Change "dmpstore" to show name of known variable vendor GUID.
The name is got from ShellProtocol.GetGuidName().
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Huajing Li <huajing.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch dumps memory map information for all memory types.
But to follow the SFO format of "memmap" defined in Shell 2.2 spec,
the patch doesn't dump the memory map information for OEM/OS
memory types. But it does include the OEM/OS memory in the total
size in SFO format.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The implementation was already there but through a private flag
"-_e". The patch removes "-_e" support and add "-ec" support.
Removing old "-_e" support makes the pci command more clean.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch adds the "-sfo" support to "dmpstore" command.
When -l or -d is specified, -sfo is not supported.
When the variable specified by name and GUID cannot be found,
an error message is displayed; Otherwise, the SFO is displayed.
E.g.: "dmpstore -guid GuidThatDoesntExist -sfo" produces output
as:
ShellCommand,"dmpstore"
VariableInfo,"","GuidThatDoesntExist","","",""
"dmpstore NameThatDoesntExist -guid GuidThatDoesntExist -sfo"
produces output as:
ShellCommand,"dmpstore"
dmpstore: No matching variables found. Guid GuidThatDoesntExist, Name
NameThatDoesntExist
The difference between the above 2 cases is that former one only
specifies the GUID, but the latter one specifies both name and GUID.
Since not specifying GUID means to use GlobalVariableGuid,
"dmpstore NameThatDoesntExist -sfo" produces the similar output as
latter one.
I personally prefer to always produce SFO output for both cases.
But the above behavior is the discussion result between HPE engineers.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>
As per ECR 1416, latest UEFI Shell 2.2 Specification has added Persistent
Memory support in 'memmap' command.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Use DOS format end of line(CR, LF).
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Fix SMBIOSVIEW decode of the HeaderLog fields of the PCIe
AER structure . The PCIe 2.1 Base Specification, section 7.10, lists
this as 16 bytes, or 4 DWORDs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In multiple root bridge platforms, different root bridges may
share the same segment but occupy different range of buses,
or may occupy different segments.
The fix is to find the correct root bridge IO instance by
comparing not only the segment but also the bus ranges.
It tries to access the MMIO and IO in the following order:
PciRootBridgeIo, CpuIo and direct IO.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19181 6f19259b-4bc3-4df7-8a09-765794883524
Since Shell will remove the quotes in parameters, setvar cannot receive the quotes from ="ascii" or =L"unicode". User should add ^ to escape quotes in setvar data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18454 6f19259b-4bc3-4df7-8a09-765794883524
Serial console driver may not support all databits / stopbits attribute values.
But ‘sermode’ command only displays a general error indicating operation failure.
Instead it should decode error status and report more accurate error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17978 6f19259b-4bc3-4df7-8a09-765794883524
Updates to various profile commands help and error message output with better wordings.
Fix few inconsistency issues found in error messages across various profile commands.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17032 6f19259b-4bc3-4df7-8a09-765794883524
Updates to Debug1 profile commands response output.
Updating Debug1 profile commands source code to include command name as a prefix in error message.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16729 6f19259b-4bc3-4df7-8a09-765794883524
Huajing Li
Ruiyu Ni
Chen A Chen
Star Zeng
Tapan Shah
Qiu Shumin
Samer El-Haj-Mahmoud
Jordan Justen
Tapan Shah
Laszlo Ersek
Jaben Carsey
Samer El-Haj-Mahmoud elhaj
Chris Phillips