That is loading and processing on-disk capsules during the same boot
without relocating the capsules to a dedicated non-volatile storage on
ESP or loading them as in-RAM capsules and then rebooting.
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
MdeModulePkg changes
--------------------
Allow reusing functions by other packages, specifically by
DasharoPayloadPkg.
* Move GetStringWidth() to CustomizedDisplayLib.
* Move CreateMultiStringPopUp() to CustomizedDisplayLib
CreateSharedPopUp() is an implementation of it and is moved as well
(not used for anything else).
DasharoPayloadPkg changes
----------------------
Parse coreboot information about recovery boot and display a dialog
using functions moved to CustomizedDisplayLib library of MdeModulePkg.
* Add ParseVBootWorkbuf() function
Extracts information about vboot recovery from coreboot table.
Ignore minor version of cb_vboot_workbuf_v2 while parsing because it
doesn't seem to affect data layout and therefore shouldn't be the
reason for aborting parsing of the structure.
* Inform user via popup if in recovery boot.
The popup explains what happened along with possible reasons.
It disappears automatically after a timeout of 30 seconds or
when user presses Enter.
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
UEFI 2.10A Specification has added a new error case to
EFI_ATA_PASS_THRU_PROTOCOL.GetNextDevice API which handles
port multiplier not being connected to the Port.
Signed-off-by: Sachin Ganesh <sachinganesh@ami.com>
Add a late initialize in DxeMain for the debug agent. This is required
for the debug agent to be able to setup events to handle image loads,
exit boot services, and other important callbacks.
Define a reinitialize debug agent.
Signed-off-by: Aaron Pop <aaronpop@microsoft.com>
- Class specific types for interface and endpoint are generic
- Definitions are in IndustryStandard/Usb.h
- Remove type redefinitions
- Update references to the descriptor types
Signed-off-by: Oleg Ilyasov <olegi@ami.com>
Implementation of MEDIA_SANITIZE_PROTOCOL for NIST
purge/clear actions with mapping to NVM Express native
commands.
Signed-off-by: Aaron Pop <aaronpop@microsoft.com>
The MM communicate buffer facilitates data sharing between non-MM
and MM code.
The MM IPL code allocates a "fixed" runtime type memory as the MM
communication buffer, and communicates its address and size to MM
Core via MmCommBuffer GUIDed HOB.
Here, "fixed" implies that the buffer's location remains constant
throughout the boot process.
Data is exchanged between the MM Communication PPI/Protocol and a
software MMI handler using this fixed MM communication buffer.
Signed-off-by: Hongbin1 Zhang <hongbin1.zhang@intel.com>
Co-authored-by: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Co-authored-by: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Cc: Dun Tan <dun.tan@intel.com>
Cc: Yuanhao Xie <yuanhao.xie@intel.com>
REF : https://bugzilla.tianocore.org/show_bug.cgi?id=4750
Migrate the FV that doesn't contain the currently executing PEI Core
when permanent memory is initialized but PEI Core is still potentially
running from faster memory (Tepmorary RAM). This may reduce the time
required to migrate FVs to permanent memory. The FV containing PEI
Core is migrated after the PEI Core reentry when it is executed from
permanent memory.
This may or may not improve performance depending on the behavior of
temporary RAM and the actual performance changes must be measured with
the feature enabled and disabled.
This migration algorithm is only used for FVs specified in the
gEdkiiMigrationInfoGuid HOB and built with flag
FLAGS_FV_MIGRATE_BEFORE_PEI_CORE_REENTRY.
Signed-off-by: Awiral Shrivastava <awiral.shrivastava@intel.com>
Fire an event if a long delay occurs when starting an NVMe device.
This can be used by platforms to draw pictures on the screen or
take other actions to notify a user or move boot forward.
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Interface PrintHobList() is added to dump all HOBs info in the HobList.
Caller could specify a custom HOB print handler to replace the default
print handler when calling the interface.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
This commit defines VARIABLE_RUNTIME_CACHE_INFO HOB.
The HOB is used to store the address and size of the
buffer that will be used for variable runtime service
when the PcdEnableVariableRuntimeCache is TRUE.
In following patches, when PcdEnableVariableRuntimeCache
is TRUE, VariablePei module will install a callback of
gEfiPeiMemoryDiscoveredPpiGuid to allocate needed buffer
for different type cache, unblock the buffer and build HOB.
Then VariableSmmRuntimeDxe driver will consume the
gEdkiiVariableRuntimeCacheInfoHobGuid to initialize the
variable runtime cache related content.
Signed-off-by: Dun Tan <dun.tan@intel.com>
This MpService2Ppi field in SMM_S3_RESUME_STATE is used to
wakeup AP to do the CPU initialization during smm s3 boot when
the execution mode of PEI and DXE are the same.
Currently, in CpuS3.c of smm cpu driver, BSP doesn't need to
wakeup AP anymore. The initialization for AP will be done in
S3Resume.c before transfer to CpuS3.c of smm cpu driver.
So we can remove the MpService2Ppi field in SMM_S3_RESUME_STATE.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding NULL SpiHcPlatformLib instance. This library is responsible for
handling the low level details of the SPI host controller. Since this is
platform specific this library will be dependent on OEM SPI
implementation. The SPI host controller layer will utilize this library
for SPI bus transactions.
Bugzilla #4753
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
Signed-off-by: Brit Chesley <brit.chesley@amd.com>
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Provide an optional method for PEI to declare a specific address
range to use for the Memory Type Information bins. The current
algorithm uses heuristics that tends to place the Memory Type
Information bins in the same location, but memory configuration
changes across boots or algorithm changes across a firmware
updates could potentially change the Memory Type Information bin
location. If the bin locations move across an S4 save/resume
cycle, then the S4 resume may fail. Enabling this feature
increases the number of scenarios that an S4 resume operation
may succeed.
If the HOB List contains a Resource Descriptor HOB that
describes tested system memory and has an Owner GUID of
gEfiMemoryTypeInformationGuid, then use the address range
described by the Resource Descriptor HOB as the preferred
location of the Memory Type Information bins. If this HOB is
not detected, then the current behavior is preserved.
The HOB with an Owner GUID of gEfiMemoryTypeInformationGuid
is ignored for the following conditions:
* The HOB with an Owner GUID of gEfiMemoryTypeInformationGuid
is smaller than the Memory Type Information bins.
* The HOB list contains more than one Resource Descriptor HOB
with an owner GUID of gEfiMemoryTypeInformationGuid.
* The Resource Descriptor HOB with an Owner GUID of
gEfiMemoryTypeInformationGuid is the same Resource Descriptor
HOB that that describes the PHIT memory range.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Aaron Li <aaron.li@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4533
There are use cases which not all FVs need be migrated from TempRam to
permanent memory before TempRam tears down. This new guid is introduced
to avoid unnecessary FV migration to improve boot performance. Platform
can publish MigrationInfo hob with this guid to customize FV migration
info, and PeiCore will only migrate FVs indicated by this Hob info.
This is a backwards compatible change, PeiCore will check MigrationInfo
hob before migration. If MigrationInfo hobs exists, only migrate FVs
recorded by hobs. If MigrationInfo hobs not exists, migrate all FVs to
permanent memory.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Cheng Sun <chengx.sun@intel.com>
Update function headers to clarify the contract of each function and
improve readability. Add NULL checks to all functions that take a
pointer as an argument. Add return status to functions that
may need to return early due to invalid input.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
