned data, and it lacks a checks
for user_addr_max().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix "fallthrough" warnings in microblaze memcpy/memset/memmove
library functions.
CC arch/microblaze/lib/memcpy.o
../arch/microblaze/lib/memcpy.c: In function 'memcpy':
../arch/microblaze/lib/memcpy.c:70:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
70 | --c;
../arch/microblaze/lib/memcpy.c:71:3: note: here
71 | case 2:
../arch/microblaze/lib/memcpy.c:73:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
73 | --c;
../arch/microblaze/lib/memcpy.c:74:3: note: here
74 | case 3:
../arch/microblaze/lib/memcpy.c:178:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
178 | *dst++ = *src++;
../arch/microblaze/lib/memcpy.c:179:2: note: here
179 | case 2:
../arch/microblaze/lib/memcpy.c:180:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
180 | *dst++ = *src++;
../arch/microblaze/lib/memcpy.c:181:2: note: here
181 | case 1:
CC arch/microblaze/lib/memset.o
../arch/microblaze/lib/memset.c: In function 'memset':
../arch/microblaze/lib/memset.c:71:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
71 | --n;
../arch/microblaze/lib/memset.c:72:3: note: here
72 | case 2:
../arch/microblaze/lib/memset.c:74:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
74 | --n;
../arch/microblaze/lib/memset.c:75:3: note: here
75 | case 3:
CC arch/microblaze/lib/memmove.o
../arch/microblaze/lib/memmove.c: In function 'memmove':
../arch/microblaze/lib/memmove.c:92:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
92 | --c;
../arch/microblaze/lib/memmove.c:93:3: note: here
93 | case 2:
../arch/microblaze/lib/memmove.c:95:4: warning: this statement may fall through [-Wimplicit-fallthrough=]
95 | --c;
../arch/microblaze/lib/memmove.c:96:3: note: here
96 | case 1:
../arch/microblaze/lib/memmove.c:203:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
203 | *--dst = *--src;
../arch/microblaze/lib/memmove.c:204:2: note: here
204 | case 3:
../arch/microblaze/lib/memmove.c:205:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
205 | *--dst = *--src;
../arch/microblaze/lib/memmove.c:206:2: note: here
206 | case 2:
../arch/microblaze/lib/memmove.c:207:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
207 | *--dst = *--src;
../arch/microblaze/lib/memmove.c:208:2: note: here
208 | case 1:
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Simek <monstr@monstr.eu>
Link: https://lore.kernel.org/r/20210421022041.10689-1-rdunlap@infradead.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The patch:
"microblaze: Setup proper dependency for optimized lib functions"
(sha1: 7b6ce52be3)
didn't setup all dependencies properly.
Optimized lib functions in C are also present for little endian
and optimized library functions in assembler are implemented only for
big endian version.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Following precedence set by MIPs:
"[MIPS] Change libgcc-style functions from lib-y to obj-y"
(sha1: f7c2778151),
switch the goal definition for kbuild to obj-y to ensure
object files linked in vmlinux if only modules were users
of these functions.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Based on the patch:
"lib: reduce the use of module.h wherever possible"
(sha1: 8bc3bcc93a)
fix all microblaze files which are not modules.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Problem happens when len in strncpy_from_user is setup
and passing string has len-1 chars + \0 terminated
character. In this case was returned incorrect length
of the string.
It should always retunrs the length of the string
(not including the trailing NULL).
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Function declarations fix these sparse warnings:
arch/microblaze/lib/ashldi3.c:5:11: warning: symbol
'__ashldi3' was not declared. Should it be static?
arch/microblaze/lib/muldi3.c:50:8: warning: symbol
'__muldi3' was not declared. Should it be static?
arch/microblaze/lib/cmpdi2.c:5:11: warning: symbol
'__cmpdi2' was not declared. Should it be static?
arch/microblaze/lib/lshrdi3.c:5:11: warning: symbol
'__lshrdi3' was not declared. Should it be static?
arch/microblaze/lib/ashrdi3.c:5:11: warning: symbol
'__ashrdi3' was not declared. Should it be static?
arch/microblaze/lib/ucmpdi2.c:5:11: warning: symbol
'__ucmpdi2' was not declared. Should it be static?
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
If access to user space failed we need to reconstruct
stack pointer and restore all register.
This patch fixed problem introduces by:
"microblaze: Add loop unrolling for PAGE in copy_tofrom_user"
(sha1: ebe211254b)
Signed-off-by: Michal Simek <monstr@monstr.eu>
Add missing __ucmpdi2 helper function.
Error log:
kernel/built-in.o: In function `print_graph_duration':
: undefined reference to `__ucmpdi2'
kernel/built-in.o: In function `print_graph_duration':
: undefined reference to `__ucmpdi2'
Based on MIPS code.
Signed-off-by: Michal Simek <monstr@monstr.eu>
